I'm about to upgrade the stock swaybars on my MY08 2.5i to something better, but to satisfy my curiosity I'd like to find out how big the stock swaybars are. Googling around I can only find info about Gen3 Liberty swaybars being 17mm, but the Gen4 stockers look thicker than that.
Anyone know what the 2.5i Gen4 stock sizes are? TIA.
Australian Liberty Owners Club
Stock swaybar sizes
2 posts
• Page 1 of 1
Stock swaybar sizes
by HyRax » Thu Nov 03, 2011 7:28 pm
I was going to procrastinate, but I put it off...
-
HyRax - Posts: 1202
- Joined: Sat Jul 30, 2011 12:25 am
- Location: Sydney
- Car: ADM MY19 3.6R Outback
- Real name: Jeff
- Profile URL: viewtopic.php?f=10&t=15482
Re: Stock swaybar sizes
by HyRax » Sun Nov 13, 2011 8:52 pm
To answer my own question, I finally got under the car with a tape measure and found the diameter of the factory swaybars by their circumference.
Rear is 17mm and front is 20mm.
Rear is 17mm and front is 20mm.
I was going to procrastinate, but I put it off...
-
HyRax - Posts: 1202
- Joined: Sat Jul 30, 2011 12:25 am
- Location: Sydney
- Car: ADM MY19 3.6R Outback
- Real name: Jeff
- Profile URL: viewtopic.php?f=10&t=15482
2 posts
• Page 1 of 1
Return to Suspension, Brakes, Wheels and Tyres.
Who is online
Users browsing this forum: No registered users and 2 guests