Member Profile - chubbs Update 10/9/16

[shav]

Awesome. Just goes to show how much improvement there is with a dump and mid pipe done.

[bass_straitener]

Thats a pretty good result. I noticed you did the MRT Dump and PHAT quads, does that include the mid pipe upgrade too? Also, how do you attribute the filter/intake upgrade to the overall result?

Yeh upgraded the center pipe also to 3inch. The intake hasn't made much difference to the stock intake it just makes more noise.

I'd recommend for most people to get rid of the pod filter till your tune is sorted and the MAF scaled properly.

They can cause more trouble than they're worth on a mildly modified setup.

If after a little more induction noise, look at a resonator delete and perhaps an Apexi panel filter or the like.

[shav]

Thats a pretty good result. I noticed you did the MRT Dump and PHAT quads, does that include the mid pipe upgrade too? Also, how do you attribute the filter/intake upgrade to the overall result?

Yeh upgraded the center pipe also to 3inch. The intake hasn't made much difference to the stock intake it just makes more noise.

I'd recommend for most people to get rid of the pod filter till your tune is sorted and the MAF scaled properly.

They can cause more trouble than they're worth on a mildly modified setup.

If after a little more induction noise, look at a resonator delete and perhaps an Apexi panel filter or the like.

That's all I did Bruce. Just the HKS panel filter and tune. But the dump and 3" mid pipe are next on the list.

[chubbs]

Update:

Installed a Hyperflow intake, not as stealth as the Apexi with the AVO box but i like it. Plus more room for possible front mount in the future.







Got a full set of front and rear DBA 4000 series rotor to go on. Thanks to Owen




Recently id like to thanks Owen, Brian, Justin and Phil Lowe for helping me sort out some issues with my tune, i had some timing issues which now have been sorted with the help of these guys they are educating me well and im learning more and more each day. Thanks again guys!

[cruisn]

Cars looking schmick.

[Boostaddict]

First off .... Your car is looking shit hot.!!! Love it!!

Second, why go from a Avo inclosed box to a hyperflow unit?

I have the hyperflow and want to box it up for legality wise.!!

[chubbs]

First off .... Your car is looking shit hot.!!! Love it!!

Second, why go from a Avo inclosed box to a hyperflow unit?

I have the hyperflow and want to box it up for legality wise.!!

Thanks mark i must be doing it right for you to like it


Thanks Boost, the AVO box is good and everything but the Hyperflow one seals off like a box also in the guard, i like it because it gives more room in the engine bay for future mods eg. catch can, FMIC.

[Boostaddict]

Fair enough man.!!

My AVO fmic piping fits around my hyperflow intake no dramas!! Its the cold side that is the issue.!!

I have the stuff and will be making a custom box.... Its just on the list of things to do !!

[jaydece]

Looking good alexis

nice intake pipe setup too......copy cat

[owen]

Coming along nicely buddy. I'd say it's almost time the little snail got a bigger home

[chubbs]

Coming along nicely buddy. I'd say it's almost time the little snail got a bigger home

All in good time mate. got to get some other shit out of the way first the i can look at bigger turbo

[chubbs]

Mini Update:

Finally installed my new rotors. im very happy with them!
After a few hours, few beers and alot of swearing, managed to fit them up nicely. Thanks Owen and Callum (C-Shell) for helping out.
I think next ill paint my Brembos but unsure on colour. Any suggestions?

[shav]

they incredible Chubbs. Great job. I vote to leave the calipers the gold color. I think it looks classy on a black car.

[cruisn]

A few hours to fit rotors? Your doing it wrong.

[chubbs]

Thanks Shav

A few hours to fit rotors? Your doing it wrong.

it only took a few hours due to beer consumption, and lots of talking shit. If we did it in the daylight and didnt fk around could of had it done in an hours.