Hi all,
I had a RCA lead I was going to use in the Sherpa to hook up the rear channels, but I have absolutely no idea where on earth it has gone. I just need a cheapy (but obviously still of some quality)about 2m long and looking to spend around $20 or so delivered. If anyone has one laying around let me know.
Cheers,
Phil
Australian Liberty Owners Club
WTB: Car Audio RCA cable
11 posts
• Page 1 of 1
WTB: Car Audio RCA cable
by garbo41610 » Sun Jun 05, 2011 7:47 pm
Car(s): Steel Silver MY10 GT Wagon + 1985 Subaru Sherpa
Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
-
garbo41610 - -stickered-
- Posts: 1786
- Joined: Thu Jun 11, 2009 11:28 am
- Location: Emu Heights and Randwick depending on time of day
- Car: MY10 GT Wagon Steel Silver
- Real name: Phil
Re: WTB: Car Audio RCA cable
by teflon » Sun Jun 05, 2011 11:06 pm
Are these just standard RCA cables you want garbo? L&R (red and white ones you get from DVD players etc???). I have heaps of RCA cables from various home theatre equipment gear I've bought in the past. If this is what you're after then I can send you a couple free of charge.
-
teflon - Posts: 374
- Joined: Sun Aug 24, 2008 8:17 pm
- Location: SA
- Car: 2004 MY05 Pearl White Liberty GT
- Real name: Phan
Re: WTB: Car Audio RCA cable
by Robbks » Mon Jun 06, 2011 8:43 am
i have a couple of them,
either stinger or jaycay, i forget which ones i have left.
i know one is 5metres, not sure on the other will have a look
either stinger or jaycay, i forget which ones i have left.
i know one is 5metres, not sure on the other will have a look
coyote wrote:Sure, a GTR is fast ... but it's about as interesting as listening to grass grow.
-
Robbks - Posts: 2185
- Joined: Wed Jan 05, 2011 8:21 am
- Location: Hobart, Tas
- Car: MY06 3.0RB Wagon
- Real name: Rob
- Profile URL: viewtopic.php?f=10&t=12350
Re: WTB: Car Audio RCA cable
by garbo41610 » Mon Jun 06, 2011 2:03 pm
Cheers mate. 5m is hella long, the Sherpa is only about 3.5metres long at most LOL.
Thanks dude, I am looking for car audio orientated RCA's, they have more shielding and better outside sheathing.
Are these just standard RCA cables you want garbo? L&R (red and white ones you get from DVD players etc???). I have heaps of RCA cables from various home theatre equipment gear I've bought in the past. If this is what you're after then I can send you a couple free of charge.
Thanks dude, I am looking for car audio orientated RCA's, they have more shielding and better outside sheathing.
Car(s): Steel Silver MY10 GT Wagon + 1985 Subaru Sherpa
Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
-
garbo41610 - -stickered-
- Posts: 1786
- Joined: Thu Jun 11, 2009 11:28 am
- Location: Emu Heights and Randwick depending on time of day
- Car: MY10 GT Wagon Steel Silver
- Real name: Phil
Re: WTB: Car Audio RCA cable
by teflon » Mon Jun 06, 2011 2:16 pm
I can post a photo of a couple of higher end RCA cables I used for my home theatre system before I changed everything to hdmi. Quite thick and heavily shielded (not the cheapies you get with the dvd players)... just have to check what length they are... might not quite be 2metres...
-
teflon - Posts: 374
- Joined: Sun Aug 24, 2008 8:17 pm
- Location: SA
- Car: 2004 MY05 Pearl White Liberty GT
- Real name: Phan
Re: WTB: Car Audio RCA cable
by mihai » Mon Jun 06, 2011 3:53 pm
Do you need a fuse holder by any chance? I have a Stinger HPM SHD201 that I don't need and looking to sell. (Retails for $120AUD).
http://www.darvex.com/store/pc/Stinger-HPM-Water-Resistant-ANL-Fuse-Holder-28p347.htm
http://www.darvex.com/store/pc/Stinger-HPM-Water-Resistant-ANL-Fuse-Holder-28p347.htm
[New: MY11 FPV F6 | Winter White | Pioneer DEX-P99RS | Alpine PDX-F6 | Alpine PDX-M12 | JL Audio 12W7-AE ]
[Old: MY07 2.0R | Urban Grey | 5 MT | 6000k HID | LED | Alpine IVA-W502E | Alpine PDX1.1000 | Alpine PDX4.150 | JL Audio 12W7v3 | Focal KRX2 ]
[Old: MY07 2.0R | Urban Grey | 5 MT | 6000k HID | LED | Alpine IVA-W502E | Alpine PDX1.1000 | Alpine PDX4.150 | JL Audio 12W7v3 | Focal KRX2 ]
-
mihai - Posts: 1641
- Joined: Mon Jun 01, 2009 10:27 pm
- Location: Melbourne, VIC
- Car: MY07 Liberty 2.0R + MY11 FPV F6
- Real name: Michael
Re: WTB: Car Audio RCA cable
by teflon » Wed Jun 08, 2011 8:22 pm
Sorry garbo, my good quality well shielded RCA cables are only about half a metre long.
-
teflon - Posts: 374
- Joined: Sun Aug 24, 2008 8:17 pm
- Location: SA
- Car: 2004 MY05 Pearl White Liberty GT
- Real name: Phan
Re: WTB: Car Audio RCA cable
by garbo41610 » Wed Jun 08, 2011 8:31 pm
No worries. Thanks mate.
All good on fuse holder thanks mihai
All good on fuse holder thanks mihai
Car(s): Steel Silver MY10 GT Wagon + 1985 Subaru Sherpa
Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
-
garbo41610 - -stickered-
- Posts: 1786
- Joined: Thu Jun 11, 2009 11:28 am
- Location: Emu Heights and Randwick depending on time of day
- Car: MY10 GT Wagon Steel Silver
- Real name: Phil
Re: WTB: Car Audio RCA cable
by mihai » Wed Jun 08, 2011 8:34 pm
garbo41610 wrote:No worries. Thanks mate.
All good on fuse holder thanks mihai
No worries Phil.
[New: MY11 FPV F6 | Winter White | Pioneer DEX-P99RS | Alpine PDX-F6 | Alpine PDX-M12 | JL Audio 12W7-AE ]
[Old: MY07 2.0R | Urban Grey | 5 MT | 6000k HID | LED | Alpine IVA-W502E | Alpine PDX1.1000 | Alpine PDX4.150 | JL Audio 12W7v3 | Focal KRX2 ]
[Old: MY07 2.0R | Urban Grey | 5 MT | 6000k HID | LED | Alpine IVA-W502E | Alpine PDX1.1000 | Alpine PDX4.150 | JL Audio 12W7v3 | Focal KRX2 ]
-
mihai - Posts: 1641
- Joined: Mon Jun 01, 2009 10:27 pm
- Location: Melbourne, VIC
- Car: MY07 Liberty 2.0R + MY11 FPV F6
- Real name: Michael
Re: WTB: Car Audio RCA cable
by jp928 » Thu Jun 09, 2011 2:30 pm
Must be able to buy rca leads almost anywhere - Dick Smith, Jaycar, probably coles, woolies,Autobarn, supercheap......Any TV shop...
jp 08 gtb 6mt wagon.
jp 08 gtb 6mt wagon.
- jp928
- Posts: 981
- Joined: Fri Jan 04, 2008 9:27 am
- Location: Melbourne
- Car: 08 gtb 6mt wagon
Re: WTB: Car Audio RCA cable - CLOSED
by garbo41610 » Tue Jun 14, 2011 6:23 pm
Cheers y'all... Have decided to just use the 4channel bridged at the moment.
Car(s): Steel Silver MY10 GT Wagon + 1985 Subaru Sherpa
Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
-
garbo41610 - -stickered-
- Posts: 1786
- Joined: Thu Jun 11, 2009 11:28 am
- Location: Emu Heights and Randwick depending on time of day
- Car: MY10 GT Wagon Steel Silver
- Real name: Phil
11 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests