Member profile - Dubbwah

Show off what mods you've done to your car.

Re: Member profile - Dubbwah

Postby dubbwah » Mon Oct 31, 2011 12:50 pm

Sorry but the Bottom of the car needs a good clean, just visited a friends farm after heavy rain, that's mud, not rust!
Next mods on the list

Front tower brace sway bar
Exhaust upgrade, undecided on turbo back or diff back

Waiting for 50000 kms to clock over and then buy some 18/19 Rims and tyres
Lowering springs
Front lip spoiler
Last edited by dubbwah on Sat Jul 21, 2012 4:37 pm, edited 1 time in total.
MY10 Liberty GT Wagon
User avatar
dubbwah
 
Posts: 265
Joined: Sun Oct 03, 2010 11:35 am
Location: NSW
Car: MY10 - Liberty GT Wagon

Re: Member profile - Dubbwah

Postby cruisn » Tue Nov 01, 2011 8:31 am

Nice work on the brakes. :good:

I think these wheels are going to look good on then Gen4. :D
User avatar
cruisn
 
Posts: 6560
Joined: Tue Nov 03, 2009 8:09 pm
Location: Melbourne
Car: MY02 GTB E Tune
Real name: Mark

Re: Member profile - Dubbwah

Postby garbo41610 » Tue Nov 01, 2011 8:45 am

I've always thought that the GenV GT wheels would look great on the GenIV. Same as the GenIV GT-B wheels on the GenV would look good too.
Car(s): Steel Silver MY10 GT Wagon + 1985 Subaru Sherpa

Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
User avatar
garbo41610
-stickered-
 
Posts: 1786
Joined: Thu Jun 11, 2009 11:28 am
Location: Emu Heights and Randwick depending on time of day
Car: MY10 GT Wagon Steel Silver
Real name: Phil

Re: Member profile - Dubbwah

Postby dubbwah » Tue Nov 01, 2011 8:07 pm

Thanks Cruisin!
Forum wheel swap time!
MY10 Liberty GT Wagon
User avatar
dubbwah
 
Posts: 265
Joined: Sun Oct 03, 2010 11:35 am
Location: NSW
Car: MY10 - Liberty GT Wagon

Re: Member profile - Dubbwah

Postby Kekotic » Tue Nov 01, 2011 8:21 pm

The Gen4 rims will look too small on a Gen5
User avatar
Kekotic
-stickered-
 
Posts: 6452
Joined: Tue Jun 08, 2010 6:46 pm
Car: MY07 Liberty GT Spec.B
Profile URL: viewtopic.php?f=10&t=13066

Re: Member profile - Dubbwah

Postby garbo41610 » Tue Nov 01, 2011 9:57 pm

I'm talking about the GenIV GT-B 18" wheels.
Car(s): Steel Silver MY10 GT Wagon + 1985 Subaru Sherpa

Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
User avatar
garbo41610
-stickered-
 
Posts: 1786
Joined: Thu Jun 11, 2009 11:28 am
Location: Emu Heights and Randwick depending on time of day
Car: MY10 GT Wagon Steel Silver
Real name: Phil

Re: Member profile - Dubbwah

Postby t.renshaw34 » Tue Nov 01, 2011 10:00 pm

gen 5's need 19" to fill the wheel arch, where the gen 4 only really need 18".

agree on the gen 5 gt wheels on a gen 4. :D
Project Lib - HKS-Killer B-STI-Ultrex-Stanza-Innovate-Perrin-Dynamat-DAMD-K2 Gear-BC-Kartboy-Whiteline-Cusco-Brembo-ROTA-Pirelli-Goodridge-Project MU-DBA-EBC-Garage 88-AVO-Redline-Carbign Craft-Walbro-ID-Kstech-Turbosmart-X Force-Rallitek
User avatar
t.renshaw34
 
Posts: 1630
Joined: Sat Aug 13, 2011 12:14 pm
Location: Adelaide, SA
Car: 2005 Black Lib GT
Real name: Taylor
Profile URL: viewtopic.php?f=10&t=13404

Re: Member profile - Dubbwah

Postby dubbwah » Wed Nov 02, 2011 7:26 am

19's Ftw!
MY10 Liberty GT Wagon
User avatar
dubbwah
 
Posts: 265
Joined: Sun Oct 03, 2010 11:35 am
Location: NSW
Car: MY10 - Liberty GT Wagon

Re: Member profile - Dubbwah

Postby Kekotic » Wed Nov 02, 2011 9:41 am

garbo41610 wrote:I'm talking about the GenIV GT-B 18" wheels.

I know, they would look too small.
User avatar
Kekotic
-stickered-
 
Posts: 6452
Joined: Tue Jun 08, 2010 6:46 pm
Car: MY07 Liberty GT Spec.B
Profile URL: viewtopic.php?f=10&t=13066

Re: Member profile - Dubbwah

Postby dubbwah » Sat Apr 14, 2012 8:07 am

:D
Last edited by dubbwah on Sun Apr 15, 2012 9:21 am, edited 1 time in total.
MY10 Liberty GT Wagon
User avatar
dubbwah
 
Posts: 265
Joined: Sun Oct 03, 2010 11:35 am
Location: NSW
Car: MY10 - Liberty GT Wagon

Re: Member profile - Dubbwah

Postby dubbwah » Sat Apr 14, 2012 8:11 am

Image
MY10 Liberty GT Wagon
User avatar
dubbwah
 
Posts: 265
Joined: Sun Oct 03, 2010 11:35 am
Location: NSW
Car: MY10 - Liberty GT Wagon

Re: Member profile - Dubbwah

Postby dubbwah » Sat Apr 14, 2012 8:13 am

Image
Bonnet Scoop plasti dipped
Last edited by dubbwah on Sun Apr 15, 2012 9:21 am, edited 1 time in total.
MY10 Liberty GT Wagon
User avatar
dubbwah
 
Posts: 265
Joined: Sun Oct 03, 2010 11:35 am
Location: NSW
Car: MY10 - Liberty GT Wagon

Re: Member profile - Dubbwah

Postby cruisn » Sat Apr 14, 2012 3:43 pm

Needs tyre shine STAT! Plus paint the centre caps and get some black nuts. :wink:
User avatar
cruisn
 
Posts: 6560
Joined: Tue Nov 03, 2009 8:09 pm
Location: Melbourne
Car: MY02 GTB E Tune
Real name: Mark

Re: Member profile - Dubbwah

Postby dubbwah » Sat Apr 14, 2012 8:26 pm

Agreed Cruisin, been looking for black subaru center caps, but I thought STI ones at around $135 bucks was a bit steep.
Tyre shine definatley needed. And the wheel nuts could do easily pick up locally on the cheap.
Next day I drove on a 25km rainy dirt road,the color has faded a tad now, maybe in the paint pores.
I'm going to buy some more and re do them along with the Wifes new white Tribeca we are about to order.
Lowering springs could be next, but the car is always loaded with cargo! :)
MY10 Liberty GT Wagon
User avatar
dubbwah
 
Posts: 265
Joined: Sun Oct 03, 2010 11:35 am
Location: NSW
Car: MY10 - Liberty GT Wagon

Re: Member profile - Dubbwah

Postby Stu » Sat Apr 14, 2012 8:34 pm

dubbwah wrote:Agreed Cruisin, been looking for black subaru center caps, but I thought STI ones at around $135 bucks was a bit steep.
Tyre shine definatley needed. And the wheel nuts could do easily pick up locally on the cheap.
Next day I drove on a 25km rainy dirt road,the color has faded a tad now, maybe in the paint pores.
I'm going to buy some more and re do them along with the Wifes new white Tribeca we are about to order.
Lowering springs could be next, but the car is always loaded with cargo! :)

There's plenty of guys on eBay selling for just a few $$ STI carbon stickers to stick onto factory center caps. Looks completely legit and there's a few on here who have done it to their rotas to complete the STI look.
I own a Liberty honest!

2008 Liberty GT tuned by STI #43 obs black sedan - 211Kw atw - WSID 13.136 @ 106mph 1.825 60ft - Wakefield 1:13.518
2005 Liberty 2.5i silver wagon - The daily "Beater" - a bit slower
User avatar
Stu
 
Posts: 459
Joined: Wed Jun 01, 2011 12:16 am
Location: Canberra
Car: 2008 Lib GT STI #43, 2005 Lib 2.5i
Profile URL: viewtopic.php?f=10&t=13003

PreviousNext

Return to Post your mods

Who is online

Users browsing this forum: No registered users and 62 guests