My new liberty with mods :)

[<GB>]

Are you going to fix that yourself?

Nope, its going back they installed them so hopefully they fix that on there own back plus ive gotta get more cold start work done and test the back pressure in the exhaust

[bigBADbenny]

Bastardos! Hey one more peanut question:

I have to move the heat-shield under the car to zip-tie the reverse lockout cable out of the way of the drive shaft (Cobb shifter installed)

Is it OK to unscrew the O2 sensor to enable that and then just reinstall it when I'm done? Cheers, Ben

[<GB>]

Bastardos! Hey one more peanut question:

I have to move the heat-shield under the car to zip-tie the reverse lockout cable out of the way of the drive shaft (Cobb shifter installed)

Is it OK to unscrew the O2 sensor to enable that and then just reinstall it when I'm done? Cheers, Ben

yeah bro all good, just be careful not to round the nut, exhaust stuff can be hard to remove

[bigBADbenny]

I'll be sure to use my 20ft breaker bar n that case Cheers!!!

[<GB>]

Car went back to springy to fix the injector seals and tidy up the cold start. Got him to pressure test the exhaust cause we suspected the cat was causing a 10psi restriction which was the case. Cat punched ATM till I figure what I'm going to do. Cars making 294awkw on 98 which isn't what I wanted but it will do for the moment lol

[dr20t]

Only 294kw atw - you poor soul you.....

Lol

You make it sound like an impediment!!

Glad you're fixing some of those niggling issues and getting the most out of the car

Mick

[Boostaddict]

Car went back to springy to fix the injector seals and tidy up the cold start. Got him to pressure test the exhaust cause we suspected the cat was causing a 10psi restriction which was the case. Cat punched ATM till I figure what I'm going to do. Cars making 294awkw on 98 which isn't what I wanted but it will do for the moment lol

Man i really feel for you..... 294 awkw would be SO HARD to live with.!!!

Feck this thing will be ridiculous once sorted !!

[jacks-GTB]

Car went back to springy to fix the injector seals and tidy up the cold start. Got him to pressure test the exhaust cause we suspected the cat was causing a 10psi restriction which was the case. Cat punched ATM till I figure what I'm going to do. Cars making 294awkw on 98 which isn't what I wanted but it will do for the moment lol

Nice one Brandon

Now burn some rubber

[<GB>]

Goal was 300awkw on 98 on my current turbo that's internal gated

[senator]

Goal was 300awkw on 98 on my current turbo that's internal gated

Is this the MRT “special” turbo?

[<GB>]

Goal was 300awkw on 98 on my current turbo that's internal gated

Is this the MRT “special” turbo?

nope the one they had was way smaller, this is some custom unit thats been made into ball bearing blah blah blah, 3.5k will have you one lol atp in melbourne made it for this car,danny likes the turbo though

[bigBADbenny]

Still on the original FMIC/piping?

[<GB>]

yes ben, dont think it was as bad as they said, i might fix the piping up and leave it alone for the time being

[t.renshaw34]

What size is the fmic pipework if you don't mind me asking? .

[<GB>]

Um I think it's 2 hot side 2.5 cold I'll measure it up cause I can't remember, why do u ask?

I don't like the piping and will be changing it soon