Si Drive- What do you think?

Nearly everything is in here to start with.
If it's about your car, or Subaru's in general, put it in "Subaru Chat".

Si Drive- What do you think?

Postby buggermedumplings » Thu Jul 12, 2007 11:21 am

Thought it was more of a PR exercise than anything and even when I test drove the car it went straight into S# but after living with it, it's actually quite good.

For my daily peak hour driving, I-mode works fine, gear changes are early so no over-revving or jerkiness. When I need to merge lanes etc, switch to S# and works well. S-mode pretty much same as I-Mode but gives you a bit more top end. S#-I think is a little harsh for peak hour driving.

I obviously have the auto which I think it's more suited to, how do people find it with the manual?
buggermedumplings
 
Posts: 80
Joined: Tue Jun 05, 2007 8:00 pm
Location: Melbourne, Vic

Postby stuntgirl » Thu Jul 12, 2007 11:43 am

i think its awesome...

i too thought i t was a bit gimmicky... but if you use it the right way its a very valuable little tool 8)
YOU WOULD BE COOLER IF YOU WERE ME!
User avatar
stuntgirl
 
Posts: 352
Joined: Tue Oct 10, 2006 12:48 am

Postby RAS » Thu Jul 12, 2007 1:00 pm

I have SI with a manual. For me I use S 99% of the time, and S# 1% of the time when I have a rush of blood or when I am driving in the country and there is overtaking involved where I want the power to come on quick. For me I-Mode has no place with a manual transmission as you have contol over changes and revs already. It feels bloody awful when you put it on.
094/300 MY07 GT t/b STi
User avatar
RAS
 
Posts: 48
Joined: Mon May 14, 2007 2:17 pm
Location: Melbourne, Vic

Postby bonski » Thu Jul 12, 2007 1:05 pm

For me it would be a waste of time as I would have it on the highest setting 100% of the time.
User avatar
bonski
 
Posts: 399
Joined: Thu Nov 30, 2006 12:27 pm
Location: Melbourne

Postby CheesyMong » Thu Jul 12, 2007 1:44 pm

Does anyone know if you can set it to S# permanently, it seems to default back to S all the time?
CheesyMong
 
Posts: 386
Joined: Thu Jul 05, 2007 12:58 pm
Location: Perth
Car: MY07 Liberty GT-B 6MT

Postby OzSTi » Thu Jul 12, 2007 1:45 pm

I've had an Ecutek reflash and this has improved all settings, especially S#.

At the present in S# full accelerator = 100% WOT whereas in standard trim 65% accelerator = 100% WOT. With current power levels the acceleator would have been a bit like an on/off switch if still using the standard compressed accelerator to throttle ratio.

We're going to change this next week to 80% accelerator = WOT to sharpen it a bit and make the S mode more meaningful. That is if S# is too responsive for traffic I'd use S more.

'I' is ok for going downhill :D
Michael.
User avatar
OzSTi
 
Posts: 426
Joined: Mon Feb 19, 2007 5:45 pm
Location: Adelaide
Car: '16 Mustang GT
Real name: Michael
Profile URL: viewtopic.php?f=10&t=23470

Postby buggermedumplings » Thu Jul 12, 2007 3:42 pm

CheesyMong wrote:Does anyone know if you can set it to S# permanently, it seems to default back to S all the time?


Believe it reverts back to previously selected mode when ignition is switched off.
buggermedumplings
 
Posts: 80
Joined: Tue Jun 05, 2007 8:00 pm
Location: Melbourne, Vic

Postby OzSTi » Thu Jul 12, 2007 4:32 pm

Yes you can't select S# whilst engine is cold ie the blue light is on in temp guage. Were you not told this at delivery?
Michael.
User avatar
OzSTi
 
Posts: 426
Joined: Mon Feb 19, 2007 5:45 pm
Location: Adelaide
Car: '16 Mustang GT
Real name: Michael
Profile URL: viewtopic.php?f=10&t=23470

Postby CheesyMong » Thu Jul 12, 2007 4:37 pm

OzSTi wrote:Yes you can't select S# whilst engine is cold ie the blue light is on in temp guage. Were you not told this at delivery?


Yeah I was, I just realised why it reverts to s mode when you reminded me about the engine being cold....thx
CheesyMong
 
Posts: 386
Joined: Thu Jul 05, 2007 12:58 pm
Location: Perth
Car: MY07 Liberty GT-B 6MT

Postby MY07GT » Thu Jul 12, 2007 6:00 pm

Im with RAS. 90% S mode and 10% S#.

But at the moment it wont allow me to use S# so im in S mode 100%. LOL! My car is definately faster than a lib with S# mode though. haha

Phil.
[TEAM FUNERAL]
Image
[MY07GT]
club.liberty.asn.au
User avatar
MY07GT
 
Posts: 2189
Joined: Sat Oct 07, 2006 9:29 am
Location: Sydney
Real name: Phil

Postby Mo_GT » Thu Jul 12, 2007 7:30 pm

I find the whole SI drive useless - i have it on S# almost all the time. I've had on "I" a few time during heavy traffic but at low revs i really don't see how I is different from S# - it might save a bit of fuel but other than that it doesn't make a difference to me.

For me and for my reasons on why i bought a GT - the SI drive has no place in the car. And the headlight washer things too - makes no difference to me.

Btw - mines a manual. Its wiered dropin' to 5th :D
Never Argue With An Idiot... They'll Drag You Down To Their Level And Then Beat You With Experience.
User avatar
Mo_GT
 
Posts: 697
Joined: Wed Oct 11, 2006 7:48 pm
Location: Perth
Car: GT Spec B

Postby GTSPECB STI » Fri Jul 13, 2007 1:28 pm

S+ 99% of time, S while warming up. Once I get her flashed then I might use S mode too.
MY10 Forester XTP
GTSPECB STI
-stickered-
 
Posts: 1836
Joined: Tue Jun 19, 2007 4:26 pm
Location: Perth

Postby MY07GT » Fri Jul 13, 2007 4:22 pm

I agree the I mode is a waste of time. See no benefit at all. In manual u need to keep an eye on the green shift light, whilst trying to also keep an eye on the road. Then when u change on the indicator ur car jerks as the revs are too low. Waste of time imo. But I do enjoy it as a gadget for the car.

Washes I prefer we didnt have it but unfortunately the stupid law says xenons need them. I do however think it looks better on the headlight unit itself, rather than the front bar as all other cars do.

Phil.
[TEAM FUNERAL]
Image
[MY07GT]
club.liberty.asn.au
User avatar
MY07GT
 
Posts: 2189
Joined: Sat Oct 07, 2006 9:29 am
Location: Sydney
Real name: Phil

Postby Mo_GT » Sat Jul 14, 2007 12:46 am

MY07GT wrote:
Washes I prefer we didnt have it but unfortunately the stupid law says xenons need them. I do however think it looks better on the headlight unit itself, rather than the front bar as all other cars do.

Phil.


Right, i didn't know it was cos of some law... but yeah, better built into the light itself than on the bumper.

But why did it have to be chrome...wonder if i can paint mine black...
Never Argue With An Idiot... They'll Drag You Down To Their Level And Then Beat You With Experience.
User avatar
Mo_GT
 
Posts: 697
Joined: Wed Oct 11, 2006 7:48 pm
Location: Perth
Car: GT Spec B

Postby bonski » Sat Jul 14, 2007 8:59 am

/quote]

Right, i didn't know it was cos of some law... but yeah, better built into the light itself than on the bumper.

[/quote]

FYI

Law for Xenons is

1. Washers
2. Auto Leveling
User avatar
bonski
 
Posts: 399
Joined: Thu Nov 30, 2006 12:27 pm
Location: Melbourne

Next

Return to General Chat

Who is online

Users browsing this forum: No registered users and 13 guests