Seatbelt status indicator lights repair

Ask for help with doing something on your car here.

Seatbelt status indicator lights repair

Postby Dangrant » Thu May 26, 2011 10:59 pm

Hi can anyone tell me how to replace globes up in the seatbelt indicator lights on the roof near the sunroof controls? Mine aren't lighting up. Think it's hlobes or something. Any suggestions
Dangrant
 
Posts: 8
Joined: Sat May 21, 2011 7:41 pm
Car: 3.0 myo5 liberty

Re: Seatbelt status indicator lights repair

Postby mihai » Thu May 26, 2011 11:05 pm

Dangrant wrote:Hi can anyone tell me how to replace globes up in the seatbelt indicator lights on the roof near the sunroof controls? Mine aren't lighting up. Think it's hlobes or something. Any suggestions


Are you sure that the globes are out? Is the front passenger seat indicator RED when there is someone sitting there? If it is, then you most likely have a fault somewhere else. Does the chime beep if there is a passenger in the passenger seat with no seatbelt (and no light)? If yes, the LED's or globes may be out.
[New: MY11 FPV F6 | Winter White | Pioneer DEX-P99RS | Alpine PDX-F6 | Alpine PDX-M12 | JL Audio 12W7-AE ]
[Old: MY07 2.0R | Urban Grey | 5 MT | 6000k HID | LED | Alpine IVA-W502E | Alpine PDX1.1000 | Alpine PDX4.150 | JL Audio 12W7v3 | Focal KRX2 ]
User avatar
mihai
 
Posts: 1641
Joined: Mon Jun 01, 2009 10:27 pm
Location: Melbourne, VIC
Car: MY07 Liberty 2.0R + MY11 FPV F6
Real name: Michael

Re: Seatbelt status indicator lights repair

Postby smythie » Fri May 27, 2011 10:12 am

Just to clarify mihai's last question, the chime will only sound when the vehicle is moving (eg more than 5km/h). It won't chime at standstill
Flag Bitch

MY06 3.0RB
User avatar
smythie
 
Posts: 5227
Joined: Mon Oct 27, 2008 12:46 pm
Location: Sydney (w-end)
Car: MY06 3RB - Blue

Re: Seatbelt status indicator lights repair

Postby Dangrant » Sat May 28, 2011 10:55 pm

Yeh the chime beeps (have to get rid of that) and all four lights don't work if seatbelt is connected I have tested them all
Dangrant
 
Posts: 8
Joined: Sat May 21, 2011 7:41 pm
Car: 3.0 myo5 liberty

Re: Seatbelt status indicator lights repair

Postby mihai » Sun May 29, 2011 7:12 am

If its all 4 not working, I'd be looking for a loose connector on that unit. Do your map lights work? Not sure if they are on the same loom as the seatbelt lights, but who knows. Chances of all 4 globes/LED's not working due to individual faults is unlikely.
[New: MY11 FPV F6 | Winter White | Pioneer DEX-P99RS | Alpine PDX-F6 | Alpine PDX-M12 | JL Audio 12W7-AE ]
[Old: MY07 2.0R | Urban Grey | 5 MT | 6000k HID | LED | Alpine IVA-W502E | Alpine PDX1.1000 | Alpine PDX4.150 | JL Audio 12W7v3 | Focal KRX2 ]
User avatar
mihai
 
Posts: 1641
Joined: Mon Jun 01, 2009 10:27 pm
Location: Melbourne, VIC
Car: MY07 Liberty 2.0R + MY11 FPV F6
Real name: Michael

Re: Seatbelt status indicator lights repair

Postby EVL20T » Mon Apr 20, 2015 12:43 pm

Reviving and old thread, I own a 07 GT Spec b, I thought I had a problem also as my passenger warning light wasn't lighting up, removed the roof lights and tested the leds and they are working fine, then I checked under my seat and the passenger seat belt wiring isn't plugged into anything nor can I find a plug for it to be plugged into
EVL20T
 
Posts: 47
Joined: Tue Mar 31, 2015 12:59 am
Location: Newcastle, NSW
Car: Liberty
Real name: Mikey


Return to How do I?

Who is online

Users browsing this forum: No registered users and 7 guests