Brembo's and Standard Wheels

Springs, shock absorbers, swaybars,
Brakes, Wheels and Tyres

Brembo's and Standard Wheels

Postby Gambit » Tue Jan 31, 2012 4:21 pm

Yeah I just need to run spacers to drive the car to and from track days myself, so I can mount semis on my weds.
User avatar
Gambit
 
Posts: 1856
Joined: Wed May 19, 2010 7:20 pm
Location: Melbourne
Car: Subaru

Re: Brembo's and Standard Wheels

Postby efracer » Tue Jan 31, 2012 4:28 pm

tangcla wrote:Spacers won't be legal either... so that's not really a sustainable solution.


Apparently the bolt on hubcentric spacers can be engineered if you wanted to. Would never use the floating type, but from all reports hubcentric ones are pretty safe.

cruisn wrote:Spacers suck indeed, but I could live with something that was only 3-5mm max.

Im just going to throw it out there, but the facelift spec B wheels suck. :P


haha...each to their own...I think they look pretty good though!!
efracer
 
Posts: 89
Joined: Mon Jun 21, 2010 2:51 pm
Location: Melbourne
Car: Liberty GT Spec B

Re: Brembo's and Standard Wheels

Postby bosc0 » Wed Feb 01, 2012 6:36 am

I love mine... the spare isn't in the boot, it's in my living room so i get to enjoy it more often.
User avatar
bosc0
 
Posts: 2637
Joined: Thu May 08, 2008 8:22 am
Location: Melbourne
Car: GT SpecB wagon
Real name: Jake

Re: Brembo's and Standard Wheels

Postby cruisn » Wed Feb 01, 2012 2:27 pm

bosc0 wrote:I love mine... the spare isn't in the boot, it's in my living room so i get to enjoy it more often.


IIRC, you use it as a coffee table with a glass top on it correct? :P
User avatar
cruisn
 
Posts: 6560
Joined: Tue Nov 03, 2009 8:09 pm
Location: Melbourne
Car: MY02 GTB E Tune
Real name: Mark

Re: Brembo's and Standard Wheels

Postby efracer » Wed Feb 01, 2012 6:15 pm

Well just checked it out and about 25mm would just do it...so yeah, way too much...not sure what I will do now.

No one would happen to have a spare set of STI rims I could borrow for a day do they??!!
efracer
 
Posts: 89
Joined: Mon Jun 21, 2010 2:51 pm
Location: Melbourne
Car: Liberty GT Spec B

Re: Brembo's and Standard Wheels

Postby cruisn » Wed Feb 01, 2012 7:06 pm

Shit. :shock:

I knew they didnt clear by a bit, but 25mm!!
User avatar
cruisn
 
Posts: 6560
Joined: Tue Nov 03, 2009 8:09 pm
Location: Melbourne
Car: MY02 GTB E Tune
Real name: Mark

Re: Brembo's and Standard Wheels

Postby Penga » Mon Feb 06, 2012 8:31 am

efracer wrote:Well just checked it out and about 25mm would just do it...so yeah, way too much...not sure what I will do now.

No one would happen to have a spare set of STI rims I could borrow for a day do they??!!


trev you should of asked me! i have 2 sets of wheels that can clear brembos! gambit is brrowing a set for the weekend but! if you need them after this weekend let me know!
User avatar
Penga
 
Posts: 519
Joined: Tue Nov 23, 2010 11:02 am
Location: Melbourne
Car: MY07 Liberty GT-B Tuned By STi
Real name: Andrew
Profile URL: viewtopic.php?f=10&t=14458

Re: Brembo's and Standard Wheels

Postby efracer » Mon Feb 06, 2012 10:48 am

Penga wrote:
efracer wrote:Well just checked it out and about 25mm would just do it...so yeah, way too much...not sure what I will do now.

No one would happen to have a spare set of STI rims I could borrow for a day do they??!!


trev you should of asked me! i have 2 sets of wheels that can clear brembos! gambit is brrowing a set for the weekend but! if you need them after this weekend let me know!


haha...ah, oh well. Grabbed a set over the weekend so I am sorted now. Thanks anyways!!
efracer
 
Posts: 89
Joined: Mon Jun 21, 2010 2:51 pm
Location: Melbourne
Car: Liberty GT Spec B

Re: Brembo's and Standard Wheels

Postby mihai » Mon Feb 06, 2012 11:32 pm

efracer wrote:Down at Rye...they had quite a few cops going around finding cars and bringing them back to a station they had setup to do inspections. About 3 inspectors going through the cars that were being brought in.


Was that blitz in rye here?

As I turned onto that road leaving the beach I went past the number plate recognition van and then got pulled into the breatho station. No problems there but then I got told that my car had unpaid fines, news to me. After a quick check it turned out that it was the previous owner.

Surely once a transfer of ownership goes through VicRoads could update their database with unpaid fines etc?
[New: MY11 FPV F6 | Winter White | Pioneer DEX-P99RS | Alpine PDX-F6 | Alpine PDX-M12 | JL Audio 12W7-AE ]
[Old: MY07 2.0R | Urban Grey | 5 MT | 6000k HID | LED | Alpine IVA-W502E | Alpine PDX1.1000 | Alpine PDX4.150 | JL Audio 12W7v3 | Focal KRX2 ]
User avatar
mihai
 
Posts: 1641
Joined: Mon Jun 01, 2009 10:27 pm
Location: Melbourne, VIC
Car: MY07 Liberty 2.0R + MY11 FPV F6
Real name: Michael

Re: Brembo's and Standard Wheels

Postby efracer » Tue Feb 07, 2012 7:43 am

mihai wrote:
efracer wrote:Down at Rye...they had quite a few cops going around finding cars and bringing them back to a station they had setup to do inspections. About 3 inspectors going through the cars that were being brought in.


Was that blitz in rye here?

As I turned onto that road leaving the beach I went past the number plate recognition van and then got pulled into the breatho station. No problems there but then I got told that my car had unpaid fines, news to me. After a quick check it turned out that it was the previous owner.

Surely once a transfer of ownership goes through VicRoads could update their database with unpaid fines etc?


Naa, this was happening along Point Nepean Rd right in the middle of Rye. They blocked off one of the car parks and turned it into a inspection station and had cops running around bringing people back to it. But I did see that breath station you are talking about when I was going to a mates place. But I turned just before it though to go into his street.

Yeah, you would think once transfer of ownership papers go through they would transfer those fines off the car and onto the previous owner or something...
efracer
 
Posts: 89
Joined: Mon Jun 21, 2010 2:51 pm
Location: Melbourne
Car: Liberty GT Spec B

Re: Brembo's and Standard Wheels

Postby smythie » Mon Feb 13, 2012 1:03 pm

mihai wrote:Surely once a transfer of ownership goes through VicRoads could update their database with unpaid fines etc?
You're kidding right? That would involve them actually doing some work!
Flag Bitch

MY06 3.0RB
User avatar
smythie
 
Posts: 5227
Joined: Mon Oct 27, 2008 12:46 pm
Location: Sydney (w-end)
Car: MY06 3RB - Blue

Previous

Return to Suspension, Brakes, Wheels and Tyres.

Who is online

Users browsing this forum: No registered users and 15 guests