jp928 wrote:Egg,
All depends on your current system as to ease of upgrade. You can get 2-din dashes for both single and dual zone AC controls around $400. Then you can mount any HU you fancy. If you go single din HU, you will need a pocket to fill the remaining hole.
If you have a Mcintoss amp, you will need a speaker lead to go from HU to speaker plug under Pax seat for speaker outs - this is what I have done. If you get a HU with line outs, you can connect these to the Mcintoss amp - a different cable needed here, fairly specialized - see Svxdc posts here for contact, he can make them mostly. If you dont have a Mcintoss now, you should be able to connecta new HU to your std speaker wiring with an Aerpro adapter, available from Autobarn, Supercheap etc - I did this in my 04 Outback.
FWIW, as I have said before, with my Mcintoss amp removed, using a JVC DV6105 HU, I do not miss the amp, and have not felt the need to change speakers at all.
jp 08 gtb 6mt wagon.
Thanks for that. I plan on keeping the car so I will prob replace everything once and thats it. So I can have complete control over my Iphone/ipod. Will also change
Headunit- Single Din ( Alpine)
Front speakers with Splits - poss adding bass driver as well will look into it.
Rear Doors( might see if better putting bass drivers or basic speakers or swap the front speakers to the back door for fillout)
Rear Sub replacement for Wagon
And Amp.
budget around 3 and 3 1/2g's..
With the headunit I was trying to find out if they actually mnake the replacemrnt unit for a single head unit not double din. Either way its not a massive prob.
this is my second head unit in the car, shortly after purchasing the car a cd got suck and wouldnt eject.After it got rteplaced I have been too scared to use it so I only use my ipod.