Australian Liberty Owners Club
OEM exhaust bit
4 posts
• Page 1 of 1
OEM exhaust bit
by Pundit » Wed May 02, 2012 8:18 pm
Having an exhaust mod done next week and after a discussion with "Barney the champion", things will be allot easier with a certain exhaust section. Namely,the 2 flanges along with bolts and springs from just behind cat #3. In the area of Hallam or Kangaroo Ground (Vic) would be a bonus!
-
Pundit - -stickered-
- Posts: 58
- Joined: Mon May 23, 2011 7:11 pm
- Location: Bend Of Islands, Victoria
- Car: MY05 3.0R 5AT, Honda CBR125R
- Real name: Keith
Re: OEM exhaust bit
by bass_straitener » Wed May 02, 2012 8:42 pm
G'day Keith,
I might have the bits you're after. They're off a LGT but should be the same.
I think you're coming down to dyno day. If so I'll bring them along for you to check out. Or if in the Blackburn area before that let me know and you can come over and check them out.
Cheers.
I might have the bits you're after. They're off a LGT but should be the same.
I think you're coming down to dyno day. If so I'll bring them along for you to check out. Or if in the Blackburn area before that let me know and you can come over and check them out.
Cheers.
"If A is a success in life, then A equals x plus y plus z. Work is x; y is play; and z is keeping your mouth shut."
-
bass_straitener - -stickered-
- Posts: 2247
- Joined: Mon Jul 25, 2011 8:31 pm
- Location: Melbourne, Victoria
- Car: MY12 C63
- Real name: Bruce
- Profile URL: viewtopic.php?f=10&t=14781
Re: OEM exhaust bit
by Pundit » Thu May 03, 2012 5:48 pm
Cool-ness, that'd be ultra handy! See you on Saturday, gonna be late too now I think of it........work 
. I'll be leaving Hallam at 12:30 and heading straight there so I'll see you in however long it takes. Thanks a bunch 
. I'll be leaving Hallam at 12:30 and heading straight there so I'll see you in however long it takes. Thanks a bunch -
Pundit - -stickered-
- Posts: 58
- Joined: Mon May 23, 2011 7:11 pm
- Location: Bend Of Islands, Victoria
- Car: MY05 3.0R 5AT, Honda CBR125R
- Real name: Keith
Re: OEM exhaust bit
by bass_straitener » Thu May 03, 2012 6:27 pm
No probs.
"If A is a success in life, then A equals x plus y plus z. Work is x; y is play; and z is keeping your mouth shut."
-
bass_straitener - -stickered-
- Posts: 2247
- Joined: Mon Jul 25, 2011 8:31 pm
- Location: Melbourne, Victoria
- Car: MY12 C63
- Real name: Bruce
- Profile URL: viewtopic.php?f=10&t=14781
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 9 guests