Sorry guys Stanza CF Bulge Scoop he is from the US
Company he is on ebay or order through the net. Name is HKC-Speed
Australian Liberty Owners Club
WTB air duct for a GT bonnet
52 posts
• Page 2 of 4 • 1, 2, 3, 4
Re: WTB air duct for a GT bonnet
by THERB3 » Tue Jun 29, 2010 1:40 pm
MY05 Subaru Liberty Wagon 3.0RB Silver 6MT
Modifications:
19" Rays/Volk GT30 Wheels :: Hi Tech Mufflers :: HKS Panel Filter :: STi Front Lip :: 6000K HID Driving/Fog Lights :: LED Parkers/Licence/Map/Dome :: Brembo Package :: V-Tune :: Tein Flex Coilovers & EDFC Controller :: HKC Carbon Bonnet Scoop :: Hanabi Smoked LED Rear Tail Lights :: Eyelids :: Goodridge Braided Lines :: JDM Front Bar :: Corazon Grille :: Pioneer AVH-X8650BT / Alpine PDX5 Amp
Current Plans:Whiteline SwayBars ::
Modifications:
19" Rays/Volk GT30 Wheels :: Hi Tech Mufflers :: HKS Panel Filter :: STi Front Lip :: 6000K HID Driving/Fog Lights :: LED Parkers/Licence/Map/Dome :: Brembo Package :: V-Tune :: Tein Flex Coilovers & EDFC Controller :: HKC Carbon Bonnet Scoop :: Hanabi Smoked LED Rear Tail Lights :: Eyelids :: Goodridge Braided Lines :: JDM Front Bar :: Corazon Grille :: Pioneer AVH-X8650BT / Alpine PDX5 Amp
Current Plans:Whiteline SwayBars ::
-
THERB3 - -stickered-
- Posts: 1522
- Joined: Sun Jun 08, 2008 8:05 am
- Location: Melbourne
- Car: MY05 Subaru Liberty 3.0RB Wagon
- Real name: Hazza
Re: WTB air duct for a GT bonnet
by Kevlar GT » Tue Jun 29, 2010 2:59 pm
THERB3 wrote:Sorry guys Stanza CF Bulge Scoop he is from the US
Company he is on ebay or order through the net. Name is HKC-Speed
I've dealth with him (Jimmy?) before and had great customer service.
-
Kevlar GT - Posts: 1707
- Joined: Mon Jan 14, 2008 2:48 pm
- Location: Canberra (Southside of town)
- Car: 04 GT Wagon
Re: WTB air duct for a GT bonnet
by THERB3 » Tue Jun 29, 2010 3:10 pm
Did you get one of his scoops ?
What did you purschase off him. I must say communication is fine but his postage is very excessive.
What did you purschase off him. I must say communication is fine but his postage is very excessive.
MY05 Subaru Liberty Wagon 3.0RB Silver 6MT
Modifications:
19" Rays/Volk GT30 Wheels :: Hi Tech Mufflers :: HKS Panel Filter :: STi Front Lip :: 6000K HID Driving/Fog Lights :: LED Parkers/Licence/Map/Dome :: Brembo Package :: V-Tune :: Tein Flex Coilovers & EDFC Controller :: HKC Carbon Bonnet Scoop :: Hanabi Smoked LED Rear Tail Lights :: Eyelids :: Goodridge Braided Lines :: JDM Front Bar :: Corazon Grille :: Pioneer AVH-X8650BT / Alpine PDX5 Amp
Current Plans:Whiteline SwayBars ::
Modifications:
19" Rays/Volk GT30 Wheels :: Hi Tech Mufflers :: HKS Panel Filter :: STi Front Lip :: 6000K HID Driving/Fog Lights :: LED Parkers/Licence/Map/Dome :: Brembo Package :: V-Tune :: Tein Flex Coilovers & EDFC Controller :: HKC Carbon Bonnet Scoop :: Hanabi Smoked LED Rear Tail Lights :: Eyelids :: Goodridge Braided Lines :: JDM Front Bar :: Corazon Grille :: Pioneer AVH-X8650BT / Alpine PDX5 Amp
Current Plans:Whiteline SwayBars ::
-
THERB3 - -stickered-
- Posts: 1522
- Joined: Sun Jun 08, 2008 8:05 am
- Location: Melbourne
- Car: MY05 Subaru Liberty 3.0RB Wagon
- Real name: Hazza
Re: WTB air duct for a GT bonnet
by Kevlar GT » Tue Jun 29, 2010 3:41 pm
I bought some LED tail lights a while back (which have since been removed from my car thanks to someone smashing one of them). Can't recall postage exactly but I find most things from the US have a ridiculous postage cost associated with them. Like $50AUD for a watch I recently purchased from the states.
-
Kevlar GT - Posts: 1707
- Joined: Mon Jan 14, 2008 2:48 pm
- Location: Canberra (Southside of town)
- Car: 04 GT Wagon
Re: WTB air duct for a GT bonnet
by smythie » Tue Jun 29, 2010 4:44 pm
You mean the guy who Ric has set up the hkc-speed.com sub forum in the commercial vendors section in here for?THERB3 wrote:Sorry guys Stanza CF Bulge Scoop he is from the US
Company he is on ebay or order through the net. Name is HKC-Speed
Flag Bitch
MY06 3.0RB
MY06 3.0RB
-
smythie - Posts: 5227
- Joined: Mon Oct 27, 2008 12:46 pm
- Location: Sydney (w-end)
- Car: MY06 3RB - Blue
Re: WTB air duct for a GT bonnet
by tangcla » Tue Jun 29, 2010 4:59 pm
The one and the same.
Hmm... I'm interested in the scoop for myself... Harry did you still want my OEM one with the ARC trim?
but first you said 40mm, now it's more like 45mm?
Hmm... I'm interested in the scoop for myself... Harry did you still want my OEM one with the ARC trim?
but first you said 40mm, now it's more like 45mm?
www.tangcla.com - photography
Canon 5D Mark III x2 | 16-35mm f/2.8L | 24-70mm f/2.8L IS | 70-200mm f/2.8L IS
100mm f/2.8L IS macro | 200mm f/2.0L IS | 580EX-II x2 | 430EX-II | PocketWizard TT1/TT5
Canon 5D Mark III x2 | 16-35mm f/2.8L | 24-70mm f/2.8L IS | 70-200mm f/2.8L IS
100mm f/2.8L IS macro | 200mm f/2.0L IS | 580EX-II x2 | 430EX-II | PocketWizard TT1/TT5
-
tangcla - Posts: 7409
- Joined: Wed Aug 15, 2007 1:47 pm
- Location: Melbourne, VIC
- Car: B6 Audi S4 (4.2L V8)
- Real name: Clarence
- Profile URL: http://www.tangcla.com
Re: WTB air duct for a GT bonnet
by THERB3 » Tue Jun 29, 2010 5:27 pm
Clarence it is defiantly 45mm. I have been speaking to Jimmy through email the last few hours and I am working out a price cause the $200 dollars delivery was a lot in my eyes. So I am waiting on his final quote and let you know. All I know it will be a lot better than the original.
With your scoop PM me a $$$.
With your scoop PM me a $$$.
Last edited by THERB3 on Tue Jun 29, 2010 6:03 pm, edited 2 times in total.
MY05 Subaru Liberty Wagon 3.0RB Silver 6MT
Modifications:
19" Rays/Volk GT30 Wheels :: Hi Tech Mufflers :: HKS Panel Filter :: STi Front Lip :: 6000K HID Driving/Fog Lights :: LED Parkers/Licence/Map/Dome :: Brembo Package :: V-Tune :: Tein Flex Coilovers & EDFC Controller :: HKC Carbon Bonnet Scoop :: Hanabi Smoked LED Rear Tail Lights :: Eyelids :: Goodridge Braided Lines :: JDM Front Bar :: Corazon Grille :: Pioneer AVH-X8650BT / Alpine PDX5 Amp
Current Plans:Whiteline SwayBars ::
Modifications:
19" Rays/Volk GT30 Wheels :: Hi Tech Mufflers :: HKS Panel Filter :: STi Front Lip :: 6000K HID Driving/Fog Lights :: LED Parkers/Licence/Map/Dome :: Brembo Package :: V-Tune :: Tein Flex Coilovers & EDFC Controller :: HKC Carbon Bonnet Scoop :: Hanabi Smoked LED Rear Tail Lights :: Eyelids :: Goodridge Braided Lines :: JDM Front Bar :: Corazon Grille :: Pioneer AVH-X8650BT / Alpine PDX5 Amp
Current Plans:Whiteline SwayBars ::
-
THERB3 - -stickered-
- Posts: 1522
- Joined: Sun Jun 08, 2008 8:05 am
- Location: Melbourne
- Car: MY05 Subaru Liberty 3.0RB Wagon
- Real name: Hazza
Re: WTB air duct for a GT bonnet
by THERB3 » Tue Jun 29, 2010 5:59 pm
More pics
- Attachments
-
- 15.jpg (211.1 KiB) Viewed 3460 times
-
- 17.jpg (218.12 KiB) Viewed 3460 times
-
- 10.jpg (63.23 KiB) Viewed 3460 times
MY05 Subaru Liberty Wagon 3.0RB Silver 6MT
Modifications:
19" Rays/Volk GT30 Wheels :: Hi Tech Mufflers :: HKS Panel Filter :: STi Front Lip :: 6000K HID Driving/Fog Lights :: LED Parkers/Licence/Map/Dome :: Brembo Package :: V-Tune :: Tein Flex Coilovers & EDFC Controller :: HKC Carbon Bonnet Scoop :: Hanabi Smoked LED Rear Tail Lights :: Eyelids :: Goodridge Braided Lines :: JDM Front Bar :: Corazon Grille :: Pioneer AVH-X8650BT / Alpine PDX5 Amp
Current Plans:Whiteline SwayBars ::
Modifications:
19" Rays/Volk GT30 Wheels :: Hi Tech Mufflers :: HKS Panel Filter :: STi Front Lip :: 6000K HID Driving/Fog Lights :: LED Parkers/Licence/Map/Dome :: Brembo Package :: V-Tune :: Tein Flex Coilovers & EDFC Controller :: HKC Carbon Bonnet Scoop :: Hanabi Smoked LED Rear Tail Lights :: Eyelids :: Goodridge Braided Lines :: JDM Front Bar :: Corazon Grille :: Pioneer AVH-X8650BT / Alpine PDX5 Amp
Current Plans:Whiteline SwayBars ::
-
THERB3 - -stickered-
- Posts: 1522
- Joined: Sun Jun 08, 2008 8:05 am
- Location: Melbourne
- Car: MY05 Subaru Liberty 3.0RB Wagon
- Real name: Hazza
Re: WTB air duct for a GT bonnet
by THERB3 » Wed Jun 30, 2010 7:24 am
Alright guys I have ordered this Stanza Bulge CF bonnet scoop.
Jimmy was very helpful with this transaction and I am very happy with the actual price I received it for.
Delivered to my door was $200 dollars US for the product and delivery, so converted to Australian dollars was $240.37
I will take a few shots once received and if anyone is intrested I will supply you the actual link for the purchase that Jimmy supplied.
Jimmy was very helpful with this transaction and I am very happy with the actual price I received it for.
Delivered to my door was $200 dollars US for the product and delivery, so converted to Australian dollars was $240.37
I will take a few shots once received and if anyone is intrested I will supply you the actual link for the purchase that Jimmy supplied.
MY05 Subaru Liberty Wagon 3.0RB Silver 6MT
Modifications:
19" Rays/Volk GT30 Wheels :: Hi Tech Mufflers :: HKS Panel Filter :: STi Front Lip :: 6000K HID Driving/Fog Lights :: LED Parkers/Licence/Map/Dome :: Brembo Package :: V-Tune :: Tein Flex Coilovers & EDFC Controller :: HKC Carbon Bonnet Scoop :: Hanabi Smoked LED Rear Tail Lights :: Eyelids :: Goodridge Braided Lines :: JDM Front Bar :: Corazon Grille :: Pioneer AVH-X8650BT / Alpine PDX5 Amp
Current Plans:Whiteline SwayBars ::
Modifications:
19" Rays/Volk GT30 Wheels :: Hi Tech Mufflers :: HKS Panel Filter :: STi Front Lip :: 6000K HID Driving/Fog Lights :: LED Parkers/Licence/Map/Dome :: Brembo Package :: V-Tune :: Tein Flex Coilovers & EDFC Controller :: HKC Carbon Bonnet Scoop :: Hanabi Smoked LED Rear Tail Lights :: Eyelids :: Goodridge Braided Lines :: JDM Front Bar :: Corazon Grille :: Pioneer AVH-X8650BT / Alpine PDX5 Amp
Current Plans:Whiteline SwayBars ::
-
THERB3 - -stickered-
- Posts: 1522
- Joined: Sun Jun 08, 2008 8:05 am
- Location: Melbourne
- Car: MY05 Subaru Liberty 3.0RB Wagon
- Real name: Hazza
Re: WTB air duct for a GT bonnet
by THERB3 » Thu Jul 08, 2010 9:10 am
I received the bonnet scoop today and there was a nice surprise when I opened the box... 
Emailed Jimmy from HKC-Speed see what he says about the situation. MAN I AM PISSED WHEN THAT HAPPENS.
Emailed Jimmy from HKC-Speed see what he says about the situation. MAN I AM PISSED WHEN THAT HAPPENS.
- Attachments
-
- scoop5.jpg (135.6 KiB) Viewed 3433 times
-
- scoop3.jpg (176.04 KiB) Viewed 3433 times
MY05 Subaru Liberty Wagon 3.0RB Silver 6MT
Modifications:
19" Rays/Volk GT30 Wheels :: Hi Tech Mufflers :: HKS Panel Filter :: STi Front Lip :: 6000K HID Driving/Fog Lights :: LED Parkers/Licence/Map/Dome :: Brembo Package :: V-Tune :: Tein Flex Coilovers & EDFC Controller :: HKC Carbon Bonnet Scoop :: Hanabi Smoked LED Rear Tail Lights :: Eyelids :: Goodridge Braided Lines :: JDM Front Bar :: Corazon Grille :: Pioneer AVH-X8650BT / Alpine PDX5 Amp
Current Plans:Whiteline SwayBars ::
Modifications:
19" Rays/Volk GT30 Wheels :: Hi Tech Mufflers :: HKS Panel Filter :: STi Front Lip :: 6000K HID Driving/Fog Lights :: LED Parkers/Licence/Map/Dome :: Brembo Package :: V-Tune :: Tein Flex Coilovers & EDFC Controller :: HKC Carbon Bonnet Scoop :: Hanabi Smoked LED Rear Tail Lights :: Eyelids :: Goodridge Braided Lines :: JDM Front Bar :: Corazon Grille :: Pioneer AVH-X8650BT / Alpine PDX5 Amp
Current Plans:Whiteline SwayBars ::
-
THERB3 - -stickered-
- Posts: 1522
- Joined: Sun Jun 08, 2008 8:05 am
- Location: Melbourne
- Car: MY05 Subaru Liberty 3.0RB Wagon
- Real name: Hazza
Re: WTB air duct for a GT bonnet
by Arith » Thu Jul 08, 2010 9:20 am
Bah! I'm sure a few cable ties will fix that! Cable ties fix everything! LOL.
But seriously, sorry to hear about your situation. I know you're pretty eager to fit it on, now it'll be another week or two yet. Did you get or was there an option for shipping insurance, which covers lost of damaged goods? Because depending on the seller, they may say the damage was the result of the shipping. But I haven't heard of any complaints about HKC-Speed so hopefully he'll just send you another one and have you send back the damaged one.
LOL.But seriously, sorry to hear about your situation. I know you're pretty eager to fit it on, now it'll be another week or two yet. Did you get or was there an option for shipping insurance, which covers lost of damaged goods? Because depending on the seller, they may say the damage was the result of the shipping. But I haven't heard of any complaints about HKC-Speed so hopefully he'll just send you another one and have you send back the damaged one.
[ Former Liberty ... Slightly Modified -> Click here for modifications & profile ]
-
Arith - -stickered-
- Posts: 6111
- Joined: Mon Oct 08, 2007 2:05 am
- Location: Sydney (Wes-Sieed!)
- Car: MY11 Volvo S60 T6
- Real name: Jim
Re: WTB air duct for a GT bonnet
by senator » Thu Jul 08, 2010 10:33 am
Bugger
Is it just the clear coat which has been cracked? Or is it the fibre as well?
Btw do mind posting pics of the under side of the scoop, I am interested to see the mounting surface.
Is it just the clear coat which has been cracked? Or is it the fibre as well?
Btw do mind posting pics of the under side of the scoop, I am interested to see the mounting surface.
Not a soobi anymore, but still slightly dirty
"TEAM TONY"
"TEAM TONY"
-
senator - Posts: 3217
- Joined: Sun Apr 15, 2007 8:53 pm
- Location: SYDNEY
Re: WTB air duct for a GT bonnet
by THERB3 » Thu Jul 08, 2010 11:27 am
It looks like only the clear coat has been cracked ? Is it repairable I wouldn't have a clue.
I wish I could take a photo but it's in the panel beaters hands right now but the fitment is perfect.
What I can describe of the underneath is that there is the 5 threads where the nuts are going to hold it in place with a little of double sided tape at the top.
I have to say it is a nice finish product but it is a shame that in transit this can happen. I know how things get treated as freight cause I work at the airport and know how freight gets treated. They should of mark the carton as FRAGILE aswell.
Awaiting on Jimmys email about the situation fingers crossed.
I wish I could take a photo but it's in the panel beaters hands right now but the fitment is perfect.
What I can describe of the underneath is that there is the 5 threads where the nuts are going to hold it in place with a little of double sided tape at the top.
I have to say it is a nice finish product but it is a shame that in transit this can happen. I know how things get treated as freight cause I work at the airport and know how freight gets treated. They should of mark the carton as FRAGILE aswell.
Awaiting on Jimmys email about the situation fingers crossed.
MY05 Subaru Liberty Wagon 3.0RB Silver 6MT
Modifications:
19" Rays/Volk GT30 Wheels :: Hi Tech Mufflers :: HKS Panel Filter :: STi Front Lip :: 6000K HID Driving/Fog Lights :: LED Parkers/Licence/Map/Dome :: Brembo Package :: V-Tune :: Tein Flex Coilovers & EDFC Controller :: HKC Carbon Bonnet Scoop :: Hanabi Smoked LED Rear Tail Lights :: Eyelids :: Goodridge Braided Lines :: JDM Front Bar :: Corazon Grille :: Pioneer AVH-X8650BT / Alpine PDX5 Amp
Current Plans:Whiteline SwayBars ::
Modifications:
19" Rays/Volk GT30 Wheels :: Hi Tech Mufflers :: HKS Panel Filter :: STi Front Lip :: 6000K HID Driving/Fog Lights :: LED Parkers/Licence/Map/Dome :: Brembo Package :: V-Tune :: Tein Flex Coilovers & EDFC Controller :: HKC Carbon Bonnet Scoop :: Hanabi Smoked LED Rear Tail Lights :: Eyelids :: Goodridge Braided Lines :: JDM Front Bar :: Corazon Grille :: Pioneer AVH-X8650BT / Alpine PDX5 Amp
Current Plans:Whiteline SwayBars ::
-
THERB3 - -stickered-
- Posts: 1522
- Joined: Sun Jun 08, 2008 8:05 am
- Location: Melbourne
- Car: MY05 Subaru Liberty 3.0RB Wagon
- Real name: Hazza
Re: WTB air duct for a GT bonnet
by THERB3 » Thu Jul 08, 2010 12:40 pm
Guys how would I know if the item was sent by registered post ?
Personally I dont think soo, cause there is nothing on the actual box stating it.
Personally I dont think soo, cause there is nothing on the actual box stating it.
MY05 Subaru Liberty Wagon 3.0RB Silver 6MT
Modifications:
19" Rays/Volk GT30 Wheels :: Hi Tech Mufflers :: HKS Panel Filter :: STi Front Lip :: 6000K HID Driving/Fog Lights :: LED Parkers/Licence/Map/Dome :: Brembo Package :: V-Tune :: Tein Flex Coilovers & EDFC Controller :: HKC Carbon Bonnet Scoop :: Hanabi Smoked LED Rear Tail Lights :: Eyelids :: Goodridge Braided Lines :: JDM Front Bar :: Corazon Grille :: Pioneer AVH-X8650BT / Alpine PDX5 Amp
Current Plans:Whiteline SwayBars ::
Modifications:
19" Rays/Volk GT30 Wheels :: Hi Tech Mufflers :: HKS Panel Filter :: STi Front Lip :: 6000K HID Driving/Fog Lights :: LED Parkers/Licence/Map/Dome :: Brembo Package :: V-Tune :: Tein Flex Coilovers & EDFC Controller :: HKC Carbon Bonnet Scoop :: Hanabi Smoked LED Rear Tail Lights :: Eyelids :: Goodridge Braided Lines :: JDM Front Bar :: Corazon Grille :: Pioneer AVH-X8650BT / Alpine PDX5 Amp
Current Plans:Whiteline SwayBars ::
-
THERB3 - -stickered-
- Posts: 1522
- Joined: Sun Jun 08, 2008 8:05 am
- Location: Melbourne
- Car: MY05 Subaru Liberty 3.0RB Wagon
- Real name: Hazza
Re: WTB air duct for a GT bonnet
by senator » Thu Jul 08, 2010 1:34 pm
THERB3 wrote:It looks like only the clear coat has been cracked ? Is it repairable I wouldn't have a clue.
.
Clear coat can be reapplied, just need to soda blast the original costing off.
Make sure the you get a UV stabilised coating to ensure it does not cloud up over time.
Not a soobi anymore, but still slightly dirty
"TEAM TONY"
"TEAM TONY"
-
senator - Posts: 3217
- Joined: Sun Apr 15, 2007 8:53 pm
- Location: SYDNEY
52 posts
• Page 2 of 4 • 1, 2, 3, 4
Who is online
Users browsing this forum: No registered users and 4 guests