by Arith » Wed Nov 24, 2010 8:58 pm
Thanks for the mention Leo. Luckily I've had the privilege of watching Phat GT installl my non-Spec B front bar first hand when I had my Zero/Sports front lip fitted. Don't get me wrong, the Spec B front bar is nice with the STi lip, but I found the curves of the Zero/Sports lip more appealing. And unfortunately the Zero/Sports lip looked better matched with the non-Spec B front bar.
With the post-face lifted Gen IV Libertys, Subaru made the parts a lot more interchangeable to save on costs and parts. This works out well for those of us who want to swap around.
So the only thing you need to change to a Spec B bumper:
1) x1 Spec B bumper
2) x2 foglight surrounds
As for the remaining bits
* Foglights - The foglights and mounts were a straight swap with no modification or additional parts required
* Grill - Interchangeable grill so it will fit the Spec B bumper without issue
* Reinforcement Bar - Interchangeable so it's a straight swap
* Wheel Arch Lining - Will fit both bumpers so no need for replacement or modification
* Clips & Mounting Points - Same same
* Toe Hook Cover - The non-Spec B bumper has an additional cover for the toe hook. On the Spec B it hides behind the elongated foglight surround so no additional cover is required
* Front Lip - The front lip is NOT interchangeable between the two bumpers. So if you plan on changing, change the bumper first and then get the lip. However I have heard of people 'making' the lip fit from one to the other with some modifications.
Let me know if you're interested in making this happen. I have a spare set of genuine Subaru Spec B foglight surrounds that are still unopened that I will sell for very cheap. It's also too bad you're not in Sydney, as the smash repair shop may still have my old Spec B front bar and said they would let it go for cheap.
[ Former Liberty ... Slightly Modified -> Click here for modifications & profile ]