Full LED taillights for 03~09 Legacy/Outback (BP5/BP9/BPE)

[gubbo]

They do look nice... can't decide if i should get this or do something else...hmm...
why such a long list of people required?

[twpanson]

only 3 pply are required for 1st bracket group buy price. The more ppl get in, the lower group buy price can be achieved!!!

TWP

[Posseltperformance]

exactly the more people the cheaper they are...

[twpanson]

old confusing words deleted

[Lib 3.0LR]

Hi Panson thinking of buying a set of type 3 lights after Xmas off you
Cheers George

[twpanson]

No problem, Sir.

Also, since the signals on our lamps are all LED bulbs. It is necessary to replace the stock flasher module to prevent the hyper blinker problem.
Of course the necessary flasher module relay will be included in the package.

Thanks for the interest
TWP
twptrade.com

[hamish_023]

No problem, Sir.

Also, since the signals on our lamps are all LED bulbs. It is necessary to replace the stock flasher module to prevent the hyper blinker problem.
Of course the necessary flasher module relay will be included in the package.

Thanks for the interest
TWP
twptrade.com

Hmmm? so not your just easy plug & play???

[Lib 3.0LR]

I was under the same impression plug and play.That's interesting now

[twpanson]

No problem, Sir.

Also, since the signals on our lamps are all LED bulbs. It is necessary to replace the stock flasher module to prevent the hyper blinker problem.
Of course the necessary flasher module relay will be included in the package.

Thanks for the interest
TWP
twptrade.com

Hmmm? so not your just easy plug & play???

It's still easy plug-n-play. You only need to locate the old flahser module at the driver side kick panel. Take the old one out and put in the necessary flasher module in.

That's it.

Here are the instruction quoted from an experienced forum member on lgt.com about how to locate the stock Denso flasher module.

""Denso flasher module is labeled B32 on the "Turn Signal Light and Hazard Light System" electrical plan.
You do not have to open the module for this mod,
Drop the kick panel under the dash, open the fuse flap by your knee, there is a relay pack (full of blue cubes) snapped to the side of the fuse panel, reaching in through the fuse access press the two tabs and slide the relay pack forward (toward the driver).
You have to kind of "twist" the last bit away from the panel then the relay pack drops down. It's kinda packed in there tight. The stock Denso flasher module is clipped on the top of this relay pack. Insert a slim tool under the flasher module tab from the back (connector side) and then it slides off the pack.. Undo the connector and you've got the module in your hand."""

[Lib 3.0LR]

Thanks Panson for that, does'nt look that hard to do.

[05GTLIBERTY]

pretty simple, just need some for sedans!

[04GTLIB]

Sir, you are absolutely right!!!
-------------------------------------------------------------------
If we can get 3-6 ppl price will be US$370 shipped to anywhere in Australia
7-12 ppl price will be US$350 shipped to anywhere in Australia
13-20 ppl price will be US$330 shipped to anywhere in Australia
21 and up price will be US$300 shipped to anywhere in Australia
This is NOT a real group buy, just to test market and see if there are ppl interesed in our LED tail lamps.

1. Posselt Performance (Ryan) - Type 3
2. Lib 3.0LR (George)- Type 3
3. Hamish_0023 (Hamish lol)- Type 1
4. 04GTLIB (Russell) - Type 3.
5.
6.
TWP CO. LTD.
twptrade.com

[twpanson]

pretty simple, just need some for sedans!

Sir,

Thanks for the interest. We have been getting more inquires on sedan LED tails than Wagon's. This will be our 1st priority at the coming RD meeting.

Personally, I don't know why there haven't been any Japanese brand selling Sedan LED tails. Does Subaru change sedan tail lights' mounting points or design a lot during 2003-2009???
That's the only reason I can think of about why other lamp manufacturers wouldn't invest on manufacturing 03-09 Subaru Legacy Sedan's tail lamps.

Any Sedan owners, you are welcome to chime in. ( I drive a wagon, so I am not familiar w/ the change on Sedan's tail lampls)


Panson
TWP
twptrade.com

[smythie]

yes, the JDM (and ADM, not sure about the USDM) Legacy changed head and tail lights with the MY07 facelift.

From what I can tell, the mounting points for the lights are the same as there have been one or two industrious souls who have changed from the pre-facelift to the facelift rear end (which also involves getting the newer bumper) and only needing an extra bracket or two.

Pre-facelift rear


Facelift rear

[twpanson]

smythie, thanks for the informationa and pictures. I will let our RD guys know about this!!!!

All the wagon lovers, let's put this group buy in real!!!!!!!!!!!
I have changed the first post to group buy detail. After studying the market interests, we decide to offer Type3 LED Tails as the only option for group buy.

Please post your name again, for the REAL group buy.

1.
2.
3.
4.
...