AVCS Fault

Posts specific to the 3.0 litre NA H6 engine

AVCS Fault

Postby conkyd » Wed May 16, 2012 5:12 pm

Just thought I would let you guys know - and ask if anyone else has experienced this?
Last week CEL came on with the cruise light flashing during normal driving. Took it to the mechanic and the code was that the right hand AVCS solenoid had been stuck. It has tried to release after advancing and couldn't.
It did at some stage after between then and going to the mechanic about 3 hrs later, car drove fine.
Cleared the CEL and been driving for several days fine.......

Not too worried at this stage but it isnt a common thing as far as I am aware?
User avatar
conkyd
 
Posts: 61
Joined: Tue Aug 30, 2011 9:55 am
Location: Canberra
Car: MY07 Spec B 3.0 Wagon
Real name: Andrew

Re: AVCS Fault

Postby Tradewind » Wed May 16, 2012 5:16 pm

I have had it occur too

Seems part of life with some of them from my experience
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2040
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: AVCS Fault

Postby bass_straitener » Wed May 16, 2012 5:23 pm

This fault is often related to cars with dirty oil.

When was your last oil change?

Here's a link.

http://legacygt.com/forums/showthread.p ... ml?t=18887
"If A is a success in life, then A equals x plus y plus z. Work is x; y is play; and z is keeping your mouth shut."
User avatar
bass_straitener
-stickered-
 
Posts: 2247
Joined: Mon Jul 25, 2011 8:31 pm
Location: Melbourne, Victoria
Car: MY12 C63
Real name: Bruce
Profile URL: viewtopic.php?f=10&t=14781

Re: AVCS Fault

Postby MH3.0R » Wed May 16, 2012 8:19 pm

I also got similar issues when the left bank sensor got dirty (after head works by Subaru). Anyway, they cleaned the sensor (think it was the cam sensor from memory) and since then, be fine. Used to make some great Porsche like noises on occasions when the left and right banks were at different cam advance angles! But also felt like the engine was fighting itself! And a noticeable loss of power!
MY15 Jaguar XFR-S 5.0 V8 SC 8AT White Saloon (Stock - nothing more to do with 400+ KW :))
MY11 Jaguar XFS 3.0DTT 6AT White Saloon (Prepped for sale)
MY19 Subaru XV 2.0iS the shopping trolley and weekend all terrain cruiser!
User avatar
MH3.0R
-stickered-
 
Posts: 2090
Joined: Sat Apr 12, 2008 9:29 am
Location: Melbourne, Vic
Real name: Mark
Profile URL: viewtopic.php?f=10&t=12969#p176433

Re: AVCS Fault

Postby bosc0 » Thu May 17, 2012 7:14 am

bass_straitener wrote:This fault is often related to cars with dirty oil.

When was your last oil change?

Here's a link.

http://legacygt.com/forums/showthread.p ... ml?t=18887


FYI The OCV is very very easy to remove and clean. Is Bruce, Batman?
User avatar
bosc0
 
Posts: 2637
Joined: Thu May 08, 2008 8:22 am
Location: Melbourne
Car: GT SpecB wagon
Real name: Jake

Re: AVCS Fault

Postby conkyd » Thu May 17, 2012 9:23 pm

thanks for the responses.

FYI I am a bit pedantic about oil and do changes every 6250kms
User avatar
conkyd
 
Posts: 61
Joined: Tue Aug 30, 2011 9:55 am
Location: Canberra
Car: MY07 Spec B 3.0 Wagon
Real name: Andrew

Re: AVCS Fault

Postby bass_straitener » Thu May 17, 2012 9:50 pm

conkyd wrote:thanks for the responses.

FYI I am a bit pedantic about oil and do changes every 6250kms


Sorry Andrew didn't mean in any way to insinuate you were slack in maintenance.

It could be anything that causes it and the link shows the Subaru ObdII code, with causes etc.

Also a fix should it happen again.
"If A is a success in life, then A equals x plus y plus z. Work is x; y is play; and z is keeping your mouth shut."
User avatar
bass_straitener
-stickered-
 
Posts: 2247
Joined: Mon Jul 25, 2011 8:31 pm
Location: Melbourne, Victoria
Car: MY12 C63
Real name: Bruce
Profile URL: viewtopic.php?f=10&t=14781

Re: AVCS Fault

Postby <GB> » Sat May 19, 2012 3:26 pm

I often see cars with blocked solinoids for VCt, vvt they often have a mesh filter before the solinoids to stop crap getting in them, not sure if that's the case with the subaru motor, we normally clean them and sometimes they are ok, fresh oil often helps and if ur really keen... Not that I would do this to my car but lifter lube or an oil flush stuff put in can often help...
<GB>
 
Posts: 2290
Joined: Tue Nov 22, 2011 9:05 am
Location: MELBOURNE
Car: 08 Liberty STI
Profile URL: viewtopic.php?f=18&t=14660

Re: AVCS Fault

Postby Tradewind » Mon May 28, 2012 2:35 pm

My oil changes are on time and oil is very clean, flushed as well, made no difference

How about this - Check your battery terminals are tight, discovered mine were loose (lord knows how) and upon tightening (while engine was idling) the engine idle quality and rpm changed as I tightened the terminals. Hmmmm, who would have guessed that one. This can fix a lot of weird issues
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2040
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: AVCS Fault

Postby jdm spec b » Mon May 28, 2012 8:04 pm

<GB> wrote:I often see cars with blocked solinoids for VCt, vvt they often have a mesh filter before the solinoids to stop crap getting in them, not sure if that's the case with the subaru motor, we normally clean them and sometimes they are ok, fresh oil often helps and if ur really keen... Not that I would do this to my car but lifter lube or an oil flush stuff put in can often help...


The same mesh filter that collapses and gets bits of plastic jammed in the AVCS solenoid, locking it at full advance?
User avatar
jdm spec b
 
Posts: 18
Joined: Sat May 19, 2012 4:56 pm
Location: Auckland, New Zealand
Car: 2005 Legacy 3.0R Spec B
Real name: Ryan


Return to 3.0R & 3.6R engine specific

Who is online

Users browsing this forum: No registered users and 11 guests