Springs, shock absorbers, swaybars,
Brakes, Wheels and Tyres
by Doyab » Sun May 20, 2012 11:07 pm
Hi there as most most of you know I got some wheels with agressive offset. 18x8.5/+38 with 235/40/18. tomorrow it's going for a raise and camber adjustment. I'll raise it 30mm in rear and 25 in front. Now what is most amount of camber I should go for without going overkill? Front and rear. Keep in mind I have coilovers? Thanks need answers urgently
-
Doyab
-
- Posts: 383
- Joined: Fri Oct 22, 2010 5:19 pm
- Location: Sunbury Victoria
- Car: 2005 3.0RB
- Real name: Jake
by drndrn » Mon May 21, 2012 8:59 am
I believe stock is F: 0 R: 0
It really depends on what your plans for your car is (track or street).
I was able to run -3.5 at front without any uneven tyre wear, from what I hear toe affects uneven tyre wear more than camber would.
Diamond Grey 2.5i Heritage
-

drndrn
- -stickered-
-
- Posts: 1498
- Joined: Thu Mar 20, 2008 2:15 pm
- Location: Glen Waverley, Victoria
- Car: MY08 Subaru Liberty
by cruisn » Mon May 21, 2012 12:22 pm
Put some rear camber bushes in and add a little more camber all round.
Raise it 15mm front and 10mm rear and it should be apples.

-

cruisn
-
- Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
by augo » Wed May 23, 2012 10:37 pm
Negative 2 all round probably wouldn't hurt.
Just max it out, they're only tyres!

-
augo
-
- Posts: 161
- Joined: Thu Jan 12, 2012 8:30 pm
- Location: Melbourne
- Car: B-Spec Wagon
Return to Suspension, Brakes, Wheels and Tyres.
Who is online
Users browsing this forum: No registered users and 13 guests