MY04 Liberty GT - FrankenStien - EOI welcome / FS

Show off what mods you've done to your car.

Re: MY04 Liberty GT - FrankenStien

Postby dr20t » Sat Feb 07, 2015 12:27 pm

Thanks

Gtb won't work with my engine. Single avcs on post facelift compared to dual avcs on prefacelift. Would require complete wiring harness and canbus sensor swap over which is not worth it

After tweaking my tune I am loving the 5eat so won't be giving that up anytime soon particularly with the cost and headache involved.

I guestimate the car is now making a genuine 370-380awkw and around 850nm of torque.

Mick
Addicted to corn juice....

My FrankenStien build thread here: viewtopic.php?t=14137
User avatar
dr20t
 
Posts: 4191
Joined: Sun Oct 23, 2011 10:43 pm
Location: South West Sydney NSW
Car: 04 Liberty GT Auto
Real name: Mick
Profile URL: viewtopic.php?t=14137

Re: MY04 Liberty GT - FrankenStien

Postby THE SpecB » Sat Feb 07, 2015 1:56 pm

dr20t wrote:Thanks

Gtb won't work with my engine. Single avcs on post facelift compared to dual avcs on prefacelift. Would require complete wiring harness and canbus sensor swap over which is not worth it

After tweaking my tune I am loving the 5eat so won't be giving that up anytime soon particularly with the cost and headache involved.

I guestimate the car is now making a genuine 370-380awkw and around 850nm of torque.

Mick


Ridiculously good :)
Newport Blueeeee
THE SpecB
 
Posts: 369
Joined: Fri Nov 14, 2014 5:03 pm
Car: Newport Blue SpecB GT

Re: MY04 Liberty GT - FrankenStien

Postby notmyrealname » Sat Feb 07, 2015 3:10 pm

dr20t wrote:Thanks

Gtb won't work with my engine. Single avcs on post facelift compared to dual avcs on prefacelift. Would require complete wiring harness and canbus sensor swap over which is not worth it

After tweaking my tune I am loving the 5eat so won't be giving that up anytime soon particularly with the cost and headache involved.

I guestimate the car is now making a genuine 370-380awkw and around 850nm of torque.

Mick


I can't even imagine what that would feel like to drive...mindboggling...I'm off to buy a lotto ticket.
cheers, David

MY04 2.5i Wagon | DBA T2 rotors | Bendix pads | Bilsteins | OEM Sports Grille | Custom hail damage
User avatar
notmyrealname
 
Posts: 81
Joined: Sat Jan 03, 2015 11:16 pm
Location: Brisbane
Car: 2004 2.5i wagon
Real name: David

Re: MY04 Liberty GT - FrankenStien

Postby dr20t » Sat Feb 07, 2015 3:23 pm

Just logged 5.7g/ rev of load and 589g/second of mass airflow

This is @29psi with 11.9:1 afr logged on wideband
Addicted to corn juice....

My FrankenStien build thread here: viewtopic.php?t=14137
User avatar
dr20t
 
Posts: 4191
Joined: Sun Oct 23, 2011 10:43 pm
Location: South West Sydney NSW
Car: 04 Liberty GT Auto
Real name: Mick
Profile URL: viewtopic.php?t=14137

Re: MY04 Liberty GT - FrankenStien

Postby jakey » Sat Feb 07, 2015 4:03 pm

brb coming north with a few diapers
-Jakey-UBARU
User avatar
jakey
 
Posts: 1083
Joined: Sun Jan 29, 2012 12:13 am
Location: Melbourne
Car: UBARU - 2005 MY06 3.0R
Real name: Jake
Profile URL: viewtopic.php?f=10&t=15489

Re: MY04 Liberty GT - FrankenStien

Postby Deep Heat » Sat Feb 07, 2015 4:15 pm

you know surprisingly much about drugs for a bank manager
Jack_Keaka wrote: I like my women like subarus, box explodes and does a head easily.
Deep Heat
formerly Twinkle
 
Posts: 1403
Joined: Mon Sep 09, 2013 10:01 pm
Location: Kellyville, NSW

Re: MY04 Liberty GT - FrankenStien

Postby bigBADbenny » Sat Feb 07, 2015 4:21 pm

If big port heads can be adapted to the ej255, why not the whole engine in a postfl?
You'd lose the exhaust avcs...

Anyway glad you're enjoying this ride :mrgreen:
User avatar
bigBADbenny
 
Posts: 10465
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop

Re: MY04 Liberty GT - FrankenStien

Postby dr20t » Sat Feb 07, 2015 5:54 pm

The beauty of this motor are the heads

Losing them would be sacrilege :D
Addicted to corn juice....

My FrankenStien build thread here: viewtopic.php?t=14137
User avatar
dr20t
 
Posts: 4191
Joined: Sun Oct 23, 2011 10:43 pm
Location: South West Sydney NSW
Car: 04 Liberty GT Auto
Real name: Mick
Profile URL: viewtopic.php?t=14137

Re: MY04 Liberty GT - FrankenStien

Postby KiDo_Tuning » Sat Feb 07, 2015 6:55 pm

Get a MAC 4 port valve. 2 ports go to the WG(top and bottom nipple fittings are used) and one pressure and one pre turbo fitting.

Would only need 15% duty to get to target boost.

http://pics.fullavit.com/4port/diagram.png

This but give it a vacuum source instead of venting
KiDo Racing Tunes Info: HERE

Great minds discuss ideas;
Average minds discuss events;
Small minds discuss people
User avatar
KiDo_Tuning
 
Posts: 2801
Joined: Sun Jun 10, 2012 11:53 pm
Car: Subarus + Nissans
Real name: Matt

Re: MY04 Liberty GT - FrankenStien

Postby KiDo_Tuning » Sat Feb 07, 2015 6:56 pm

HardwareBoB wrote:They are all basically the same, just slightly different packaging.


Majority are MAC Valves. Perrin has a completely different design though

http://farm2.static.flickr.com/1287/466 ... 57dfd0.jpg
KiDo Racing Tunes Info: HERE

Great minds discuss ideas;
Average minds discuss events;
Small minds discuss people
User avatar
KiDo_Tuning
 
Posts: 2801
Joined: Sun Jun 10, 2012 11:53 pm
Car: Subarus + Nissans
Real name: Matt

Re: MY04 Liberty GT - FrankenStien

Postby Bezzza » Sat Feb 07, 2015 11:27 pm

Check your thread regularly Mick. Most of the time I have no idea what exactly you are on about but I know it's serious numbers and serious black lines on the road ;)
850nm torque is insane!

Keep it up :good:
mod -> tune -> drive -> get bored -> repeat...
User avatar
Bezzza
 
Posts: 721
Joined: Sun Feb 05, 2012 11:08 pm
Location: Perth, Western Australia
Car: MY08 tb STi Wagon, 5AT
Real name: Ian
Profile URL: viewtopic.php?f=10&t=17319

Re: MY04 Liberty GT - FrankenStien

Postby dr20t » Sun Feb 08, 2015 9:37 am

Thanks bezza. Although in truth it will only leave black lines if I boost launch it


KiDo_Tuning wrote:
HardwareBoB wrote:They are all basically the same, just slightly different packaging.


Majority are MAC Valves. Perrin has a completely different design though

http://farm2.static.flickr.com/1287/466 ... 57dfd0.jpg



Matt - while I have your attention, can you tell me your thoughts on dual avcs tuning for spool? I'm looking at your maps compared to the ones I've come up with and trying to make sense of a couple of things.
Addicted to corn juice....

My FrankenStien build thread here: viewtopic.php?t=14137
User avatar
dr20t
 
Posts: 4191
Joined: Sun Oct 23, 2011 10:43 pm
Location: South West Sydney NSW
Car: 04 Liberty GT Auto
Real name: Mick
Profile URL: viewtopic.php?t=14137

Re: MY04 Liberty GT - FrankenStien

Postby dawesy » Sun Feb 08, 2015 2:38 pm

Glad to see you're making more progress man.
Can't wait to see how it goes now
User avatar
dawesy
 
Posts: 584
Joined: Thu Oct 11, 2012 12:07 pm
Location: parramtta area
Car: my05 3.0R-B sedan
Real name: Chris

Re: MY04 Liberty GT - FrankenStien

Postby dr20t » Sun Feb 08, 2015 3:02 pm

Thanks Dawesy

Should come out when I'm at Wsid next if you can

After work maybe this Wednesday?
Addicted to corn juice....

My FrankenStien build thread here: viewtopic.php?t=14137
User avatar
dr20t
 
Posts: 4191
Joined: Sun Oct 23, 2011 10:43 pm
Location: South West Sydney NSW
Car: 04 Liberty GT Auto
Real name: Mick
Profile URL: viewtopic.php?t=14137

Re: MY04 Liberty GT - FrankenStien

Postby KiDo_Tuning » Sun Feb 08, 2015 8:36 pm

dr20t wrote:Thanks bezza. Although in truth it will only leave black lines if I boost launch it

Matt - while I have your attention, can you tell me your thoughts on dual avcs tuning for spool? I'm looking at your maps compared to the ones I've come up with and trying to make sense of a couple of things.


Send me an email. I am up to date nearly so can get to it by Monday night :)
KiDo Racing Tunes Info: HERE

Great minds discuss ideas;
Average minds discuss events;
Small minds discuss people
User avatar
KiDo_Tuning
 
Posts: 2801
Joined: Sun Jun 10, 2012 11:53 pm
Car: Subarus + Nissans
Real name: Matt

PreviousNext

Return to Post your mods

Who is online

Users browsing this forum: No registered users and 2 guests