My new liberty with mods :)

[jaydece]

MATE! I know what your farking going through?.....as you've read my journey.....hang in there!

Your car will be a ULTIMATE beast once all the minor fark ups are out of the way....

GOOD LUCK! There's plenty of help / support to be had here

[<GB>]

MATE! I know what your farking going through?.....as you've read my journey.....hang in there!

Your car will be a ULTIMATE beast once all the minor fark ups are out of the way....

GOOD LUCK! There's plenty of help / support to be had here

Thanks bro hopefully u can get yours going good!!


The tuner said it on the last power run they did the car did 275kw atw at 17.7psi
He set the boost to 15 psi to be safe as I don't really want to stuff the turbo

[Gambit]

MATE! I know what your farking going through?.....as you've read my journey.....hang in there!

Your car will be a ULTIMATE beast once all the minor fark ups are out of the way....

GOOD LUCK! There's plenty of help / support to be had here

Thanks bro hopefully u can get yours going good!!


The tuner said it on the last power run they did the car did 275kw atw at 17.7psi
He set the boost to 15 psi to be safe as I don't really want to stuff the turbo

Thats great power for the amount of boost its running!
well done

[<GB>]

MATE! I know what your farking going through?.....as you've read my journey.....hang in there!

Your car will be a ULTIMATE beast once all the minor fark ups are out of the way....

GOOD LUCK! There's plenty of help / support to be had here

Thanks bro hopefully u can get yours going good!!


The tuner said it on the last power run they did the car did 275kw atw at 17.7psi
He set the boost to 15 psi to be safe as I don't really want to stuff the turbo

Thats great power for the amount of boost its running!
well done

Yeah it is aye

[dr20t]

Fark me that's awesome! Especially at such mild boost!

Can't wait to see what it does once the pressure drop is remedied

Could we see the first 300 plus atw gen 4 on here? I hope so!!

Good luck mate

Mick

[Kekotic]

Could we see the first 300 plus atw gen 4 on here? I hope so!!

Why doesn't DeMobBoss count?

[dr20t]

Sorry I wasn't aware anyone on here has cracked 300 club yet.

I know of a few in the build but hadnt seen any officially

Apologies to demoboss?? If they were the first to 300

In any event gb's car will still be awesome once complete.

Mick

[<GB>]

Isn't there many libertys with 300kw atw?

[Kekotic]

I only know of Demobboss who has done it. PHAT might have done it I'm not sure, his car is pretty secretive. Didn't have an engine in it when I went to Sydney almost a year ago though So it was 0kw then.

[<GB>]

That demo boss is a h6 different engine he can have gen 4 h6 I'll go for gen 4 2.5

[Kekotic]

Still a Liberty though, and that's what was asked

[Rome_BRZ]

Pulse dyno doesnt count

[Kekotic]

It's still a damn fast car. Shouldn't be hating on a fellow liberty

[PHAT GT]

i would be checking 4 things and the MRT core would not be one of them as i dont see even there core having this sort of problem with the power you will be at when done

1. check that no rags where left in any piping while being build. (sounds odd but have see this many times before) which will cause the same problem your having

2. check the cat to make sure that its not melted over from all the heat during the tuning process while at MRT or the current tuner

3. make sure the turbo is not out of puf ( i think i read you had a AVO or somthing like that) as these type of turbos are way over rated

4. check that the boost control and other important parts are wired and pluged in correctly

just in case its been over looked

5. you have no leaks after the turbo

6. hope the engine was put together right , i know who done all the machining work on the heads and block so i know thats all right

and if all else fails

6. give me the car for a few day and i guarantee ill get it sorted without fail

[Kekotic]

6. give me the car for a few day and a i guarantee ill get it sorted without fail

That sounds like a plan and a half! Do it Brandon, save yourself the trouble of all the bullshit you are trying to wade through at the moment.