walbro fuel pump, finding the O-ring?

[jacks-GTB]

ay guys, so I installed my walbro 255lph the other week..! really not that difficult..if you need help just let us know?
my question is does anyone have some left over o-rings for the fuel pump - ID 8mm, Width - 4mm??

cheers jack

[jacks-GTB]

bump

[jp928]

whats the problem ? If you have the size, search the web for it. Bunnings, Repco, Bursons etc will all have boxes of O ring assortments.
These people can do O-rings starting at 0.2mm ID x 0.2 section and up to wherever..
http://www.smallparts.com.au/store/part ... ng/wide/1/

jp 08 gtb 6mt wagon

[lunchboxsti]

Whats the model number for the pump?

Is that the one that bolts straight in without having to modify?

[jacks-GTB]

Whats the model number for the pump?

Is that the one that bolts straight in without having to modify?

No it's the one that I had to modify, It's all good...fixing the prob..

[jacks-GTB]

whats the problem ? If you have the size, search the web for it. Bunnings, Repco, Bursons etc will all have boxes of O ring assortments.
These people can do O-rings starting at 0.2mm ID x 0.2 section and up to wherever..
http://www.smallparts.com.au/store/part ... ng/wide/1/

jp 08 gtb 6mt wagon

Thank you..help is always awesome

[gordy]

IIRC you need to make sure any o-rings are impervious rubber if they are going to touch fuel. SBC bearings sell these, not sure if they are nationwide.