257 Hybrid

Posts specific to the 2.0 litre Turbo engine

257 Hybrid

Postby HighTech RedNeck » Sat Nov 14, 2015 6:36 pm

As most know i have just done a 257 Hybrid rebuild and its not starting.

Things i have checked:
Belt timing has been checked several times and rotated by hand with no noise or resistance
All Fuses
Fuel Supply
Fuel Injector signal
Engine Earth
CAS resistance 2020ohm
MAF

making a spark tester tomorrow but i do believe there is no spark at all, any thing else i can check before i push it out onto the street and set fire to it
Speed doesn't kill its the sudden stop that does.
HighTech RedNeck
 
Posts: 139
Joined: Sun Jul 28, 2013 4:59 pm
Location: Dalby, Qld
Car: 2005 Liberty GT 5M
Real name: Dru

Re: 257 Hybrid

Postby HighTech RedNeck » Sun Nov 15, 2015 8:44 am

still no go, add engine earth resistance 0.4 ohm

added a log while cranking

http://www.filehosting.org/file/details ... og0054.csv
Speed doesn't kill its the sudden stop that does.
HighTech RedNeck
 
Posts: 139
Joined: Sun Jul 28, 2013 4:59 pm
Location: Dalby, Qld
Car: 2005 Liberty GT 5M
Real name: Dru

Re: 257 Hybrid

Postby HighTech RedNeck » Sun Nov 15, 2015 10:05 am

I have live power to the coil plug and a good earth. no signal down the igniter wire even at connector B21.
Speed doesn't kill its the sudden stop that does.
HighTech RedNeck
 
Posts: 139
Joined: Sun Jul 28, 2013 4:59 pm
Location: Dalby, Qld
Car: 2005 Liberty GT 5M
Real name: Dru

Re: 257 Hybrid

Postby BillyCorgi » Sun Nov 15, 2015 10:17 am

Do you have the "Diagnostics for Engine Starting Failure" table from the service manual?
Get your Short Shift Adaptor viewtopic.php?f=68&t=30525
Get your Gear Shift Rejuvenation Kit viewtopic.php?f=68&t=31240
Get your Centre Differential Rebuild viewtopic.php?f=6&t=31089
Want a custom built Brake Cylinder Stopper? viewtopic.php?f=6&t=31321
Need to hire a Guard Rolling Machine? viewtopic.php?f=6&t=31899
Get your BillyCorgi's "Not-4-Wimps" Chilli Sauce
User avatar
BillyCorgi
 
Posts: 1804
Joined: Tue Aug 20, 2013 10:11 pm
Location: Bankstown Area, Sydney
Car: Liberty 3.0R-B Wagon E85 Flex Fuel
Real name: Peter
Profile URL: www.facebook.com/CorgiWerx

Re: 257 Hybrid

Postby HighTech RedNeck » Sun Nov 15, 2015 10:32 am

yep, thats what i am running threw
Speed doesn't kill its the sudden stop that does.
HighTech RedNeck
 
Posts: 139
Joined: Sun Jul 28, 2013 4:59 pm
Location: Dalby, Qld
Car: 2005 Liberty GT 5M
Real name: Dru

Re: 257 Hybrid

Postby HighTech RedNeck » Sun Nov 15, 2015 10:34 am

is the CAS the trigger for the ignition?
Speed doesn't kill its the sudden stop that does.
HighTech RedNeck
 
Posts: 139
Joined: Sun Jul 28, 2013 4:59 pm
Location: Dalby, Qld
Car: 2005 Liberty GT 5M
Real name: Dru

Re: 257 Hybrid

Postby BillyCorgi » Sun Nov 15, 2015 10:55 am

HighTech RedNeck wrote:is the CAS the trigger for the ignition?


There are four ignitors on the DOHC Turbo.
The ingnitors are powered from the ignition switch through fuse 12 and grounded by the ECM through pins 13 thru 16 - connector B21.
When the ECM opens these lines, the coil pack for the appropriate cylinder will fire.

By CAS do you mean Crank Angle Sensor?
There are three sensors on the turbo engine.
Crank Position Sensor (CPS)
Intake camshaft position sensor (LH & RH)
Exhaust camshaft position sensor (LH & RH)
Get your Short Shift Adaptor viewtopic.php?f=68&t=30525
Get your Gear Shift Rejuvenation Kit viewtopic.php?f=68&t=31240
Get your Centre Differential Rebuild viewtopic.php?f=6&t=31089
Want a custom built Brake Cylinder Stopper? viewtopic.php?f=6&t=31321
Need to hire a Guard Rolling Machine? viewtopic.php?f=6&t=31899
Get your BillyCorgi's "Not-4-Wimps" Chilli Sauce
User avatar
BillyCorgi
 
Posts: 1804
Joined: Tue Aug 20, 2013 10:11 pm
Location: Bankstown Area, Sydney
Car: Liberty 3.0R-B Wagon E85 Flex Fuel
Real name: Peter
Profile URL: www.facebook.com/CorgiWerx

Re: 257 Hybrid

Postby HighTech RedNeck » Sun Nov 15, 2015 11:38 am

yeah Crank angle sensor, the igniter wire to the coils are dead, no signal at all while cranking. so which is responsible for tell the ecu when to fire it
Speed doesn't kill its the sudden stop that does.
HighTech RedNeck
 
Posts: 139
Joined: Sun Jul 28, 2013 4:59 pm
Location: Dalby, Qld
Car: 2005 Liberty GT 5M
Real name: Dru

Re: 257 Hybrid

Postby BillyCorgi » Sun Nov 15, 2015 12:28 pm

You have checked continuity between the No.1 on E13; E32; E33; E34 and B135 No15; 16; 17; 18; respectively?
What does pins 15; 16; 17; 18 at the ecm do while ranking?
Has the insulation resistance between B135 No15; 16; 17; 18 and the engine ground been checked?
Cheers!
Get your Short Shift Adaptor viewtopic.php?f=68&t=30525
Get your Gear Shift Rejuvenation Kit viewtopic.php?f=68&t=31240
Get your Centre Differential Rebuild viewtopic.php?f=6&t=31089
Want a custom built Brake Cylinder Stopper? viewtopic.php?f=6&t=31321
Need to hire a Guard Rolling Machine? viewtopic.php?f=6&t=31899
Get your BillyCorgi's "Not-4-Wimps" Chilli Sauce
User avatar
BillyCorgi
 
Posts: 1804
Joined: Tue Aug 20, 2013 10:11 pm
Location: Bankstown Area, Sydney
Car: Liberty 3.0R-B Wagon E85 Flex Fuel
Real name: Peter
Profile URL: www.facebook.com/CorgiWerx

Re: 257 Hybrid

Postby HighTech RedNeck » Sun Nov 15, 2015 3:05 pm

only testing back to 21 due to multimeter cord length
Speed doesn't kill its the sudden stop that does.
HighTech RedNeck
 
Posts: 139
Joined: Sun Jul 28, 2013 4:59 pm
Location: Dalby, Qld
Car: 2005 Liberty GT 5M
Real name: Dru

Re: 257 Hybrid

Postby HighTech RedNeck » Sun Nov 15, 2015 3:32 pm

god damn I am retarded, I have been using resistance testing instead of continuity.

pete, I am using the coil plug on number 3 cylinder because it is easy to reach with out pulling shit apart. middle pin 1 E33 goes back to pin 12 on B21, is that right?
Speed doesn't kill its the sudden stop that does.
HighTech RedNeck
 
Posts: 139
Joined: Sun Jul 28, 2013 4:59 pm
Location: Dalby, Qld
Car: 2005 Liberty GT 5M
Real name: Dru

Re: 257 Hybrid

Postby HighTech RedNeck » Sun Nov 15, 2015 3:40 pm

testing continuity on pin 2 earth, no continuity but test light lights up when powered
Speed doesn't kill its the sudden stop that does.
HighTech RedNeck
 
Posts: 139
Joined: Sun Jul 28, 2013 4:59 pm
Location: Dalby, Qld
Car: 2005 Liberty GT 5M
Real name: Dru

Re: 257 Hybrid

Postby HighTech RedNeck » Sun Nov 15, 2015 4:18 pm

Earth Bat - alternator bracket
B135 P18 1.299 1.470
B135 P17 1.244 1.411
B135 P16 0.000 have plug off at coil
B135 P15 1.355 1.513
Speed doesn't kill its the sudden stop that does.
HighTech RedNeck
 
Posts: 139
Joined: Sun Jul 28, 2013 4:59 pm
Location: Dalby, Qld
Car: 2005 Liberty GT 5M
Real name: Dru

Re: 257 Hybrid

Postby BillyCorgi » Sun Nov 15, 2015 4:47 pm

Check here
http://imgur.com/TV23ZYo

Factory Service Manual says should be greater than 1 Mega-Ohm.
Check for short?
Get your Short Shift Adaptor viewtopic.php?f=68&t=30525
Get your Gear Shift Rejuvenation Kit viewtopic.php?f=68&t=31240
Get your Centre Differential Rebuild viewtopic.php?f=6&t=31089
Want a custom built Brake Cylinder Stopper? viewtopic.php?f=6&t=31321
Need to hire a Guard Rolling Machine? viewtopic.php?f=6&t=31899
Get your BillyCorgi's "Not-4-Wimps" Chilli Sauce
User avatar
BillyCorgi
 
Posts: 1804
Joined: Tue Aug 20, 2013 10:11 pm
Location: Bankstown Area, Sydney
Car: Liberty 3.0R-B Wagon E85 Flex Fuel
Real name: Peter
Profile URL: www.facebook.com/CorgiWerx

Re: 257 Hybrid

Postby HighTech RedNeck » Sun Nov 15, 2015 5:53 pm

got the wife to take a photo of the MM 1.470k would that be 1,470,000 ohm?

electrics aren't my forte and usually most of my work is just with a test light
Speed doesn't kill its the sudden stop that does.
HighTech RedNeck
 
Posts: 139
Joined: Sun Jul 28, 2013 4:59 pm
Location: Dalby, Qld
Car: 2005 Liberty GT 5M
Real name: Dru

Next

Return to 2.0T engine specific

Who is online

Users browsing this forum: No registered users and 2 guests