Member Profile - Bass_Straitener

[<GB>]

Quick question, does revzone use a hub dyno or a roller dyno?

Hub

[dr20t]

Good result Bruce

Seems the vf52 ain't too bad hey

Remind me is this a six speed or auto?

Mick

[Natty]

Congrats Bruce on your results. I hope it's everything you wanted to be. What would the power difference be between a hub dyno and a rolling dyno? I've never had to make the conversion so I'm keen to know.

[<GB>]

Congrats Bruce on your results. I hope it's everything you wanted to be. What would the power difference be between a hub dyno and a rolling dyno? I've never had to make the conversion so I'm keen to know.

we will be finding out in a few weeks when we have the dyno day!

Bruces and my car will be running and they both tuned at rev zone!!

[3rspecb]

Good result Bruce
Seems the vf52 ain't too bad hey
Remind me is this a six speed or auto?
Mick

I can answer this as I had a drive a couple of weeks ago, Its a 6speed manual.

[MH3.0R]

Quick question, does revzone use a hub dyno or a roller dyno?

Hi Jerome,
I am a dyno beginner. Do the different types of dyno's (hub vs roller) make a difference to the results?

[MH3.0R]

Bruce,

That will bring a smile to your dial mate! Need to take me for another ride so I can provide the Before and After critique, n'est pas?

[PoidaGT]

Well done Bruce - looking forward to seeing the Dyno chart!

[3rspecb]

Quick question, does revzone use a hub dyno or a roller dyno?

Hi Jerome,
I am a dyno beginner. Do the different types of dyno's (hub vs roller) make a difference to the results?

Yes, you have pros and cons for each, from memory hub dyno's are a little more fudge proof then roller dyno's but probably best to google and read up. Neither are as accurate as a true engine dyne, but they (hub & roller dyno's) serve a purpose as a tuning tool.

[<GB>]

U don't get any tyre slip or wear so that's a huge bonus for high hp cars

[jaydece]

Had the pleasure of driving this car tonight.....and I must say....what a difference! Not bad for a OEM turbo....very smooth but eager at mid range....especially compared to his last setup

Engine bay looks stock and neatly done.....Great finsh bruce! enjoy her

* driving your car tonight made me realize how much I'm missing out on my car right now *

[bass_straitener]

Had the pleasure of driving this car tonight.....and I must say....what a difference! Not bad for a OEM turbo....very smooth but eager at mid range....especially compared to his last setup

Engine bay looks stock and neatly done.....Great finsh bruce! enjoy her

* driving your car tonight made me realize how much I'm missing out on my car right now *

Good to catch up with the guys, tonight.

Thanks to both Justin and Brian (Brainy) for taking the car for a drive and giving me your honest opinions on how it feels.

Good to know the VF52 can deliver..

[bass_straitener]

Well done Bruce - looking forward to seeing the Dyno chart!

Thanks Pete,

I'll get the charts up tomorrow as I'll need to resize them to post up.

[bass_straitener]

207awkw 380nm on BP Ultimate 98
Boost set at 18psi.
Graphs etc will be up later for review.

I can't be bothered searching , was that your goal or more ?

The goal was to get that queasy feeling when you accelerate. And it's been achieved..

[3rspecb]

Bloody spewing I could't make it tonight.. Glad to year your happy with the result..