Horsepower Factory or AVO?

Posts specific to the 2.5 litre turbo engine

Horsepower Factory or AVO?

Postby sti323 » Sat Oct 15, 2011 10:02 am

Looking at getting my 07 Liberty GT tuned and was wondering who out of AVO and HP-Factory would be the better to use?

Thanks in advance
sti323
 
Posts: 8
Joined: Tue Oct 11, 2011 7:19 pm

Re: Horsepower Factory or AVO?

Postby Nalnoc » Sat Oct 15, 2011 2:25 pm

This post should probably be in the "Tuning" section - viewforum.php?f=56

You should also consider Chasers in West Melbourne. They did a great job with my lib, friendly and knowledgeable staff, can't recommend them enough. http://chasers.com.au/
User avatar
Nalnoc
 
Posts: 98
Joined: Mon Aug 30, 2010 1:42 pm
Location: Melbourne
Car: EJ257'd MY05 GT
Real name: Brad

Re: Horsepower Factory or AVO?

Postby sti323 » Sat Oct 15, 2011 2:32 pm

Thanks for the feedback :D
sti323
 
Posts: 8
Joined: Tue Oct 11, 2011 7:19 pm

Re: Horsepower Factory or AVO?

Postby icnfly » Sat Oct 15, 2011 10:50 pm

neither, call Ray @ ART in heidelberg, 9459 0880, tell him Zac with the silver liberty sent u, great bloke and quality advice / service.
User avatar
icnfly
 
Posts: 166
Joined: Wed Feb 23, 2011 1:52 am
Location: Melbourne
Car: MY 07 Liberty GT Spec B Sedan 6sp
Real name: Zac

Re: Horsepower Factory or AVO?

Postby tangcla » Sat Oct 15, 2011 10:53 pm

icnfly wrote:neither, call Ray @ ART in heidelberg, 9459 0880, tell him Zac with the silver liberty sent u, great bloke and quality advice / service.

You might get better discount if you tell him that Clarence sent you :tongue:

Ray is where I go, and I have no hesitation recommending him. It's an hour trip to him and I still go there.
www.tangcla.com - photography

Canon 5D Mark III x2 | 16-35mm f/2.8L | 24-70mm f/2.8L IS | 70-200mm f/2.8L IS
100mm f/2.8L IS macro | 200mm f/2.0L IS | 580EX-II x2 | 430EX-II | PocketWizard TT1/TT5
User avatar
tangcla
 
Posts: 7409
Joined: Wed Aug 15, 2007 1:47 pm
Location: Melbourne, VIC
Car: B6 Audi S4 (4.2L V8)
Real name: Clarence
Profile URL: http://www.tangcla.com

Re: Horsepower Factory or AVO?

Postby sti323 » Sun Oct 16, 2011 7:07 am

Thanks. I'm open to who ever can o the best job in the tune SAFELY :)
sti323
 
Posts: 8
Joined: Tue Oct 11, 2011 7:19 pm

Re: Horsepower Factory or AVO?

Postby coyote » Sun Oct 16, 2011 9:34 am

Nalnoc wrote:This post should probably be in the "Tuning" section


I'd suggest all these questions about who should do this and who should do that all belong in the General subforums.

Real technical discussions on this site are few and far between and just diluted by non-technical discussions that belong in General.
Image

** Team Tony **
User avatar
coyote
 
Posts: 2207
Joined: Mon Jul 30, 2007 2:33 pm
Location: brisbane.qld.au

Re: Horsepower Factory or AVO?

Postby Drew » Sat Oct 22, 2011 8:08 am

I'd take it to Vinnie at VCM... get a V-Tune ;)
Driving: 2007 Liberty 2.5i Wagon with no mods (yet - gasp!)
User avatar
Drew
 
Posts: 138
Joined: Tue May 19, 2009 10:19 pm
Location: Melbourne
Car: 2007 Liberty 2.5i Wagon
Real name: Andrew

Re: Horsepower Factory or AVO?

Postby icnfly » Sat Oct 22, 2011 3:39 pm

tangcla wrote:
icnfly wrote:neither, call Ray @ ART in heidelberg, 9459 0880, tell him Zac with the silver liberty sent u, great bloke and quality advice / service.

You might get better discount if you tell him that Clarence sent you :tongue:

Ray is where I go, and I have no hesitation recommending him. It's an hour trip to him and I still go there.


that's so true! lol, Ray will safely tune ur car 2 it's potential, he'll work out what the limit is and then go from there and tune it safely, also, he won't 'lock' ur computer as other tuners do, meaning u don't always have 2 take it back 2 the same tuner, it's called 'open source' tuning
User avatar
icnfly
 
Posts: 166
Joined: Wed Feb 23, 2011 1:52 am
Location: Melbourne
Car: MY 07 Liberty GT Spec B Sedan 6sp
Real name: Zac

Re: Horsepower Factory or AVO?

Postby sti323 » Sat Nov 05, 2011 3:12 pm

DONE!

Tuned by Ray! Super nice guy too :D
sti323
 
Posts: 8
Joined: Tue Oct 11, 2011 7:19 pm


Return to 2.5T engine specific

Who is online

Users browsing this forum: No registered users and 2 guests