Australian Liberty Owners Club

Skip to content

MY12 STi steering wheel install in MY07 GT-B

Show off what mods you've done to your car.
Post a reply

Re: MY12 STi steering wheel install in MY07 GT-B

Postby bigBADbenny » Tue Oct 23, 2012 7:03 pm

Do any preFLs have lots of buttons to control the stereo on the SWC? I've only seen 2 buttons...
User avatar
bigBADbenny
 
Posts: 10478
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop
Top

Re: MY12 STi steering wheel install in MY07 GT-B

Postby SH30RB » Tue Oct 23, 2012 7:08 pm

Track up, track down and "mode" on the left
Volume up, volume down and mute on the right
and then a funny little stuck hanging down behind the wheel for the cruise control
TEAM FUNERAL HEARSE!
Only slightly modified, I swear!
User avatar
SH30RB
-stickered-
 
Posts: 4024
Joined: Sun Aug 07, 2011 8:32 pm
Location: Sydney
Car: 05 Liberty 3.0R-B wagon
Real name: Simon
Profile URL: viewtopic.php?f=10&t=14766
Top

Re: MY12 STi steering wheel install in MY07 GT-B

Postby bigBADbenny » Tue Oct 23, 2012 7:59 pm

Nice! Yeah just get a preFL aftermarket wheel FTW.

K2 REIZ
User avatar
bigBADbenny
 
Posts: 10478
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop
Top

Re: MY12 STi steering wheel install in MY07 GT-B

Postby Corsair » Thu Oct 25, 2012 9:15 pm

Top effort on the install and wheel looks the goods. :good: Takes a special kinda man to brave an airbag in the face.
I got this plan. It's called 'Save Ass'. And the way it works is this - I slip outta one of these windows and I run like a bastard!
User avatar
Corsair
-stickered-
 
Posts: 958
Joined: Sun Sep 18, 2011 12:01 am
Location: Melbourne
Car: MY09 Liberty 2.5i
Profile URL: viewtopic.php?f=10&t=15709
Top

Re: MY12 STi steering wheel install in MY07 GT-B

Postby bigBADbenny » Thu Oct 25, 2012 10:01 pm

Pull negative, pump brake - car is completely dead - get to it.
Most difficult bit is putting the wheel back on aligned properly, still not 100% sure if its straight! :P
Due to road camber mainly, I guess. So follow my tips re: taping AFTER cracking the nut.
I'll recheck it vs alignment and or OBDII steering angle on the ECUds.
It's probably fine though... :roll:
As for the wheel - it's just really nice.
User avatar
bigBADbenny
 
Posts: 10478
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop
Top

Re: MY12 STi steering wheel install in MY07 GT-B

Postby Rome_BRZ » Fri Oct 26, 2012 10:18 am

Benny that looks fantastic! :good:
Rome_BRZ
formerly Rome_STI
 
Posts: 4305
Joined: Wed Apr 13, 2011 8:06 pm
Location: Sydney, NSW
Car: 2015 Audi S3 Sedan
Real name: Jerome
Profile URL: viewtopic.php?f=10&t=12392
Top

Re: MY12 STi steering wheel install in MY07 GT-B

Postby bigBADbenny » Fri Oct 26, 2012 10:42 am

I'm lovin it! Really lifts the interior back to that new feeling.
Just gotta address shifter knob, HB & gear boots maybe, and dust under McIntosh screen.
But no rush...
Oh and do the front seat swap... MY07 to MY08, probably when I drop the new pump in... :P

ECUds doesn't read steering angle alas, would be handy.
User avatar
bigBADbenny
 
Posts: 10478
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop
Top
Previous
Post a reply

Return to Post your mods

Who is online

Users browsing this forum: No registered users and 4 guests

Powered by phpBB® Forum Software © phpBB Group