AVO TMIC & Power Intake Kit

Show off what mods you've done to your car.

AVO TMIC & Power Intake Kit

Postby GTSPECB STI » Tue Nov 11, 2008 9:39 pm

Look what arrived in the mail today. All go on next week plus the Phat Dump Pipe and Verso Re-tune.

Image

Image
Last edited by GTSPECB STI on Wed Nov 12, 2008 3:22 pm, edited 1 time in total.
MY10 Forester XTP
GTSPECB STI
-stickered-
 
Posts: 1836
Joined: Tue Jun 19, 2007 4:26 pm
Location: Perth

Postby drndrn » Tue Nov 11, 2008 10:37 pm

lookin' good mate!

you planning to tune or do any dyno runs when you install these?
Diamond Grey 2.5i Heritage
User avatar
drndrn
-stickered-
 
Posts: 1498
Joined: Thu Mar 20, 2008 2:15 pm
Location: Glen Waverley, Victoria
Car: MY08 Subaru Liberty

Postby GTSPECB STI » Wed Nov 12, 2008 8:44 am

drndrn wrote:lookin' good mate!

you planning to tune or do any dyno runs when you install these?


My tuner uses Verso (open source) and will be doing a re-tune on the dyno once all mods are completed at their garage next Thursday.
MY10 Forester XTP
GTSPECB STI
-stickered-
 
Posts: 1836
Joined: Tue Jun 19, 2007 4:26 pm
Location: Perth

Postby adam » Thu Nov 20, 2008 1:12 am

bit of a hijack here but all in the same theme...
at last i got mine :lol:

Image

Image
I spend most of my money on booze, fast cars and women, I just waste the rest...
User avatar
adam
 
Posts: 1431
Joined: Wed Feb 14, 2007 10:23 pm
Location: sydney

Postby Arith » Thu Nov 20, 2008 6:43 am

Haha. Adam! That is a total hijack, you terrorist! :D

You need to start your own thread because I'm expecting you to post up pics of the install and how it looks on your car as well.

[ Former Liberty ... Slightly Modified -> Click
here for modifications & profile ]
User avatar
Arith
-stickered-
 
Posts: 6111
Joined: Mon Oct 08, 2007 2:05 am
Location: Sydney (Wes-Sieed!)
Car: MY11 Volvo S60 T6
Real name: Jim

Postby chriskan » Thu Nov 20, 2008 9:16 am

I installed mine last weekend.. it looks like err your old one jim :) and the install was pretty similar too.. 8)
MY07 GT-B T/B STi 6MT OBP
| PHAT Performance Quad Mufflers | HKS Panel Filter & removed resi + CAI pipe |
User avatar
chriskan
 
Posts: 389
Joined: Sun Nov 25, 2007 8:10 pm
Location: Melbourne SE
Car: MY07 GT-B t/b STI OBP 6MT - #244/300

Postby Arith » Thu Nov 20, 2008 1:36 pm

Haha. Feedback on it Chris?

But yeah, for anyone upgrading to the AVO top mount and too lazy to post up pics, just tell people to refer to my AVO post & pics. All Libs same same. :D

[ Former Liberty ... Slightly Modified -> Click
here for modifications & profile ]
User avatar
Arith
-stickered-
 
Posts: 6111
Joined: Mon Oct 08, 2007 2:05 am
Location: Sydney (Wes-Sieed!)
Car: MY11 Volvo S60 T6
Real name: Jim

Postby GTSPECB STI » Thu Nov 20, 2008 2:19 pm

LOL Adam you terrorist!! No problem with you posting pic of your cooler but I am curious to know why you went with the black one rather than silver? Simply for cosmetic reasons or other?
MY10 Forester XTP
GTSPECB STI
-stickered-
 
Posts: 1836
Joined: Tue Jun 19, 2007 4:26 pm
Location: Perth

Postby Arith » Thu Nov 20, 2008 2:25 pm

GTSPECB STI wrote:I am curious to know why you went with the black one rather than silver? Simply for cosmetic reasons or other?

To take a quote from the movie "Airplane" (or Flying High as it is called here in Australia for some reason):

"Adam likes his top mount intercoolers black .... like his men." :D

[ Former Liberty ... Slightly Modified -> Click
here for modifications & profile ]
User avatar
Arith
-stickered-
 
Posts: 6111
Joined: Mon Oct 08, 2007 2:05 am
Location: Sydney (Wes-Sieed!)
Car: MY11 Volvo S60 T6
Real name: Jim

Postby GTSPECB STI » Thu Nov 20, 2008 2:26 pm

LOL once you go black you never go back
MY10 Forester XTP
GTSPECB STI
-stickered-
 
Posts: 1836
Joined: Tue Jun 19, 2007 4:26 pm
Location: Perth

Postby chriskan » Thu Nov 20, 2008 2:34 pm

I was waiting a few days for the whole placebo effect thing to die down before I commented on it. But the car seems to get better once the ecu adapts to the extra airflow. Having said that, Melbourne weather has been all over the place so that could also have a noticeable effect on improved perfomance.

BUT, basically fitted it, reset the ecu and went for a [nice, quiet, legal :roll:] drive... anyway. What I've noticed:

- car seems to rev a lot easier
- boost seems to be coming on quicker, however haven't hooked up my gauge yet so can't prove that scientifically :)
- turbo whine is a lot more audible in the cabin
- fuel economy has remained around the same, although it seems to be running slightly richer now. That'll settle post tune.

Fitting took about 35-40 minutes. I wasn't rushing though. I reckon could be done in about 20-25 the next time around. The engine cover trimming took a bit longer than I expected as I didn't have a cutting bit for the dremel to suit plastic. I had to trip the lip off the top and bottom sections of the cover. The bottom two plastic clips wouldn't line up by about 1.5mm, so I couldn't get them in but I figured have the 2 bolts up top which AVO supplied would suffice :) I might give it another go this weekend to get the clips in.
MY07 GT-B T/B STi 6MT OBP
| PHAT Performance Quad Mufflers | HKS Panel Filter & removed resi + CAI pipe |
User avatar
chriskan
 
Posts: 389
Joined: Sun Nov 25, 2007 8:10 pm
Location: Melbourne SE
Car: MY07 GT-B t/b STI OBP 6MT - #244/300

Postby adam » Thu Nov 20, 2008 2:37 pm

GTSPECB STI wrote:LOL Adam you terrorist!! No problem with you posting pic of your cooler but I am curious to know why you went with the black one rather than silver? Simply for cosmetic reasons or other?


it's the way i like my cars and my women :wink: ... whats that dear?
sorry dear, of course what i meant to say was woman :roll:

so yes, cosmetics.
I spend most of my money on booze, fast cars and women, I just waste the rest...
User avatar
adam
 
Posts: 1431
Joined: Wed Feb 14, 2007 10:23 pm
Location: sydney

Postby chriskan » Thu Nov 20, 2008 9:49 pm

Dave, did you get the tune etc done?
MY07 GT-B T/B STi 6MT OBP
| PHAT Performance Quad Mufflers | HKS Panel Filter & removed resi + CAI pipe |
User avatar
chriskan
 
Posts: 389
Joined: Sun Nov 25, 2007 8:10 pm
Location: Melbourne SE
Car: MY07 GT-B t/b STI OBP 6MT - #244/300

Postby WhiteGTB » Thu Nov 20, 2008 10:39 pm

Very nice and damn, the black one looks heaps different :)

Adam, might have to pay you a visit to see it when you fit it.
User avatar
WhiteGTB
 
Posts: 3233
Joined: Sat Aug 18, 2007 2:41 am
Location: Sydney, NSW
Car: MY07 Legacy GT Spec B 6pd

Postby adam » Thu Nov 20, 2008 11:14 pm

Trieu wrote:Very nice and damn, the black one looks heaps different :)

Adam, might have to pay you a visit to see it when you fit it.


come over any time mate but unfortuately if you wanted to giggle at my mechanical ineptitude i slapped it on earlier today. i'd have to agree with everything that chriskan said except that what i've noticed about boost (only done about 50km's with no ecu reset) is that it seems the same early but gets alot more punch from high3~4 grand through to redline (which doesn't seem as absolute now)
:lol: could all be my imagination and excitement though. i'll post some pics in a jiffy in 'post your mods' and stop hijacking this thread though.
I spend most of my money on booze, fast cars and women, I just waste the rest...
User avatar
adam
 
Posts: 1431
Joined: Wed Feb 14, 2007 10:23 pm
Location: sydney

Next

Return to Post your mods

Who is online

Users browsing this forum: No registered users and 4 guests