by Spec BSC » Mon Jan 29, 2018 3:05 am
Time passes!!!!
So I went for mapping, the mapper said it was not possible to map the car in its current condition due to varies items, which all made sense as he talked me through them. Which meant another delay in getting all the parts together and then finding the time to fit them.
So the biggest change is getting the MAF mounted before the SC and maintaining 80 mm of straight pipe before and after the MAF.
So we started with a collection of parts.
![Image](https://vgy.me/uVMG65.jpg)
It took an entire day of fabrication to end with the following installation and also using a much larger air filter caused quite a few packaging issues.
![Image](https://vgy.me/vfun16.jpg)
![Image](https://vgy.me/VivQGE.jpg)
![Image](https://vgy.me/bKcoXA.jpg)
![Image](https://vgy.me/v4ckBl.jpg)
As this is a massive change from the current setup I am going to have drive to the mapper and then install all this which will mean taking the front bumper off as well.
In other news I have changed the front pads to DS2500 as the others were nearing the end.
![Image](https://vgy.me/XN6km7.jpg)
And finally the slow boat from Japan arrived bringing what I believe to be the first one in the UK of the Spec B (3.0 )half front bumper kit. I have acquired another front bumper with less damage than my current one, so I intend to get the bumper resprayed and then fit the new bumper and the half bumper together.
![Image](https://vgy.me/1HKQWv.jpg)
The first engine died after eating to much CAT
The second engine died of a broken piston
The third engine is in the car
The fourth engine is in the machine shop
So far: Rotrex Supercharger (16 psi) FMIC,DW300c fuel pump, ID1050 injectors
Producing 431bhp and 350 lb/ft torque on the Rotrex SC not finished yet
Raptor headers, 75mm Milltek exhaust with Quad tips,
Custom made 4032 forged pistons by JE Pistons, forged conrods, Exedy Clutch
K sport 8 pot front, 4 pot rears all on 330mm discs, Hel brake lines
Meister R coil overs, Whiteline 21mm rear ARB, Perrin end links and strengthening brackets
Complete Whiteline kit for the front suspension including steering rack
One off Carbon effect Front grill, Carbon lip spoiler, Exterior De-chromed, LED interior light conversion.
Recaro Leather front seats with all functionality.
Waist spoiler, Smoked rear lights,, LED sill plates, LED sidelights
Prodrive PFF7's 18x8, in Bronze shod with 235/40/18 Goodyears.