Australian Liberty Owners Club
Coils in an outback
11 posts
• Page 1 of 1
Coils in an outback
by Mat04 » Fri May 11, 2012 11:37 am
Hi everyone I'm thinking about purchasing a gen 4 outback and was wondering if my coil overs in the wife's gen 4 liberty would fit and work on a outback of similar year?
owner and operator of offset Custom welding and fabrications.
-
Mat04 - Posts: 1255
- Joined: Tue Sep 27, 2011 7:53 am
- Location: Campbelltown
- Car: 03 my04 slammed outback
- Real name: Matt
Re: Coils in an outback
by sheppo9 » Fri May 11, 2012 12:50 pm
Yes.
Need to "de-lift" if your going to dump it or the CV's will be at silly angles.
Or lower it a couple of inches only and not worry about it.
Need to "de-lift" if your going to dump it or the CV's will be at silly angles.
Or lower it a couple of inches only and not worry about it.
-
sheppo9 - Posts: 552
- Joined: Mon Aug 25, 2008 12:44 pm
- Location: ACT
- Car: An Outback
- Real name: Luke
Re: Coils in an outback
by Mat04 » Fri May 11, 2012 5:50 pm
What I de-lift?
owner and operator of offset Custom welding and fabrications.
-
Mat04 - Posts: 1255
- Joined: Tue Sep 27, 2011 7:53 am
- Location: Campbelltown
- Car: 03 my04 slammed outback
- Real name: Matt
Re: Coils in an outback
by bigBADbenny » Fri May 11, 2012 7:37 pm
I'm no expert but you'd need some different suspension components like camber bushes, links, ALK, RCA and maybe control arms to correct the lowered geometry, if going low... It could be a very cool look with the wide body-esque wheel arches over e.g. stretched tyres on wide rims.... 
-
bigBADbenny - Posts: 10474
- Joined: Tue Oct 04, 2011 6:36 pm
- Location: Collingwood, Melbourne
- Car: MY07 GT-B 6MT OBP Wagon
- Real name: Ben Richards
- Profile URL: http://tinyurl.com/agvbzop
Re: Coils in an outback
by Mat04 » Fri May 11, 2012 9:51 pm
That would be the look I'm heading towards I seen a picture today of a black 05 outback over in the states with white wheels, looks the part.
It seams like there is a lot more involved in getting an outback to lay sills or be close to it compared to a liberty. Maybe just dump the liberty and get an outback as family car.
It seams like there is a lot more involved in getting an outback to lay sills or be close to it compared to a liberty. Maybe just dump the liberty and get an outback as family car.
owner and operator of offset Custom welding and fabrications.
-
Mat04 - Posts: 1255
- Joined: Tue Sep 27, 2011 7:53 am
- Location: Campbelltown
- Car: 03 my04 slammed outback
- Real name: Matt
Re: Coils in an outback
by bigBADbenny » Fri May 11, 2012 10:17 pm
I drove a Foz the other day - lifted cars are so much fun, feel so bombproof!
But I like that lowered widebody look too...
I'm sure someone has attempted it here.
But I like that lowered widebody look too...
I'm sure someone has attempted it here.
-
bigBADbenny - Posts: 10474
- Joined: Tue Oct 04, 2011 6:36 pm
- Location: Collingwood, Melbourne
- Car: MY07 GT-B 6MT OBP Wagon
- Real name: Ben Richards
- Profile URL: http://tinyurl.com/agvbzop
Re: Coils in an outback
by Anson » Sat Jun 16, 2012 9:39 pm
Was fairly easy...
Anylower on the back and it's on the bumpstops...
Anylower on the back and it's on the bumpstops...
Last edited by Anson on Sat Jun 16, 2012 9:46 pm, edited 1 time in total.
-
Anson - Posts: 180
- Joined: Sat Mar 03, 2012 12:46 pm
- Car: 2006 Spec.B Wagon SC
-
rooby - Posts: 2186
- Joined: Tue May 31, 2011 12:09 am
- Location: Canberra
- Car: MY07 Liberty GT Spec.B
- Real name: Reuben
-
bigBADbenny - Posts: 10474
- Joined: Tue Oct 04, 2011 6:36 pm
- Location: Collingwood, Melbourne
- Car: MY07 GT-B 6MT OBP Wagon
- Real name: Ben Richards
- Profile URL: http://tinyurl.com/agvbzop
Re: Coils in an outback
by Anson » Sun Jun 17, 2012 12:30 am
Useing these http://www.pedders.com.au/newsite/products/sportsryder-extreme-xa-adjustable-coil-overs-1339030582/sportsryder-extreme-xa-coil-over-suspension--1338860326
Not all that good for performance, but i'm happy with how the car looks...
Not all that good for performance, but i'm happy with how the car looks...
-
Anson - Posts: 180
- Joined: Sat Mar 03, 2012 12:46 pm
- Car: 2006 Spec.B Wagon SC
Re: Coils in an outback
by rooby » Sun Jun 17, 2012 10:50 am
Anson wrote:Useing these http://www.pedders.com.au/newsite/products/sportsryder-extreme-xa-adjustable-coil-overs-1339030582/sportsryder-extreme-xa-coil-over-suspension--1338860326
Not all that good for performance, but i'm happy with how the car looks...
Have you just done coilovers or also other supporting mods.
Mark has a list of supporting mods for a low outback here if you haven't seen viewtopic.php?f=10&t=14609&start=195#p236539
-
rooby - Posts: 2186
- Joined: Tue May 31, 2011 12:09 am
- Location: Canberra
- Car: MY07 Liberty GT Spec.B
- Real name: Reuben
11 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest