Will 2.0T parts fit 2.5T

[Mosti]

Hey everyone

My brother owns an 07 TB STi Liberty and wants to know if a AVO TMIC and AVO cat-back exhaust off a 06 TB STi Liberty will fit his car?

[hamish_023]

To my knowledge it won't bolt on due to difference in top mounts.

http://img837.imageshack.us/i/32251000.jpg/
http://img841.imageshack.us/i/89001137.jpg/

The exhaust would be the same from the cat back. Dumps are different but the rest is same. Anyone confirm this?

[Arith]

To my knowledge it won't bolt on due to difference in top mounts. The exhaust would be the same from the cat back. Dumps are different but the rest is same. Anyone confirm this?

+1

Top mount won't fit but the catback will.

[Mosti]

cheers guys
Also, will an AVO silicon intake from the 2.0L fit the 2.5L??

My brother has bought a bunch of after market parts from a 2.0L TB STi owner ans will be selling the stuff that wont fit his 07 TB STi on here.
That i know of he has an AVO TMIC, AVO silicon intake, AVO pod filter and adapter, Boost gauge(unsure of brand yet) electronic boost controller(unsure of brand yet) and a few other things.

[swingn]

TMIC = No

All others should fit alright.

[fatfrog02]

cheers guys
Also, will an AVO silicon intake from the 2.0L fit the 2.5L??

My brother has bought a bunch of after market parts from a 2.0L TB STi owner ans will be selling the stuff that wont fit his 07 TB STi on here.
That i know of he has an AVO TMIC, AVO silicon intake, AVO pod filter and adapter, Boost gauge(unsure of brand yet) electronic boost controller(unsure of brand yet) and a few other things.

Silicon intake from 2.0L will fit a 2.5L, but some of the breather nozzles are in different locations and you will have to cut your engine cover to make it fit. There is one line that goes to the crank breather case that you may have issues with as it is the main one in a totally different location. I would personally not do it, it will look a bit sh1t to be honest.