Cheers Benny,
Will I need a keyboard with the Android TV box for set up and control or can I use an Apple laptop connected to the Android box?
bigBADbenny wrote:I used a USB or BT keyboard and mouse as the setup with the supplied remote is a bit tedious.
Also cloud apps lastpass (passwords) and pocket (bookmarks) makes things easier. Buy a quality sheilded AV cable to reduce interference or try the suppression rings.
I'll dig up the Ebay listings for the parts that are known to work:)
Theoretically I can share my BtSsm backups which you can use to restore in your app which will get you started up nicely with gauges, settings & some my07 custom params if relevant etc.
The app can be configged even if the obdii isn't connected eg displayed on your tv.
bigBADbenny wrote:Kudos! It would be great if you could post a brief diy on how you approached the wbo2 via mod.
It was discussed recently on the LGT btssm thread here: http://legacygt.com/forums/showthread.p ... 9p132.html
Whilst loom kits from eg Mooresport and Tuning Alliance for CobbAccessport are available I'd rather diy it since it looks to be about $20 in parts.
Note also the conncetion schematic here, that takes care of the ECU's noisy ground vs quiet body grounds.
Also the scaling should be modified from 0-5V to 0.5-4.5V to give the ECU a buffer.
Users browsing this forum: No registered users and 17 guests