LED Strip

[hks180]

Hi All

Please go to >>>> viewtopic.php?f=42&t=4596

As you all have seen what you can do with LED strip ... in the boot ... on the door .. head light ... number plate .. etc etc

Some look a bit rice .. some are very useful ..at the end all depends on our personal taste ..

Anyway after my wife ALMOST hit the bottom of the door few times, so i thought better provide better lighting .. and after saw what Jim done ... here comes my version ..


Product - LED strip Type 2 (White) - $15/24cm strip


Standard



No drilling require and still retain the factory door light


View from other side of the door

[hks180]

For Sydney people i'll install them for you if you like but ... it's very easy to do ...plug & play !!

Leo

[gtspec]

i like it

it looks like the light is mounted on the bottom of the door.. do you have any photos of where the lights are mounted and the wire runs too?

[hks180]

i like it

it looks like the light is mounted on the bottom of the door.. do you have any photos of where the lights are mounted and the wire runs too?

Thats correct ... under the door is where i mount them ... and the power is from the factory door light (red light)

Leo

[Digital]

i saw jim posted something about a 'festoon adapter' to get it working with the door lights? do we need this?

how much to get to melb?

[hks180]

i saw jim posted something about a 'festoon adapter' to get it working with the door lights? do we need this?

how much to get to melb?

You can use a festoon adapter but you will loose you little red light ... i think it's a good safety feature to keep that red light ..

Postage ... $2 (regular post in bubble bag)

Cheers

Leo

[Digital]

lol, i see.. umm so how would u hook it up to the exsisting light? (u say it's plug and play)... i just wanna know what im getting myself into hahha leo's instructions included?

[hks180]

lol, i see.. umm so how would u hook it up to the exsisting light? (u say it's plug and play)... i just wanna know what im getting myself into hahha leo's instructions included?

hahaha ... if you can take the cover off the door light and put the cover back in ... then you don't need to worry about anything !!

but i'll will send people step by step instruction ..

when i say plug & play i mean plug it in .. and your done !! haha

anyway don't have any photos to upload at the moment so i'll post some photos later on ..

Leo

[Sentinel]

Looks good Leo!

Does the strip interfer with the door seal at all?

[hks180]

Looks good Leo!

Does the strip interfer with the door seal at all?

Hey steve

so far i have open & close the door 20 to 30 times ... so far so good .. not touching ...

Unless you got some very thick aftermarket door seal ~

Leo

[Digital]

be cool if we could actually get teh cover and change the read to smd briight like on japanparts



leo im keen, will let u know

[hks180]

yeah i guess it's depends on your personal taste .. i quiet like the red light ..

but last night i have tried some festoon led with 1W led & 2 x 1W led .... with out the cover ... 2 x 1W festoon led is pretty good ... not as good as the led strip but not far behind ..

Leo

[CappZ]

Looks good, can you see the wires coming out or anything in the daytime?