4GEN Liberty and Legacy 3.0 Exhaust headers

[Out6ack]

We are also about to deal with some very severe weather which may damage infrastructure and disable services for a few days also

You cane toads sure get your share of supercharged weather up there!
Hopefully a lot more subdued than last year's cyclones. Hope it passes over without incident mate.

[Tradewind]

Update

The cargo has arrived - absolutely safe and sound

Everything is prepacked so we have very little to do except for cutting the 2 bolt flange plates for exhaust and adding stickers in each box.

The quality is just breath taking - even better than the sample

You will receive

1 x set of headers
1 x set of engine to header gaskets
1 x set of 2 bolt flange gaskets
1 x set of 2 bolt flanges MILD STEEL MATERIAL
1 x sticker

As you all well know in the past I never supplied engine gaskets - now you get them.

Contemplating going with IPEC courier service for everyone except those who have only mailboxes

If going to mailboxes thats no problem - just let me know when I accept your order.

The price for one complete header set is AUD$390

Courier Cost is $65 flat rate
Aust Post is same for standard post.
Express post will be $90++

[nhimsta]

Thanks tim , where do I send my money
Looking forward to seeing them and the quality .

Appreciate your time and effort you've put into getting this happening .

[lokyb]

To clarify, postage via Australia post will be the same as courier? Or less?
Also, will we still be purchasing through eBay as previously mentioned? Thanks

[Tradewind]

To clarify, postage via Australia post will be the same as courier? Or less?
Also, will we still be purchasing through eBay as previously mentioned? Thanks

Lokyb

See below

[Tradewind]

Update

The cargo has arrived - absolutely safe and sound

Everything is prepacked so we have very little to do except for cutting the 2 bolt flange plates for exhaust and adding stickers in each box.

The quality is just breath taking - even better than the sample

You will receive

1 x set of headers
1 x set of engine to header gaskets
1 x set of 2 bolt flange gaskets
1 x set of 2 bolt flanges MILD STEEL MATERIAL
1 x sticker

As you all well know in the past I never supplied engine gaskets - now you get them.

Contemplating going with IPEC courier service for everyone except those who have only mailboxes

If going to mailboxes thats no problem - just let me know when I accept your order.

The price for one complete header set is AUD$390

Courier Cost (IPEC) is $65 flat rate
Aust Post is same for standard post - $52
Express post will be $90++

[chanham]

thanks for the update.

Are you going to allow multiple sets under one order?

try to sort out another perth member and me.

[RX25SE]

Collecting the items shortly

now the hard work begins and also adding the rest of the parts to them

The headers will not be offered for sale until approx mid next week - you will be dutifully updated - as always.

Laser cutting of flanges will happen tomorrow, then gaskets and bolts to add in also.

We are also about to deal with some very severe weather which may damage infrastructure and disable services for a few days also

Hope the weather passes without incident mate.

Are the flanges in stainless or mild steel?

Just thinking what I need to weld them to the engine pipes.

[ace.k]

Woo!!! cant wait =)

[Tradewind]

I have updated the website this morning - shows the header options and the costs

The units are not ready to sell yet, that's early next week

http://www.raptorsc.com.au/kits.php?id=70

[Tradewind]

The 2 bolt flange plates that you have welded onto your existing exhaust are MILD STEEL MATERIAL.

[Tradewind]

Updating all

A single set of headers was posted out yesterday to a forum member - to confirm these units fit as the first set did. That process should be completed by Tuesday afternoon this coming week.

[Enigma]

Awesome news - can't wait to pay for my set!
Is it possible to pre-pay for them to ensure we don't miss out?

Hope all is well with the weather up there too.

Daniel

[RX25SE]

The 2 bolt flange plates that you have welded onto your existing exhaust are MILD STEEL MATERIAL.

Perfect!

[RX25SE]

Awesome news - can't wait to pay for my set!
Is it possible to pre-pay for them to ensure we don't miss out?

Happy to do this, as I will be away for a few days next week.