T.Renshaw34 - Project Liberty - JDM SPEC B FRONT END!

[Dropz]

I'll talk him into a 2.5 easily.

[t.renshaw34]

Will deffiantly be mid to top end power I'm building for. The bum dyno when my gt2530 opens up at around 4,000 tells me that the top end is a good place to be.

Might post some of the house work rather than the car work Mick .

[Dropz]

Been throwing mad engine codes, lights all intermittent operation. Was a fucked battery as I suggested the other day.

Ran out of brake fluid. RHR banjo connection on the brembo caliper is pissing fluid. Bolts tight so we will replace the washers Sunday and rebleed the brakes, also looking into braided rear lines. The washers were replaced with the brembo upgrade so possibly got a faulty washer. Now the caliper needs a respray and wheel needs a good clean.

[hamish_023]

Thats no good : (

All that trouble to get the yellow and black combo

[t.renshaw34]

Karl is now on the updates haha. Nice!

Once again you saved the day.

Hamish... Thinking yellow with red decals now.

[Nottage969]

Woooooowww..You boys are dedicated. 10:40pm on a Friday night, i could think of better things to be doing than having brake fluid from asshole to breakfast! Good times

[t.renshaw34]

Was 8 30 pm when i left Karl's. Had work at 9 so was pefect timing. See you Sunday Karl. Works done for another night. I'm off to bed lads.

[seanmau5]

Jesus!! Dedication!! My lines were fucked too, had fuck all pedal & went through 1 liter of brake fluid

[t.renshaw34]

Was a leaking rear right bango bolt. Could be dodgy washers but karl made sure everything was tight, re bleed the lines, Havent had a issue since. haven't done any 100-0 aggressive braking runs yet though. Will report back .

5.1 fluid will be going in when I get my rear braided lines on.

[LiamVJ]

So i drove this thing last night and i know its had a fair bit of work done but shit it goes. then i hopped back in my 2.5i and got depressed. looks like a GT or H6 is what all my moneys going to soon. Thanks Taylor!

[d-chang]

Wow Taylor... I've just spent the last hour reading your threads and all I can say, this is some journey you have been on!!

But I guess the results speak louder than words! The car looks mint, goes like stink... what else could you ask for?!

Good job, looking forward to your future mods mate!

[t.renshaw34]

No Liam... Thankyou for driving my car. I have always woundered what it sounds/looks like from the outside when it's on WOT and when the waste gate opens. Was also good to put my mind back into perspective. What a relatively stock lib (lowered springs, mufflers) handles and drives like compared to a slightly modded one.

I am going off the performance mods for a little bit guys. Everything from here on is big $$$. So I need to do a little saving.
Next big performance mods will be
JDM STI Spec C 6 speed
FMIC
19psi-20psi and E85 on retune.
Looking to hit 250atw with that.

Rebuild and 300 club is a while away.

Have a few little cosmetic mods in mind
K2 gear floor mats
Zero sport engine covers
K2 gear steering wheel

Have also just purchased a new boot as the previous owner before me damaged it quite badly when he attempted his DIY bootlip install. Has been on my to do list since I got the car but never got around to it.

[hamish_023]

Are you still at Uni or working full time now? Good luck with it all, that's a lot of saving to do!

Fmic and outback bonnet ftw

[LiamVJ]

I am going off the performance mods for a little bit guys

BOOOOOOOOO

[Stu]

I am going off the performance mods for a little bit guys

BOOOOOOOOO

No way! it's good to kick the performance bug (drug) for a while and concentrate on other stuff to "round out" the car. +1 taylor