Subaru upper cylinder cleaner

by **icnfly** » Wed Mar 02, 2011 11:06 pm

haha, too good! we got 20 cans so far, but we'll have a final figure by next week, we'll make friday 11th march the deadline, so ric can organise the space needed in the car if we get more orders 4 cans, thanks nick! and ric!

by **tangcla** » Thu Mar 03, 2011 8:06 am

I'm interested in two or three myself.

by **blacktop™** » Thu Mar 03, 2011 8:21 am

[ITS-STI] wrote:
Ric wrote:I'm driving up to Sydney over the Labour day weekend, and planning to meet up with Arith and some of the other Sydney guys. I can bring a box back to Melbourne if that helps.

Oooh oooh! Can i come? I haven't been on a liberty cruise since the RSLC days... Want to organise one whils we are here? I will be offering cans for friendship haha!

I wasn't invited either

lol I guess they don't want us to come cos they haven't made an official event.

How much are you charging per can nick?

by **Ric** » Thu Mar 03, 2011 8:25 am

blacktop™ wrote:...
I wasn't invited either lol I guess they don't want us to come cos they haven't made an official event.
...

No-one has yet, it's just been a few messages swapped between me and Jim so far.
He's going to start a topic in the "Gatherings" forum today, probably for a dinner get together on the Sat night. All welcome

by **blacktop™** » Thu Mar 03, 2011 8:31 am

Yipee! What Saturday is that going to be?

Never mind about the price nick, I saw the price in your for sale thread ($7.50)

by **Kekotic** » Thu Mar 03, 2011 8:38 am

How long does it take to drive to Sydney.....
I might be interested in driving up, considering Mark is trying to get a Melb cruise going that weekend, maybe some of us could drive up to Sydney instead?

by **Ric** » Thu Mar 03, 2011 8:56 am

blacktop™ wrote:Yipee! What Saturday is that going to be?
...

Sat week. March-12

chaotic2050 wrote:How long does it take to drive to Sydney.....

8-9 hours, depending where you start and finish.
We're heading off about 4pm on the Friday, and driving halfway (either Holbrook or Gundagai), then the rest on Sat morning.

by **Kekotic** » Thu Mar 03, 2011 11:39 am

I'm certainly interested Ric, as I could hopefully get PHAT to install a DP for me. Assuming he has the time to knock one up before next Sat/Sun.

I'll give him a call and let you know tomorrow, if you don't mind me tagging along for the drive.

by **icnfly** » Thu Mar 03, 2011 5:20 pm

I been 2 syd up and back from mill park and only takes me 7.5 hours! most recent time was 2 weeks ago when I drove my liberty back from gold coast, doin about 130 km/s p/h average speed after seymour cos they got those point 2 point speed cameras up until then, but after seymour no cameras till u get deep into NSW! but watch out for cops with radars, if u leaving fri arvo there'll b heaps of em out!

by **THERB3** » Fri Mar 04, 2011 4:04 am

Hey guys,

Can someone give me an insight about this Upper Cylinder Cleaner.
What I want to know is it suited for all our liberties ?
How to do it, where to spray and a step by step walkthrough.
Some off us are not mechanically minded like myself. :lol:

There have been a few threads on this but still not clear.

by **overl0ad** » Fri Mar 04, 2011 7:23 am

THERB3 wrote:Hey guys,

Can someone give me an insight about this Upper Cylinder Cleaner.
What I want to know is it suited for all our liberties ?
How to do it, where to spray and a step by step walkthrough.
Some off us are not mechanically minded like myself.

There have been a few threads on this but still not clear.

don't stress, just grab a couple of cans and i'm sure there's someone who lives close enough to you to be able to help you with this.

by **jaydece** » Fri Mar 04, 2011 9:40 am

THERB3 wrote:Hey guys,

Can someone give me an insight about this Upper Cylinder Cleaner.
What I want to know is it suited for all our liberties ?
How to do it, where to spray and a step by step walkthrough.
Some off us are not mechanically minded like myself.

There have been a few threads on this but still not clear.

I agree ....excuse my noobness....but I myself is kinda unclear on how this actually works / improves / cleans ?

by **Kekotic** » Fri Mar 04, 2011 11:37 am

I think it cleans off the carbon deposits to give a smoother idle and other stuff.
I'm about as clueless as you, but I know you have to pour it in a different spot on Turbo models compared to NA.

by **THERB3** » Fri Mar 04, 2011 12:33 pm

Does anyone have a walk through how to do this on a 3.0RB NA engine ?

If its easy enough I will purchase a few them.......

by **3rspecb** » Fri Mar 04, 2011 5:52 pm

Can you put me down for 12 cans please?

Hi Ric, do you have the room to bring these back..

Subaru upper cylinder cleaner

Re: Subaru upper cylinder cleaner

Re: Subaru upper cylinder cleaner

Re: Subaru upper cylinder cleaner

Re: Subaru upper cylinder cleaner

Re: Subaru upper cylinder cleaner

Re: Subaru upper cylinder cleaner

Re: Subaru upper cylinder cleaner

Re: Subaru upper cylinder cleaner

Re: Subaru upper cylinder cleaner

Re: Subaru upper cylinder cleaner

Re: Subaru upper cylinder cleaner

Re: Subaru upper cylinder cleaner

Re: Subaru upper cylinder cleaner

Re: Subaru upper cylinder cleaner

Re: Subaru upper cylinder cleaner

Who is online