White Fog Lights at LAST!!!!!!

[castek]

$200? lol no way

but definately agree, i wouldnt bother using HID high beams. I use mine a bit on back roads etc and they are obviously brighter than the HID.

i dunno, maybe a set of 55W ballasts might do the trick, but definately not worth the hassle, plus if you are running low beam and driving light HID's, where the hell are ya gonna mount another set of ballasts :p

[Famma]

Thats why I left the High Beams Standard! I think it's just a wast of money I could be spending on something else! And yes the halogens do shine further and they penetrate better in misty conditions. Happy to have white fogs and parkers to match my Xenon's.

[martian2go]

How do you replace the foglights ?

[t.renshaw34]

I just finished doing my HID fogs last week. I did mine from under the car, put it up on my car ramps. removed the slash gaurd in the wheel arch and the fog light is right there behind it.

[seanmau5]

How do you replace the foglights ?

Do you need to replace the foglights or do you need to replace the globes??

[t.renshaw34]

Just the globes. .

[seanmau5]

How do you replace the foglights ?

Just the globes. .

Its easiest to pull the foglight housing out through the front bar, remove the surrounds around the housing and as Taylor said you also need to access from under the car to undo the bolts holding them in place.

[MRLOBB]

Is there a trick to remove the driving lights.........as I am about to do the same as you.

[d-chang]

Is there a trick to remove the driving lights.........as I am about to do the same as you.

Easiest way for me which took a little bit of fiddling... remove the mud guard from underneath and using a detachable sprocket set and get the bolt from there, 2 bolts... all in all took me about 20 minutes to do one fog light. Driving/main headlight takes 5 mins if that, remove cap and undo wire holder and it comes out!

Hope that made sense...

[markii]

Hey mate, looks great. Do you have the part number for these by any chance?

Cheers!

[andy85]

So damn SEXY!!!!

[zch91]

Hey mate, looks great. Do you have the part number for these by any chance?

Cheers!

http://www.ebay.com.au/sch/i.html?_trkp ... p=15&_sc=1

[Boostaddict]

Sorry to dig up an old thread AGAIN. But can someone confirm if the globes are a HB4 in the foggies or a HB3 ??

The reason i ask is cause i dont have access to my car at the moment. And i thought that the H4 configuration was a dual filament and thus a HB4 would be a dual filament.???

[B4ITZUP]

And i thought that the H4 configuration was a dual filament and thus a HB4 would be a dual filament.???

Dual filament? did you mean it can be high and low?

HB4 is used for MY07+ models foglight and it only product single light output unlike H4

HB3 is for high beam for the same model

[Boostaddict]

And i thought that the H4 configuration was a dual filament and thus a HB4 would be a dual filament.???

Dual filament? did you mean it can be high and low?

Yes high and low.

HB4 is used for MY07+ models foglight and it only product single light output unlike H4

HB3 is for high beam for the same model

I swear that when i looked last that the foggies and high beams had the same product number!! Oh well i will check when the car gets back.