by Dropz » Sun Jun 26, 2011 3:50 pm
I use Castrol Magnatec 10W-30 which is what we use at work in all the 4 cylinders. We use Castrol Edge Sport 5W-30 in turbos and H6 engines. Even after rebuilding my engine I see no issues with the 10W-30 and its what my engine builder, and the guys at work suggested. At my initial 1,000km oil change after the engine rebuild the oil came out relatively clean, and it had only used about 300ml in the run in phase. In the next 3,000km until my logbook service (by time) it used no oil and came out black which was expected now it's run in and done quite a few kms.
Built not bought, it's a way of life.