2004 Liberty GT - IACV location

Posts specific to the 2.0 litre Turbo engine

2004 Liberty GT - IACV location

Postby petraspcs » Sat Oct 23, 2010 10:23 pm

My 2004 Liberty GT is reving extremely hign during cold starts. This seems to occur intermitently.
Also - fuel economy is getting worse and iding is getting worse.
Have seen many illustrations about cleaning the IACV.

I have removed the air box / hoses / intercooler.

I cannot locate the IACV??

Does any one know where it is located on the 2.0T? Will cleaning the IACV make a difference?

CHEERS
petraspcs
 
Posts: 1
Joined: Sat Oct 23, 2010 10:18 pm
Car: 2004 GT Wagon

Re: 2004 Liberty GT - IACV location

Postby Murch » Tue Oct 26, 2010 6:28 pm

what is a IACV?
Murch
 
Posts: 45
Joined: Mon Mar 23, 2009 5:44 pm
Location: Altona North, Melbourne

Re: 2004 Liberty GT - IACV location

Postby smythie » Tue Oct 26, 2010 8:21 pm

idle air control valve.
Flag Bitch

MY06 3.0RB
User avatar
smythie
 
Posts: 5227
Joined: Mon Oct 27, 2008 12:46 pm
Location: Sydney (w-end)
Car: MY06 3RB - Blue

Re: 2004 Liberty GT - IACV location

Postby bert_ » Tue Oct 26, 2010 9:44 pm

im pretty sure it would be near the throttle body, or on top of it? ill take a look 2morrow and get back to you.
User avatar
bert_
 
Posts: 520
Joined: Thu Oct 07, 2010 2:42 pm
Location: Sydney South-West
Car: 04' WRX STi
Real name: Robert

Re: 2004 Liberty GT - IACV location

Postby smythie » Wed Oct 27, 2010 5:43 pm

OK, I've just spent an hour or so searching through a couple of different workshop manuals (JDM/AUDM and USDM) and can't find any reference to an IACV. I'd be surprised if these cars had IACV's anyway. They are used to assist idle control on engines where the ECU has no control on the throttle butteflies (by bypassing the butterflies to reduce vacuum in the intake manifold and thus make it a bit easier for the engine to turn). With DBW throttle bodies the ECU can do that by just opening the throttle bodies - it doesn't need a bypass valve.
Flag Bitch

MY06 3.0RB
User avatar
smythie
 
Posts: 5227
Joined: Mon Oct 27, 2008 12:46 pm
Location: Sydney (w-end)
Car: MY06 3RB - Blue

Re: 2004 Liberty GT - IACV location

Postby bert_ » Sat Oct 30, 2010 3:06 pm

you might be right, i couldnt find one when i looked around. im still fairly new to these boxer engines so dont know much about them either.
User avatar
bert_
 
Posts: 520
Joined: Thu Oct 07, 2010 2:42 pm
Location: Sydney South-West
Car: 04' WRX STi
Real name: Robert

Re: 2004 Liberty GT - IACV location

Postby PHAT GT » Sat Oct 30, 2010 5:33 pm

bert_ wrote:you might be right, i couldnt find one when i looked around. im still fairly new to these boxer engines so dont know much about them either.




your liberty does not have an idle control motor so you can stop looking

you can has other problems


what state are you in ???


Michael
Image

WINNERS DONT DO DIFFERENT THINGS , THEY JUST DO THINGS DIFFERENT
User avatar
PHAT GT
 
Posts: 1250
Joined: Sat Oct 07, 2006 10:44 pm
Location: Sydney


Return to 2.0T engine specific

Who is online

Users browsing this forum: No registered users and 6 guests