3M Carbon Fibre Wrap

Body kits, seat covers, fluffy dice, and other non-performance mods.

3M Carbon Fibre Wrap

Postby Devour » Wed Apr 27, 2011 9:02 pm

Hey Guys,

i know many of you have mixed feelings of carbon fibre and whether its on the interior or exterior. But i was helping out a mate with his subaru weathershields and i ended up snapping his weathershield. He said instead of replacing it, we can just wrap it but you have to pay for the wrap. So after that was done, i was left with a lot of leftover wrap. I was considering selling it...but at the Easter Cruise, Jim aka tek gave me some ideas on using some of it.

Here is where i used some of the leftover wrap on the car. I did some parts on the car where i initially wanted to paint black, instead wrapping it in cf

Apologies for any poor quality photos as they were taken quickly.

Hope you like the black/cf on urban grey look!


Opinions welcome, cheers guys!
Attachments
DSC03608r.JPG
CF Wrapped Interior Silver Bits
DSC03608r.JPG (244.76 KiB) Viewed 4492 times
DSC03607r.JPG
CF Wrapped Left Taillight
DSC03607r.JPG (210.94 KiB) Viewed 4492 times
DSC03605r.JPG
CF Wrapped Left Taillight
DSC03605r.JPG (217.13 KiB) Viewed 4492 times
DSC03598r.JPG
CF Wrapped Side Mirror Left
DSC03598r.JPG (216.04 KiB) Viewed 4492 times
DSC03596r.JPG
CF Wrapped Side Mirror Right
DSC03596r.JPG (191.72 KiB) Viewed 4492 times
DSC03603r.JPG
CF Wrapped Front Grill
DSC03603r.JPG (190.97 KiB) Viewed 4492 times
Last edited by Devour on Wed Apr 27, 2011 9:08 pm, edited 1 time in total.
User avatar
Devour
 
Posts: 145
Joined: Mon Aug 30, 2010 8:35 pm
Location: Melbourne, Victoria
Car: R34 GTR V-Spec / MY07 2.5i
Real name: Aaron

Re: 3M Carbon Fibre Wrap

Postby teK-- » Wed Apr 27, 2011 9:04 pm

Holy crap you had a lot "left over" ;)

Lookin good Aaron, I like the console and grill, but not too sure about the strip under the lights!
MY04 2.5i Safety 5MT Sedan "Project Locomotive"
..: JDM Subaru-AVO-Whiteline-Bilstein-Swift Springs-Cusco-Rallitek-GT Brakes-Remsa-K4RT30Y-Blitz-Philips-Défi-STI-Sabelt-Redline-Alpine-Polk Audio-Kenwood-Dynamat :..
User avatar
teK--
-stickered-
 
Posts: 4064
Joined: Thu Jun 11, 2009 5:02 pm
Location: Melbourne

Re: 3M Carbon Fibre Wrap

Postby Kekotic » Wed Apr 27, 2011 9:10 pm

teK-- wrote:not too sure about the strip under the lights!


Agreed.
User avatar
Kekotic
-stickered-
 
Posts: 6452
Joined: Tue Jun 08, 2010 6:46 pm
Car: MY07 Liberty GT Spec.B
Profile URL: viewtopic.php?f=10&t=13066

Re: 3M Carbon Fibre Wrap

Postby jacobraftery » Wed Apr 27, 2011 11:10 pm

Thoroughly like it mate, Suprsingly like the dash as well. Must admit I cringed when I saw the title, but Kudos.
Image
jacobraftery
 
Posts: 96
Joined: Tue Nov 03, 2009 7:09 pm
Location: Greenbank, Queensland
Car: Subaru Liberty RX 2.5L MY03. Gen 3
Real name: Jacob / Jake

Re: 3M Carbon Fibre Wrap

Postby rickerty » Thu Apr 28, 2011 9:49 am

Looks great Aaron. Are you gonna attempt the door handle surrounds? I was considering doing this (I have quite a bit of leftover also)
but I'm not as motivated as you lol.
The grille looks nice, I've seen Jim's but never seen the post-face done, I like it!
Good job :D
[MY08/Lib/ej25/5MT/Limited Ed./SatNav/TeamWagon!]
HKS | MOMO | HID/LED | BILSTEIN
User avatar
rickerty
-stickered-
 
Posts: 394
Joined: Mon Sep 13, 2010 7:32 pm
Location: Melbourne, South East
Car: MY08/LTD/EJ25/5MT/WAGON
Real name: Rick

Re: 3M Carbon Fibre Wrap

Postby sooobi » Thu Apr 28, 2011 10:20 am

Looks sweeet!

Any pointers on the grill install? Where are the joins and are they visible at all? Was it hard to do?

Cheers!!
Gen1, Gen2, Gen3, Gen4.. No mods, honest...
User avatar
sooobi
 
Posts: 558
Joined: Tue Dec 18, 2007 11:45 am
Location: Sunny Queensland
Car: my05mt GT b.spec no neons
Real name: The Stig
Profile URL: http://forum.liberty.asn.au

Re: 3M Carbon Fibre Wrap

Postby jdm rsk » Thu Apr 28, 2011 11:14 am

looks great except for under the rear lights
User avatar
jdm rsk
formerly legacy rsk
 
Posts: 4026
Joined: Sat Oct 07, 2006 10:04 am
Location: Sydney, Australia, Kasuga City Fukuoka Japan
Car: MY 11 VW Golf GTI ED35
Real name: Shane

Re: 3M Carbon Fibre Wrap

Postby champ » Thu Apr 28, 2011 12:00 pm

I like it too, but like the rest... not quite the tail lights. Will need to bug you for pointers one day :lol:
User avatar
champ
-stickered-
 
Posts: 1303
Joined: Sun Aug 01, 2010 9:49 pm
Location: Joondalup, WA
Car: MY07 GT Spec.B Tuned by STi 6MT OBP
Real name: Ian

Re: 3M Carbon Fibre Wrap

Postby jdm rsk » Thu Apr 28, 2011 12:47 pm

User avatar
jdm rsk
formerly legacy rsk
 
Posts: 4026
Joined: Sat Oct 07, 2006 10:04 am
Location: Sydney, Australia, Kasuga City Fukuoka Japan
Car: MY 11 VW Golf GTI ED35
Real name: Shane

Re: 3M Carbon Fibre Wrap

Postby Devour » Thu Apr 28, 2011 4:00 pm

Hey Guys,

Cheers for the opinions. Drove the car around today. Agreed that the tail light strip doesnt work as well as i had planned. Nevertheless, easy to take off.


rickerty wrote:Looks great Aaron. Are you gonna attempt the door handle surrounds? I was considering doing this (I have quite a bit of leftover also)
but I'm not as motivated as you lol.
The grille looks nice, I've seen Jim's but never seen the post-face done, I like it!
Good job :D


Rick, nah mate havent even thought of the door handle surrounds. Im sure its easy as the mirrors and grill were probably the hardest bits to cf wrap. I might actually give it a go haha.

Yeah the grill i think looks nice on a post facelift, a good alternative to painting it black, and if you want it chrome again...just strip it off!

sooobi wrote:Looks sweeet!

Any pointers on the grill install? Where are the joins and are they visible at all? Was it hard to do?

Cheers!!


Hey soobi, the grill install is quite simple. All you do is detach the grill from the car. When you take it off the car and you turn it upside down, the screws and hinges are visible from the other end. Making it easy to detach both the single chrome wing and the chrome surround off. Allowing you to take it with you to clean, prep and wrap and you can wrap it behind so when you reattach it, its hidden so the finish is clean. Simply put it back and done!

jdm rsk wrote:looks great except for under the rear lights


Cheers Shane, taken the tail light strip off as i agree also. Made the car look like it has eyeliner haha. Guess it doesnt work on a non dark colour.

champ wrote:I like it too, but like the rest... not quite the tail lights. Will need to bug you for pointers one day :lol:


Haha, i asked tek for pointers and all you need is a heatgun, if you dont have one a hairdryer is suffice and go away at it with a scalpel or stanley knife depending on how fine you want your results to be.

Once again, thanks for all the comments guys.
User avatar
Devour
 
Posts: 145
Joined: Mon Aug 30, 2010 8:35 pm
Location: Melbourne, Victoria
Car: R34 GTR V-Spec / MY07 2.5i
Real name: Aaron

Re: 3M Carbon Fibre Wrap

Postby imania » Thu Apr 28, 2011 4:49 pm

the grille looks awesome mate :)
User avatar
imania
 
Posts: 613
Joined: Fri Nov 05, 2010 1:23 pm
Location: Melbourne
Car: 2007 Liberty GT Tuned by STi
Real name: Ain

Re: 3M Carbon Fibre Wrap

Postby sjm69 » Thu Apr 28, 2011 4:51 pm

imania wrote:the grille looks awesome mate :)


+1 grille looks great ,nice job
User avatar
sjm69
-stickered-
 
Posts: 788
Joined: Mon Jan 03, 2011 4:16 pm
Location: Sydney
Car: MY08 Premium Wagon
Real name: Steve

Re: 3M Carbon Fibre Wrap

Postby swingn » Thu Apr 28, 2011 5:01 pm

How much did you buy to have that much left over!? :P

I love my CF & if you ask me what you've done looks great to me... Except I'm going to have to agree with Shano about the bits under the rear lights. BUT, if you did more CF bits on the rear or maybe tinted your tail lights I could change my mind :P
User avatar
swingn
-stickered-
 
Posts: 4163
Joined: Wed Feb 20, 2008 1:11 pm
Location: Sydney, NSW
Car: MX5 SE / 911 Turbo
Real name: Matt
Profile URL: www.rtdc.com.au

Re: 3M Carbon Fibre Wrap

Postby Devour » Thu Apr 28, 2011 5:29 pm

swingn wrote:How much did you buy to have that much left over!? :P

I love my CF & if you ask me what you've done looks great to me... Except I'm going to have to agree with Shano about the bits under the rear lights. BUT, if you did more CF bits on the rear or maybe tinted your tail lights I could change my mind :P


Hrm i cant remember. It was lengthwise for the weather shields complete wrap so no overlapping or half cutting. So im actually left with quite a lot. Dimensions im not sure as he bought it all.

I agree swingn. I have an ultrex rear cf diffuser however, its a different shade and a wet look cf compared to the dry 3m one and one seems grey and the other is black so yeah. So i gave it a try but It looks funny with it on, two different types of CF so i took it off. Tail light tints i was thinking of, but i was afraid it might turn out like the under the taillight strip. So yeah.

Here is a photo i took with the other ones from yesterday, before i decided to cf wrap the tail light strip to show you the contrast of the cf on the ultrex rear diffuser as opposed to the pics above of the dry black look cf wrap from 3M.


Also i still need more practice, if you take a closer look at the grill there are a few imperfections as i wasnt experienced with the wrap. The mirrors i have to redo as the edges are cut dodgy so ill have to take the mirrors off completely and have them on a bench to do it properly. Despite the imperfections on the grill, most of you wouldnt have noticed anyway so im lazy to redo that. haha.

Took a look at the door handles.....doesnt look promising and the shape is a bit difficult and precise cutting is required, probably have to pop the door open but ill probably leave it as it might turn out like the tail light strip and it would be difficult to put it on and then a pain to take off..
Attachments
DSC03604r.JPG
Ultrex CF Diffuser
DSC03604r.JPG (216.75 KiB) Viewed 4378 times
User avatar
Devour
 
Posts: 145
Joined: Mon Aug 30, 2010 8:35 pm
Location: Melbourne, Victoria
Car: R34 GTR V-Spec / MY07 2.5i
Real name: Aaron

Re: 3M Carbon Fibre Wrap

Postby champ » Fri Apr 29, 2011 2:39 pm

jdm rsk wrote:Have a look here: http://carbonfibrevinylwrap.net.au/


Thanks Shane. Did you get your's done with these guys? IIRC, I think you did it yourself and got the stuff off ebay... but it was a while ago I read that, so cannot remember accurately.
User avatar
champ
-stickered-
 
Posts: 1303
Joined: Sun Aug 01, 2010 9:49 pm
Location: Joondalup, WA
Car: MY07 GT Spec.B Tuned by STi 6MT OBP
Real name: Ian

Next

Return to Cosmetics

Who is online

Users browsing this forum: No registered users and 9 guests