Project Veloci

[MH3.0R]

Can lend you a go pro hero 2

Thanks, but already got a hero.

One for dash/shifter view, 1 for pedals, etc

Ah, yes! Thinking outside the square! Well, I will try with one 1st and then see what the results yield, then get back to you if needed. The GoPro's have a pretty wide angle and if positioned correctly could probably capture it all.

In an auto though, not much interest in the pedals, although it would confirm throttle position.

[jslayz]

Ohh cant wait for this vid

[Tradewind]

Go you good thing!

[bass_straitener]

Just got my 2nd ROM from Matt via Bryce and about to hit the garage after bath time!

Have you got out the bath yet and installed your ROM?

The auto transmission world is waiting on your review.

[SegR]

No review. He's pruning it up, the cold Melbourne air has turned his water into an ice bath and a small chorizo floats on the surface.

[bass_straitener]

No review. He's pruning it up, the cold Melbourne air has turned his water into an ice bath and a small chorizo floats on the surface.

Chorizo? More like chippolata.

[KiDo_Tuning]

Must be too busy out enjoying the car for once

[MH3.0R]

No review. He's pruning it up, the cold Melbourne air has turned his water into an ice bath and a small chorizo floats on the surface.

Chorizo? More like chippolata.

Sorry, forgot to post due to disappointing result. I guess the 1st step was such a dramatic improvement, I was not able to feel much difference in the 2nd step. COuld be that I have not flashed it correctly but, time will tell.

Main interest for me was the Logger definition (again which did not exist for my model/year/spec). Loaded it up last night and went for a drive (needed fuel anyway), but when I got home the Logs were empty. Seemed to be a red message flashing up very quickly in the lower left corner of RomRaider Logger. I think it had something to do with the CAL ID or ECU ID not being as expected somewhere. Again, could be my error and I will check it out when I have more time.

Bath was good! Anybody want to join in next time?

[bass_straitener]

Mark just checking if you have the latest version of the RomRaider software as I did notice the other day that your Learning View was a very old version.

[bigBADbenny]

Eurrgh! Heading for cold shower right now...

[MH3.0R]

Mark just checking if you have the latest version of the RomRaider software as I did notice the other day that your Learning View was a very old version.

Good point, so I am about to update. I have version 0.5.2 build 223 and am about to update to 0.5.4b

[KiDo_Tuning]

Learning View is also seperate to RomRaider

latest LV is here: http://www.romraider.com/forum/viewtopi ... =32&t=7397

I suspect the logger file I sent is too new

[MH3.0R]

Success with the Logger Def you sent me, at least with the latest version of RomRaider 054b.

Also loaded up with the latest ECU Def and Logger Def, but switched to the Logger def you provided. I will send you a copy of tonight's log file.

[SegR]

I've had a similar issue with RomRaider logger before. Just check it's recording data before driving too far - open the text file to confirm. I can't remember what I figured out seems to cause it; I'd have to check my e-mails. I think it might have been loading a logger profile which increased the chances of it happening.

[KiDo_Tuning]

Success with the Logger Def you sent me, at least with the latest version of RomRaider 054b.

Also loaded up with the latest ECU Def and Logger Def, but switched to the Logger def you provided. I will send you a copy of tonight's log file.

Logger is working I have built a new tune already, pretty confident on how it will turn out