JSLAYZ - 283awkw pics pg 39,41,53,55,63

Show off what mods you've done to your car.

Re: Profile - JSLAYZ - Updated pics pg 39, Gold Brick pg 41

Postby jaydece » Mon Jun 23, 2014 10:20 am

Looks Hot! :bb:

Awesome! :twisted:
~JUSZTN~

** Our Turbo Lag Gives Those v8's A Chance **

History - MY07 Liberty TBSTI 6SPD Sedan
265kw atw on P100
290kw atw on E85 (fuel pump limited)


Past - MY16 Audi S3 Sedan
249kw atw on P98 (APR stage 1)

Present - MY18 Audi RS3 Sedan (His)
384kw atw on E85 (APR stage 2)

Present - MY17 VW Tiguan 162 R line (Hers)
User avatar
jaydece
 
Posts: 1632
Joined: Fri Apr 23, 2010 11:21 pm
Location: VIC, Berwick 3806
Car: MY18 Audi RS3 Sedan 7 SPD DSG
Real name: Justin
Profile URL: viewtopic.php?f=10&t=11864

Re: Profile - JSLAYZ - Updated pics pg 39, Gold Brick pg 41

Postby bigBADbenny » Mon Jun 23, 2014 11:06 am

Heat exchanger is bigger than many FMIC's!
Is that WA spec or something? :mrgreen:
User avatar
bigBADbenny
 
Posts: 10476
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop

Re: Profile - JSLAYZ - Updated pics pg 39, Gold Brick pg 41

Postby <GB> » Mon Jun 23, 2014 11:48 am

So the reo is in tack other than the small section where the bleed point is? I didn't think the 3.5in one would fit I was looking at the 2in one
<GB>
 
Posts: 2290
Joined: Tue Nov 22, 2011 9:05 am
Location: MELBOURNE
Car: 08 Liberty STI
Profile URL: viewtopic.php?f=18&t=14660

Re: Profile - JSLAYZ - Updated pics pg 39, Gold Brick pg 41

Postby jslayz » Mon Jun 23, 2014 3:07 pm

<GB> wrote:So the reo is in tack other than the small section where the bleed point is? I didn't think the 3.5in one would fit I was looking at the 2in one


Yep reo intact except for bleed tap.
Haha, biggest I could shoehorn in!
J spec.
Very challenging install!

Front bar will be really sliced up. Be barely recognizable when im finished!

So close!

J
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J

Re: Profile - JSLAYZ - Updated pics pg 39, Gold Brick pg 41

Postby <GB> » Mon Jun 23, 2014 3:44 pm

nice! I love the idea of the reo not being cut, mine has a big section cut out and if I went wta I could get a new one and it would look more legal.
<GB>
 
Posts: 2290
Joined: Tue Nov 22, 2011 9:05 am
Location: MELBOURNE
Car: 08 Liberty STI
Profile URL: viewtopic.php?f=18&t=14660

Re: Profile - JSLAYZ - Updated pics pg 39, Gold Brick pg 41

Postby jslayz » Mon Jun 23, 2014 4:44 pm

<GB> wrote:nice! I love the idea of the reo not being cut, mine has a big section cut out and if I went wta I could get a new one and it would look more legal.


Reserve your judgment till you see how modded my front bar ends up!!!
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J

Re: Profile - JSLAYZ - Updated pics pg 39, Gold Brick pg 41

Postby <GB> » Mon Jun 23, 2014 6:15 pm

jslayz wrote:
<GB> wrote:nice! I love the idea of the reo not being cut, mine has a big section cut out and if I went wta I could get a new one and it would look more legal.


Reserve your judgment till you see how modded my front bar ends up!!!

bit like that huh? my front bar has been cut a little but I don't want to cut much if anymore from it, plus I think we have different bars anyway!
<GB>
 
Posts: 2290
Joined: Tue Nov 22, 2011 9:05 am
Location: MELBOURNE
Car: 08 Liberty STI
Profile URL: viewtopic.php?f=18&t=14660

Re: Profile - JSLAYZ - Updated pics pg 39, Gold Brick pg 41

Postby shav » Thu Jun 26, 2014 10:33 am

A lot of work there. But no doubt will be epic once all finished.
Cheers
Shav

MY07 Subaru Liberty GT Premium Sedan | HKS Panel filter | Pierburg 3 port | Whiteline adj sways F&R | Cusco HD mounts | Whiteline HD front sway links | Anycarlink AL-1080B | Ultrex s/s 3" CBE | Ultrex PU lip spoiler | Invidia s/s dump pipe and 100cel cat | KiDo tuned | DBA T2 rotors | Intima SS brake pads | Mishimoto TMIC | Koya ISR7 wheels | 265L Kobe fuel pump | Diamond Works SI Drive dial | Bilsteins

COSMETIC MODS ON THE WAY

My other toys:
2012 Focus Cayo 2.0 road bike
2015 Cervelo S5 VWD road bike
User avatar
shav
 
Posts: 3609
Joined: Tue Jun 26, 2012 12:01 pm
Location: Adelaide, Southern Suburbs
Car: MY07 Subaru Liberty GT Premium
Real name: Shav
Profile URL: viewtopic.php?f=10&t=18915&start=480

Re: Profile - JSLAYZ - Updated pics pg 39, Gold Brick pg 41

Postby jslayz » Thu Jun 26, 2014 3:19 pm

Thanks. Hope so.
Installing water pump tonight.
Wta will be finished then but intake one hose that is not here is holding up the show!!
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J

Re: Profile - JSLAYZ - Updated pics pg 39, Gold Brick pg 41

Postby jslayz » Fri Jun 27, 2014 1:55 am

I have installed the pump and finished the electrics.

Check my work, install hose and WTA mount bars tomorrow night, bleed the WTA system and start her up !!!

Maybe some putt putting around.......

J
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J

Re: Profile - JSLAYZ - Updated pics pg 39, Gold Brick pg 41

Postby Brunsy3.0 » Fri Jun 27, 2014 8:41 am

A hell of an effort hoping the results are what your expecting
....THE WHITEWASH....
User avatar
Brunsy3.0
 
Posts: 1027
Joined: Tue Aug 30, 2011 7:01 pm
Location: Katherine, NT
Car: 07 3.0 Liberty Spec. B pearl white
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=21059

Re: Profile - JSLAYZ - Updated pics pg 39, Gold Brick pg 41

Postby Sean82 » Fri Jun 27, 2014 4:04 pm

Holy Jeebus :shock:
This is getting better and better!

Fantastic effort J
Current: MY04 LGT 5EAT Wagon
Previous: MY11 Forester S-Edition VF52|ID1000s|Stuff|E85|12.9s @ 106
User avatar
Sean82
 
Posts: 459
Joined: Tue May 14, 2013 10:44 am
Location: Sydney
Car: MY04 GT with JDM GRB EJ207 swap
Real name: Sean

Re: Profile - JSLAYZ - Updated pics pg 39, Gold Brick pg 41

Postby jslayz » Fri Jun 27, 2014 7:43 pm

Dammit. Got problems at work clients ..
The start is delayed till tomorrow now. .. :cry:
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J

Re: Profile - JSLAYZ - Updated pics pg 39, Gold Brick pg 41

Postby jslayz » Sat Jun 28, 2014 11:38 pm

Started tonight.......
Makes crazy noises.....
Its ALIVE and much more responsive
.
Get front bar on on Tuesday night.

Farq it just sounds so good!!!

So excited now for the final tune :D 8)

J
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J

Re: Profile - JSLAYZ - Updated pics pg 39, Gold Brick pg 41

Postby Sean82 » Sun Jun 29, 2014 8:39 am

:clapping: :clapping: :clapping: :clapping: :clapping: :yahoo: :yahoo: :yahoo: :yahoo: :yahoo:
Current: MY04 LGT 5EAT Wagon
Previous: MY11 Forester S-Edition VF52|ID1000s|Stuff|E85|12.9s @ 106
User avatar
Sean82
 
Posts: 459
Joined: Tue May 14, 2013 10:44 am
Location: Sydney
Car: MY04 GT with JDM GRB EJ207 swap
Real name: Sean

PreviousNext

Return to Post your mods

Who is online

Users browsing this forum: No registered users and 4 guests