RAPTOR SUPERCHARGER FOR LIB 3.0

[west_minist]

No. Don't expect any diff.

[Tradewind]

I havent checked - has the starter of this thread still been with us?? Certainly started a highly active topic

[MH3.0R]

This ia starting to look like a nice mod! Now that Ed is involved, I will be taking a little more notice of the results

[Tradewind]

A bit of Trivia

Also very recently I supercharged my Toyota Hilux V6 4.0 - auto trans - 2006 model

THe water to air intercooled kit was thrown on the vehicle in a few hrs and given a quick road tune.

The boost was 3.8psi - the power gain was 93hp, 24.4 hp per psi

I am betting the H6 will offer a nice gain for 6 - 7psi as the cylinder heads should be at least as efficient as the 1GRFE Hilux engine.

The intercooler at low boost allows the use of almost stock timing values which really pumps up response, torque and fuel economy with the air flow increase

[Lib 3.0LR]

A bit of Trivia

Also very recently I supercharged my Toyota Hilux V6 4.0 - auto trans - 2006 model

THe water to air intercooled kit was thrown on the vehicle in a few hrs and given a quick road tune.

The boost was 3.8psi - the power gain was 93hp, 24.4 hp per psi

I am betting the H6 will offer a nice gain for 6 - 7psi as the cylinder heads should be at least as efficient as the 1GRFE Hilux engine.

The intercooler at low boost allows the use of almost stock timing values which really pumps up response, torque and fuel economy with the air flow increase

Your killing me Tim I just dont have the money to do it

[Tradewind]

You are the lucky one!

The SC kit is $5k and a bit and you are running ........ Me I've got to get a Lib H6 yet so I have to find $25k +. Now that's a big ask anytime lol

[Lib 3.0LR]

You are the lucky one!

The SC kit is $5k and a bit and you are running ........ Me I've got to get a Lib H6 yet so I have to find $25k +. Now that's a big ask anytime lol

Well looks like I'am going to spend more time at work

[Tradewind]

Something like this would suit me

http://www.carsales.com.au/all-cars/pri ... 20matchany

Would actually prefer an 07 but ...... a bit out of my price range

[Lib 3.0LR]

Something like this would suit me

http://www.carsales.com.au/all-cars/pri ... 20matchany

Would actually prefer an 07 but ...... a bit out of my price range

Here you go try this one ...viewtopic.php?f=3&t=12045
http://www.carsales.com.au/used-cars/pr ... D=10185559
Cheaper with low km's

[Tradewind]

That could suit me fine ......

I may stretch a bit further and get a vehicle with the factory GPS if possible

I will be in the market for one around August - Sept all being normal

I just love this flat 6 - must be the smoothest running engine I have ever had the pleasure to work with

[Robbks]

Needs more wagon..!

[Tradewind]

All customers have recieved their H6 3.0 supercharger kits today

Its over to the crowd now!!

[Tradewind]

Double post, see below for correct version

[Tradewind]

Call for assistance

I have been alerted to the fact that the power steering hoses on PRE facelift H6 engines may be different to POST facelift vehicles


Could anyone post up some pics of their power steering lines on a PRE facelift 3.0

The Raptor kit was templated,designed to fit a POST facelift H6 as it currently stands. It may or may not need modification for PRE facelift vehicles to accomodate changes with the PS lines.

I know Subaru did this on their 4 cyl cars as well, early models had metal lines directly off the PS pump whereas later models are all flexible Hydraulic lines, in those instances I have bracket designs to suit both of them.

[Statts]

Best I could do with the iPhone.



Hope that helps