New Rear Lip Spoiler Install

[Kekotic]

It's from ebay.
And I was the one who bought it, so he picked it up from me

Here is the thread
viewtopic.php?f=45&t=8845&hilit=ebay+spoiler

And here is the ebay listing
http://cgi.ebay.com/ebaymotors/ws/eBayI ... MEWAX%3AIT

[Jimmy S]

Hey mate just wondering where you picked that rear lip up from. Would it of been from ultrex?

http://www.ultrex.com.au/subaru-liberty ... p-306.html


Cheers.

The Ultrex one is slightly different... can see how it looks from the back in these shots of mine(in CF though)...

[Kekotic]

I think considerably different is a better way to describe it.

Ultrex one doesn't have the LED brake light!

[tangcla]

... hard as a rock too, no way it's gunna budge.

That's what she said!

[SiLeNcA]

HAHAHA i like the extra brake light but yea got mine from Kieran on the forum per his previous posts Havernt had any issues with it so far and as long as you get a good spray its a good deal i think

[Kekotic]

[Rem]

[vp920b]

Is this lip spoiler from ebay?

Wow, looks good mate.

Might get one.

[upilbau]

hi mate, just wondering how did u install that lip? did u only use double sided tape or u need to drill it??
im thinking to get one from ultrex.. cheers
http://www.ultrex.com.au/subaru-liberty ... p-307.html

[mihai]

hi mate, just wondering how did u install that lip? did u only use double sided tape or u need to drill it??
im thinking to get one from ultrex.. cheers
http://www.ultrex.com.au/subaru-liberty ... p-307.html

The ultrex one is just double sided tape. No drilling required. However the finish isnt 100%.

Very ripply when seen in person, just ask eckymosis. Also the lip actually extends past the end of the boot on the left and right sides and goes down the quarter panel a little bit (maybe 10-15cm?). Eckymosis got his panel beater to cut the spoiler and sand the edges for a nice finish.

If you are gonna spend $350 on an ultrex, you may as well wait out and get one of these: http://forum.liberty.asn.au/viewtopic.php?f=3&t=15685

Appears to be better finish and cheaper. Only downside is it requires drilling into your boot but its not that bad as I've done it on my car. Just measure twice and drill once, slowly and carefully.

[upilbau]

The ultrex one is just double sided tape. No drilling required. However the finish isnt 100%.

Very ripply when seen in person, just ask eckymosis. Also the lip actually extends past the end of the boot on the left and right sides and goes down the quarter panel a little bit (maybe 10-15cm?). Eckymosis got his panel beater to cut the spoiler and sand the edges for a nice finish.

If you are gonna spend $350 on an ultrex, you may as well wait out and get one of these: http://forum.liberty.asn.au/viewtopic.php?f=3&t=15685

Appears to be better finish and cheaper. Only downside is it requires drilling into your boot but its not that bad as I've done it on my car. Just measure twice and drill once, slowly and carefully.

thx for the reply.. thats very informative

[jacks-GTB]

hi mate, just wondering how did u install that lip? did u only use double sided tape or u need to drill it??
im thinking to get one from ultrex.. cheers
http://www.ultrex.com.au/subaru-liberty ... p-307.html

The ultrex one is just double sided tape. No drilling required. However the finish isnt 100%.

Very ripply when seen in person, just ask eckymosis. Also the lip actually extends past the end of the boot on the left and right sides and goes down the quarter panel a little bit (maybe 10-15cm?). Eckymosis got his panel beater to cut the spoiler and sand the edges for a nice finish.

If you are gonna spend $350 on an ultrex, you may as well wait out and get one of these: http://forum.liberty.asn.au/viewtopic.php?f=3&t=15685

Appears to be better finish and cheaper. Only downside is it requires drilling into your boot but its not that bad as I've done it on my car. Just measure twice and drill once, slowly and carefully.

thanks Michael...for the advertising also comes with drilling template