I'm planing on lowering my liberty soon to 100mm off the ground and I want some
pics of people who are running at the same height so I can see what it looks like.
Any and all pics would be great Stance is Everything
jakey wrote:.... goshgollywingwong
Jack_Keaka wrote:the process of chris getting his parts as follows:
AB501UT!0N wrote:I'm planing on lowering my liberty soon to 100mm off the ground and I want some
pics of people who are running at the same height so I can see what it looks like.
Any and all pics would be great Stance is Everything
hamish_023 wrote:I disagree there's a point where it just looks stupid. Perfect stance for me on most cars is just flush with the wheel arch
hamish_023 wrote:I disagree there's a point where it just looks stupid. Perfect stance for me on most cars is just flush with the wheel arch
senator wrote:Don’t forget if you’re after the right stance your wheel/tyre size and offset choice will make a big difference.
jakey wrote:.... goshgollywingwong
Jack_Keaka wrote:the process of chris getting his parts as follows:
sheppo9 wrote:Get a set of BC BR's (which are the same as Pedder's sell, but they put a sticker on them) for $1300 from Just Jap.
Put them in yourself.
Go for a drive, re-adjust the height on all the corners so they are the same and re-adjust the dampening to what you want.
Get the car aligned.
I just saved you $800 or so.
jakey wrote:.... goshgollywingwong
Jack_Keaka wrote:the process of chris getting his parts as follows:
jakey wrote:.... goshgollywingwong
Jack_Keaka wrote:the process of chris getting his parts as follows:
jakey wrote:.... goshgollywingwong
Jack_Keaka wrote:the process of chris getting his parts as follows:
Return to Suspension, Brakes, Wheels and Tyres.
Users browsing this forum: No registered users and 5 guests