by Spec BSC » Thu Aug 14, 2014 6:57 am
The strip down report goes as follows.
Micro polish the bearing journals on the crank.
Rebore the cylinders.
Fit oversize pistons with new rings.
Fit new bearings both main and big end
New gasket set
Replace 8 bent valves
Reseat all 16 valves
Fit new timing chain kit.
So not to much then
The first engine died after eating to much CAT
The second engine died of a broken piston
The third engine is in the car
The fourth engine is in the machine shop
So far: Rotrex Supercharger (16 psi) FMIC,DW300c fuel pump, ID1050 injectors
Producing 431bhp and 350 lb/ft torque on the Rotrex SC not finished yet
Raptor headers, 75mm Milltek exhaust with Quad tips,
Custom made 4032 forged pistons by JE Pistons, forged conrods, Exedy Clutch
K sport 8 pot front, 4 pot rears all on 330mm discs, Hel brake lines
Meister R coil overs, Whiteline 21mm rear ARB, Perrin end links and strengthening brackets
Complete Whiteline kit for the front suspension including steering rack
One off Carbon effect Front grill, Carbon lip spoiler, Exterior De-chromed, LED interior light conversion.
Recaro Leather front seats with all functionality.
Waist spoiler, Smoked rear lights,, LED sill plates, LED sidelights
Prodrive PFF7's 18x8, in Bronze shod with 235/40/18 Goodyears.