My long awaited plans have finally kicked off, so pumped about getting my Fujitsubo Legalis Super R CAT back exhaust fitted tomorrow at Phat's.
So far:
Performance:
CAI - Phat Gt
Fujitsubo Legalis Super R - Phat GT
Suspension:
Front arm Bushes - Phat GT
Rims:
Rota G-Force 18x8.5 - Pro Speed Racing
Non-performance:
Interior & Exterior HID's - Leo
Black wheel nuts - Phat GT
Ultrex Front Grille
Brakes:
KIDO Racing Big Brake Kit
Front 356x32mm Rotor + 8Pot Caliper
Rear 330x24mm Rotor + 6Pot Caliper
Planned:
- Phat Dump Pipe
- BC BR Coilovers, Tein Flex Coilovers or Phat Edition Tein S Techs -undecided
- Tune
- Guard Rolling if necessary
- Boost Controller
- Gauges
- Black roof decal (undecided!)
- Cyber R Scoop
- ZeroSports Grille
Australian Liberty Owners Club
Member Profile - RUSHN
32 posts
• Page 1 of 3 • 1, 2, 3
Member Profile - RUSHN
by RUSHN » Fri Mar 30, 2012 11:11 pm
Last edited by RUSHN on Sun Apr 15, 2012 12:14 am, edited 1 time in total.
-
RUSHN - formerly RussianSTi
- Posts: 98
- Joined: Sun Feb 27, 2011 11:38 pm
- Location: Gladesville, NSW
- Car: MY06 GT Tuned by STi
- Real name: Danik
Re: Member Profile - RUSHN
by cruisn » Sat Mar 31, 2012 12:16 pm
Nice. 
Id be imagining guard rolling will be needed with those rims. +44?
Id be imagining guard rolling will be needed with those rims. +44?
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Member Profile - RUSHN
by moggy » Sun Apr 01, 2012 9:08 am
The exhaust looks and sounds awesome! 
Bob.
Bob.When I give an opinion you have to ask yourself...what the hell does he know about anything!
I started out with nothing....and I've still got most of it left.....
MY07 Liberty GT spec B 6MT Sedan;
P3 Dump|Fujitsubo Legalis R|Whiteline|Enkeis|HKS EVC|Dixcel|Blitz|Greddy|Pink Bits|Brembos|178.6 kw ATW|
I started out with nothing....and I've still got most of it left.....
MY07 Liberty GT spec B 6MT Sedan;
P3 Dump|Fujitsubo Legalis R|Whiteline|Enkeis|HKS EVC|Dixcel|Blitz|Greddy|Pink Bits|Brembos|178.6 kw ATW|
-
moggy - Posts: 888
- Joined: Tue Jul 24, 2007 5:05 pm
- Location: NW Sydney, NSW
- Car: MY07 Lib GTB 6MT
Re: Member Profile - RUSHN
by HyRax » Mon Apr 02, 2012 3:13 pm
Looking forward to photos!
I rolled mine to fit 18x8.5 +44 Rota Gravels with 225/45/18 rubber. It still rubs slightly on the top side of the tyre under heavy load or hard cornering though, but that may be a spring issue on that side as the other side doesn't rub at all. Might be an excuse for me to get coilovers...
If I were to fit 235 or 245 rubber, I daresay flaring will be needed for it all to fit.
cruisn wrote:Id be imagining guard rolling will be needed with those rims. +44?
I rolled mine to fit 18x8.5 +44 Rota Gravels with 225/45/18 rubber. It still rubs slightly on the top side of the tyre under heavy load or hard cornering though, but that may be a spring issue on that side as the other side doesn't rub at all. Might be an excuse for me to get coilovers...
If I were to fit 235 or 245 rubber, I daresay flaring will be needed for it all to fit.
I was going to procrastinate, but I put it off...
-
HyRax - Posts: 1202
- Joined: Sat Jul 30, 2011 12:25 am
- Location: Sydney
- Car: ADM MY19 3.6R Outback
- Real name: Jeff
- Profile URL: viewtopic.php?f=10&t=15482
- libz05
- Posts: 1262
- Joined: Wed Nov 24, 2010 3:36 pm
- Location: Sydney
- Car: 2005 my06 3.0R-B
- Profile URL: viewtopic.php?f=3&t=15492
-
RUSHN - formerly RussianSTi
- Posts: 98
- Joined: Sun Feb 27, 2011 11:38 pm
- Location: Gladesville, NSW
- Car: MY06 GT Tuned by STi
- Real name: Danik
-
RUSHN - formerly RussianSTi
- Posts: 98
- Joined: Sun Feb 27, 2011 11:38 pm
- Location: Gladesville, NSW
- Car: MY06 GT Tuned by STi
- Real name: Danik
-
RUSHN - formerly RussianSTi
- Posts: 98
- Joined: Sun Feb 27, 2011 11:38 pm
- Location: Gladesville, NSW
- Car: MY06 GT Tuned by STi
- Real name: Danik
-
RUSHN - formerly RussianSTi
- Posts: 98
- Joined: Sun Feb 27, 2011 11:38 pm
- Location: Gladesville, NSW
- Car: MY06 GT Tuned by STi
- Real name: Danik
-
RUSHN - formerly RussianSTi
- Posts: 98
- Joined: Sun Feb 27, 2011 11:38 pm
- Location: Gladesville, NSW
- Car: MY06 GT Tuned by STi
- Real name: Danik
-
RUSHN - formerly RussianSTi
- Posts: 98
- Joined: Sun Feb 27, 2011 11:38 pm
- Location: Gladesville, NSW
- Car: MY06 GT Tuned by STi
- Real name: Danik
-
RUSHN - formerly RussianSTi
- Posts: 98
- Joined: Sun Feb 27, 2011 11:38 pm
- Location: Gladesville, NSW
- Car: MY06 GT Tuned by STi
- Real name: Danik
-
RUSHN - formerly RussianSTi
- Posts: 98
- Joined: Sun Feb 27, 2011 11:38 pm
- Location: Gladesville, NSW
- Car: MY06 GT Tuned by STi
- Real name: Danik
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
-
RUSHN - formerly RussianSTi
- Posts: 98
- Joined: Sun Feb 27, 2011 11:38 pm
- Location: Gladesville, NSW
- Car: MY06 GT Tuned by STi
- Real name: Danik
32 posts
• Page 1 of 3 • 1, 2, 3
Who is online
Users browsing this forum: No registered users and 12 guests