Gen4 lowering springs. H&R or Kings?

[GorGasm]

Thats the ones. Cost me $500NZD second hand off a fresh import.

They are a bit busy in town but work brilliantly at speed on the back roads. Much more compliant than I was expecting.

They are only spring/damp adjustable but I don't really need anything else once theyre setup correctly.

Will get some pics up once I get a working camera again. $3000 wheels or $1000 camera... decisions decisions.

[lozza]

Can somebody help me with Tein S Tech question?

Would a set of Tein S Tech springs which are currently on a LibGT with non Bilstein shocks fit onto my LibSTI with Bilsteins?

Or do I need a set of Phat Special Tein springs?

cheers

Laurie

[smythie]

Yes, No, Yes

[Arith]

Yes, No, Yes

LOL!

Yes, they will fit, but ride height will be another issue. Because the springs were specially design for either Bilsteins or non-Bilsteins, you'll get odd height differences when fitting one set to another. Front and rear will sit unevenly and ride will be a bit off.

Try to get the S.Tech's designed for Bilsteins if you can for your car. Surely the Phat-spec springs can't be that much more expensive than the 2nd hand ones you're looking at?

[lozza]

cheers guys. are the S Tech Phat specials still $455 delivered?

[Arith]

are the S Tech Phat specials still $455 delivered?

Unfortunately prices tend to fluctuate according to the exchange rate, but it doesn't hurt to send Phat an email asking what price he can land them for you.

[NZGT]

Hi everyone, first time post so please forgive me if this has been covered before. What are these special Spec B Tein springs the PHAT can get? The Tein's I've seen lower the rear nice but the front points to the sky

[NZGT]

Any?

[bambi]

Phat specials: http://forum.liberty.asn.au/viewtopic.php?f=38&t=5095

[mihai]

Phat specials: http://forum.liberty.asn.au/viewtopic.php?f=38&t=5095

The phat specials are good...as long as you run them on the Billies. If you are running on the KYB shocks, aparently the ride is VERY hard! I have H&R on my stock KYB shocks and although the ride is slightly harder than before, i havnt really noticed much of a drop in the front. Going by stock measurements, the front has dropped 5mm and the rear 15mm.