Any pointers on how to do this on a Gen 4 3RB? I can change every other fluid on my car,figure it's time i learn how to do this.
Cheers,
Cliffo
Australian Liberty Owners Club
Changing clutch fluid?
4 posts
• Page 1 of 1
Changing clutch fluid?
by cliffo3rb » Tue Jun 05, 2012 1:44 pm
-
cliffo3rb - Posts: 709
- Joined: Thu May 13, 2010 9:07 am
- Location: Central Coast,NSW
- Car: MY05 Liberty 3.0rb
- Real name: Cliffo
Re: Changing clutch fluid?
by Dropz » Tue Jun 05, 2012 9:15 pm
Same way you bleed brake fluid, 2 people. one holds the pedal down, the other cracks the bleed nipple on the slave cylinder, release pressure, then tighten nipple. raise clutch pedal and repeat.
the clutch pedal will need to be pulled up by hand as there will be no pressure in the system to spring it back to its normal position. after bleeding pump it a few times by hand and it should be good again.
the clutch pedal will need to be pulled up by hand as there will be no pressure in the system to spring it back to its normal position. after bleeding pump it a few times by hand and it should be good again.
Built not bought, it's a way of life.
-
Dropz - Posts: 1710
- Joined: Tue Apr 26, 2011 9:50 pm
- Location: Adelaide
- Real name: Karl
- Profile URL: viewtopic.php?f=10&t=17921
-
cliffo3rb - Posts: 709
- Joined: Thu May 13, 2010 9:07 am
- Location: Central Coast,NSW
- Car: MY05 Liberty 3.0rb
- Real name: Cliffo
Re: Changing clutch fluid?
by kikxz » Sat Jan 05, 2013 2:40 pm
Another question i didnt need to ask cheers
-
kikxz - Posts: 198
- Joined: Fri Jan 20, 2012 3:34 pm
- Location: Melbourne
- Car: MY06 GTSTI
- Real name: Rocky
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests