CEL after spark plug change?

Posts specific to the 2.5 litre turbo engine

CEL after spark plug change?

Postby Jim » Sun Nov 27, 2011 12:05 pm

Hi dudes,

Just changed out the sparkplugs and changed my oil + filter. The car chucked the shits and threw a CEL when i turned the car back on?

I had to remove the batterey during the process, is this the likely reason for it having a fit? Once i stopped and started the car a few times it went away, went for a drive and the car felt smooth and crisp and it didnt show up the CEL again.

ECU whining about batterey removal?
User avatar
Jim
 
Posts: 513
Joined: Tue Nov 02, 2010 9:09 pm
Location: Westmead NSW
Car: MY07 GT-B
Real name: Jim

Re: CEL after spark plug change?

Postby Dropz » Mon Nov 28, 2011 9:46 pm

Did you unplug the AFM on the drivers side? possibly was not reconnected properly at first. the battery won't throw a code, but its possible it had a bad connection and the charging rate was too low or too high for a second.
Built not bought, it's a way of life.
User avatar
Dropz
 
Posts: 1710
Joined: Tue Apr 26, 2011 9:50 pm
Location: Adelaide
Real name: Karl
Profile URL: viewtopic.php?f=10&t=17921

Re: CEL after spark plug change?

Postby Jim » Mon Nov 28, 2011 9:56 pm

Probably something like that, been driving 2 whole days with no more hassles.

Although i kinda feel like low down as gotten a bit doughy since the spark plug change. Felt somewhat smoother in higher RPM ?
User avatar
Jim
 
Posts: 513
Joined: Tue Nov 02, 2010 9:09 pm
Location: Westmead NSW
Car: MY07 GT-B
Real name: Jim

Re: CEL after spark plug change?

Postby Kekotic » Mon Nov 28, 2011 10:01 pm

Try an ECU reset?
User avatar
Kekotic
-stickered-
 
Posts: 6452
Joined: Tue Jun 08, 2010 6:46 pm
Car: MY07 Liberty GT Spec.B
Profile URL: viewtopic.php?f=10&t=13066

Re: CEL after spark plug change?

Postby Dropz » Tue Nov 29, 2011 6:02 am

Igniting quicker at high rpm from the clean plugs.
Built not bought, it's a way of life.
User avatar
Dropz
 
Posts: 1710
Joined: Tue Apr 26, 2011 9:50 pm
Location: Adelaide
Real name: Karl
Profile URL: viewtopic.php?f=10&t=17921

Re: CEL after spark plug change?

Postby Jim » Tue Nov 29, 2011 6:03 pm

Cool bananas.

Just did the ECU reset, so ill see how it runs in the morning.

Without a tune, will the ECU "learn" the modifications itself and adjust to suit or does it adjust itself in defence of the mods?
User avatar
Jim
 
Posts: 513
Joined: Tue Nov 02, 2010 9:09 pm
Location: Westmead NSW
Car: MY07 GT-B
Real name: Jim

Re: CEL after spark plug change?

Postby Kekotic » Tue Nov 29, 2011 6:35 pm

It will run rich to compensate for extra airflow if you have any intake/exhaust mods.
User avatar
Kekotic
-stickered-
 
Posts: 6452
Joined: Tue Jun 08, 2010 6:46 pm
Car: MY07 Liberty GT Spec.B
Profile URL: viewtopic.php?f=10&t=13066

Re: CEL after spark plug change?

Postby Dropz » Tue Nov 29, 2011 6:36 pm

It will still have the tune, just would have forgotten whatever it's learnt since the tune.
Built not bought, it's a way of life.
User avatar
Dropz
 
Posts: 1710
Joined: Tue Apr 26, 2011 9:50 pm
Location: Adelaide
Real name: Karl
Profile URL: viewtopic.php?f=10&t=17921

Re: CEL after spark plug change?

Postby Jim » Tue Nov 29, 2011 6:59 pm

As far as i know, the ECU is untouched, however the previous owner told me he paid lots for a ECUwreck tune back in 07 when he bought it.

Didnt have any mods. He then told me on his last service during ownership Subaru wiped it off the ECU. Very unsure about it, but why would you lie about getting a tune then say someone wiped it off? You wouldnt mention the wiping of it at all!
User avatar
Jim
 
Posts: 513
Joined: Tue Nov 02, 2010 9:09 pm
Location: Westmead NSW
Car: MY07 GT-B
Real name: Jim


Return to 2.5T engine specific

Who is online

Users browsing this forum: No registered users and 37 guests