rear wagon spring colour code?

Posts specific to the 2.5 litre turbo engine

rear wagon spring colour code?

Postby jp928 » Wed Jan 25, 2012 11:08 am

Does anybody know the correct GTB wagon rear spring colours please?
Just want to verify I have the correct new ones (ebay a while back). Too lazy to jack it up and look at the moment...

thanks
jp 08 gtb 6mt wagon
jp928
 
Posts: 981
Joined: Fri Jan 04, 2008 9:27 am
Location: Melbourne
Car: 08 gtb 6mt wagon

Re: rear wagon spring colour code?

Postby Jim » Sat Feb 04, 2012 5:56 pm

Um, black?
User avatar
Jim
 
Posts: 513
Joined: Tue Nov 02, 2010 9:09 pm
Location: Westmead NSW
Car: MY07 GT-B
Real name: Jim

Re: rear wagon spring colour code?

Postby Kekotic » Sun Feb 05, 2012 12:06 am

Jim wrote:Um, black?

Wrong.

They are Onyx Black! Get it right Jim come on :roll: :lol:
User avatar
Kekotic
-stickered-
 
Posts: 6452
Joined: Tue Jun 08, 2010 6:46 pm
Car: MY07 Liberty GT Spec.B
Profile URL: viewtopic.php?f=10&t=13066

Re: rear wagon spring colour code?

Postby Jim » Sun Feb 05, 2012 11:46 am

Really?

They go to that much effort!??
User avatar
Jim
 
Posts: 513
Joined: Tue Nov 02, 2010 9:09 pm
Location: Westmead NSW
Car: MY07 GT-B
Real name: Jim

Re: rear wagon spring colour code?

Postby jp928 » Sun Feb 05, 2012 4:22 pm

At the risk of beating a dead horse.....most makers have springs painted a solid colour, and signify different ratings with one or two (or even three) dabs or stripes of other colours. The rear units I have , have two dabs on the solid black - one pinkish, one white (IIRC)...This is the info I am seeking to verify...
jp 08 gtb 6mt wagon
jp928
 
Posts: 981
Joined: Fri Jan 04, 2008 9:27 am
Location: Melbourne
Car: 08 gtb 6mt wagon

Re: rear wagon spring colour code?

Postby Jim » Sun Feb 05, 2012 5:50 pm

You wouldnt even have to jack it up to look. Its multi-link rear, get under it with a torch ffs.
User avatar
Jim
 
Posts: 513
Joined: Tue Nov 02, 2010 9:09 pm
Location: Westmead NSW
Car: MY07 GT-B
Real name: Jim

Re: rear wagon spring colour code?

Postby jp928 » Mon Feb 13, 2012 9:18 am

Not so easy just looking underneath...dirty coils, dont know where the dabs are. Jacked it up finally, wiped down the spring - mauve and red dabs, same as new ones...so in they went. Biggest issue was lifting the floor cover between the seet backs and the spare cover - how the (%&^%( do you get the plastic plugs out???
A small issue re-aligning the new shock eye to the hole in the hub, but got both sides done in maybe 1.5 hrs.

Fronts next week. Does anybody know the spec for the nuts for the shock top and the 2 bottom bolts to the hub please? Nothing given in the parts book.

Edit 18/Feb - big bolts are M14x1.5. Top are much smaller, probably M8x1.25, easy to get. Not visible what makes them 'self locking' as described in the WSM - not nylocs that I can see.
jp 08 gtb 6mt wagon.
jp928
 
Posts: 981
Joined: Fri Jan 04, 2008 9:27 am
Location: Melbourne
Car: 08 gtb 6mt wagon


Return to 2.5T engine specific

Who is online

Users browsing this forum: No registered users and 1 guest