I've done a couple of little bits and pieces recently, but none of the big things yet.
I cleaned up the stock rad lines, just soaked them and gave them a good scrub.
They look a whole lot better than before.
I also fixed my lightbar wiring, it now has three settings, off, on, and auto-on with hi-beams.
Unfortunately it has since stopped working, and I suspect the fuse holder as it was a bit dodgy when I first got the car, so I have another one ready to put in.
Finally, my TapTurn arrived today.
In under the steering wheel, on the right hand side, next to the fuse box is the relay. I found the easiest way to swap the module was to unclip the section using the little clips on the side.
This lets you access the relay a lot more easily.
Out with the old, in with the new.
New installed.
Clipped back in ready to go.
It works really well and is easy to use, I will get some video soon, but just using it today has made me realise how much better LED indicators would be.
Again, more to come, just waiting for parts to arrive.