RAPTOR SUPERCHARGER FOR LIB 3.0

[MH3.0R]

Cannot imagine the time taken to take it back to stock. The manifold looks interesting? Was it a custom build or part of a kit?

[3rspecb]

Its a K2 gear supercharger kit, from memory price is/was $11k or $13k just to buy the kit..

[Tradewind]

The system in that image may well be the only one ever produced - at that kind of money you don't get many buyers willing to lay big money on a 3.0 engine

On the other hand you can sell hundreds of $13k kits for an LS2 6.0 Holden easily........ It just one of those things

[3rspecb]

Well it’s been a 1000kms since the install/tune of the Raptor H6 Supercharger Kit and am a happy customer (Raptor & HPF).
Have to admit for most of the journey I have had the radio off so I can hear the s/c whine. The s/c whine has reduced but still audible which I like just fine

Car is very good to drive, HPF played with the AVCs & DBW and along with the Raptor s/c, this has made the car much more easier/pleasing to drive

Overall for me, the best thing this s/c kit has given me is due to the extra power/torque throughout the whole rev range, I don't have to thrash the arse off it all the time, part throttle gets me to the appropriate speed quicker/easier then when N/A. When I do decide to give it some stick, it brings a smile to my face

Waiting patiently for the intercooler kit so we can push it further.

On a side note, at a certain rev range, I have an annoying high pitch sound when I back off and or very light pedal application, we think it’s a faulty/leaky BOV as Stephen’s kit did not do this, but as it’s not affecting driving/performance am waiting for Raptor to come back from overseas to rectify/root cause.

[MH3.0R]

G,

It brought a smile to my face too.

[Tradewind]

G

Thanks for update

So far I know a car or 2 from Brisbane will join the ranks once I get back

[3rspecb]

G
Thanks for update
So far I know a car or 2 from Brisbane will join the ranks once I get back

Awesome.

By the way, according to Rom Raider software dyno, my car is making 235kwatw in 3rd gear

[teK--]

G
Thanks for update
So far I know a car or 2 from Brisbane will join the ranks once I get back

Awesome.

By the way, according to Rom Raider software dyno, my car is making 235kwatw in 3rd gear

Sure that's not in HP?

[3rspecb]

[Sure that's not in HP?

LOL, you should of seen the torque figure

[Robbks]

got 400m of flat, straight road near you?

[3rspecb]

actually "yes". I also have Calder park dragway not far away from me and they run open nights.

Once intercooled, re tuned and clutch replaced will definately go down and see if she can improve on the factory 1/4 mile time

[Robbks]

Nah, just go and do it now. so you have a before IC and after IC installation reference.
you don't need to drive it hard off the line to get the same trap speed. and the trap speed will give you your HP

[MH3.0R]

Nah, just go and do it now. so you have a before IC and after IC installation reference.
you don't need to drive it hard off the line to get the same trap speed. and the trap speed will give you your HP

+1for Rob. Do it G - And can I come and watch?

[Tradewind]

The ROM raider Dyno - you can probably compare that data with data from I Wish or from XRT Dyno charts in this or his threads

What is the factory quartermile time and speed on average?

[west_minist]

Have your tuner send me a 3rd gear pull from low rpm like 1500+ till redline at WOT. Only need vehicle speed and RPM.

Also need size of tyres, vehicle weight and occupants weight.

I am very sorry we did not complete full AVCS tuning up to 6000rpm to see what the full potential would be.