New member Canberra

Introduce yourself

Re: New member Canberra

Postby matt_3.0rb » Wed Feb 16, 2011 3:47 pm

Hey mate, hows the car??

Had the springs fitted yet??
Image
matt_3.0rb
-stickered-
 
Posts: 472
Joined: Sun Oct 03, 2010 2:36 pm
Location: Hobart, Tasmania
Car: '05 3.0R-b wagon 6MT
Real name: Matt

Re: New member Canberra

Postby chopster » Thu Feb 17, 2011 7:44 am

matt_3.0rb wrote:Hey mate, hows the car??

Had the springs fitted yet??

Hey Matt. It's going great, nice to drive.

Springs haven't arrived yet. I'll be sure to post up pics once they are installed.
User avatar
chopster
 
Posts: 36
Joined: Sat Jan 15, 2011 7:35 pm
Location: Canberra
Car: MY06 3.0R-B wagon
Real name: Andy

Re: New member Canberra

Postby chopster » Sun Feb 20, 2011 9:17 pm

I fitted the Tein S Techs this weekend. Thanks to PHAT for supplying them! :good:

Stock ride height.
Image
Tein S Techs.
Image
Front.
Image
Rear.
Image

I'm happy with the drop in height and the reduction in body roll. Car is flatter through the corners. Ride quality is firmer but not uncomfortable. There was plenty of knocking coming from the front at first which was VERY unexpected. Rears seem to be okay. I've done about 150km since and it's gotten better but hasn't completely disappeared. Short, sharp bumps are the worst; especially mid corner.
Unfortunately I snapped a strut bolt trying to diagnose/fix the issue. :angry2: So now I'm after a replacement tophat for a Bilstein! I doubt I can purchase just the tophat by itself (hope I'm wrong) so I'm prepared to buy a whole shock if necessary. If anybody has one they don't want I'll gladly take it off your hands. :D
User avatar
chopster
 
Posts: 36
Joined: Sat Jan 15, 2011 7:35 pm
Location: Canberra
Car: MY06 3.0R-B wagon
Real name: Andy

Previous

Return to Introductions

Who is online

Users browsing this forum: No registered users and 3 guests