Learning View Snapshots \ Discussions

[bigBADbenny]

My LV from today's meet.
Bruce: "redo your AFR ranges to stop OL changes. And redo rpm ranges for better resolution to find exactly where the knock is occurring."
Apparently this is done in the tune itself and ill be learning how to with Bruce's help

[bigBADbenny]

Chubbs... Just quote this post to comment.

[bigBADbenny]

Maurice

[bigBADbenny]

Owen

[bigBADbenny]

Jakey's unsupported ECU

Just quote these posts to include the linked pics.

[KiDo_Tuning]

Owen

That knock will be from the O2 sensor failure having no closed loop

[KiDo_Tuning]

My LV from today's meet.
Bruce: "redo your AFR ranges to stop OL changes. And redo rpm ranges for better resolution to find exactly where the knock is occurring."
Apparently this is done in the tune itself and ill be learning how to with Bruce's help

In EcuFlash
Open the Ignition Timing - Knock Control folder
Modify the Fine Correction Rows (RPM) table
Modify the Fine Correction Columns (Load)
Modify the Fine Correction Range (Load) and lift it above 2.55 and 2.6g/rev if they are still set at factory to 3.55 and 3.6 since the ECU will not register/ignores FLKC in LV since running more boost means you run more load This is why the stock STi MY08+ has a value of 4.8

[bigBADbenny]

My fear is healthy fear

Cheers!!!

[jakey]

Jakey's unsupported ECU

Just quote these posts to include the linked pics.

I feel so special!

Matt has said that if I rev the engine with it plugged in it should create a snapshot? Otherwise have to get on my knees to some dude on Romraider forums to add support for it.

I am confuse

[KiDo_Tuning]

Jakey's unsupported ECU

Just quote these posts to include the linked pics.

I feel so special!

Matt has said that if I rev the engine with it plugged in it should create a snapshot? Otherwise have to get on my knees to some dude on Romraider forums to add support for it.

I am confuse

Micro SD car in the tactrix with the right logcfg.txt file will let you log the IAM, the knock count and the AF learning values

[jakey]

Jakey's unsupported ECU

Just quote these posts to include the linked pics.

I feel so special!

Matt has said that if I rev the engine with it plugged in it should create a snapshot? Otherwise have to get on my knees to some dude on Romraider forums to add support for it.

I am confuse

Micro SD car in the tactrix with the right logcfg.txt file will let you log the IAM, the knock count and the AF learning values

What does that file need to look like? I assume this info is freely available? Is it something Benny would capable of doing?

[bigBADbenny]

Yep I can do that. Just need a list of required parameters.
I've used the online config generator, but had to edit the text for the log.chg file to work properly. Typos!

[chubbs]

Chubbs... Just quote this post to comment.

doing another learning view on it with phil lowe on tuesday and the taking it from there, i will let you know how it all goes, cheers for your help benny!

[KiDo_Tuning]

Yep I can do that. Just need a list of required parameters.
I've used the online config generator, but had to edit the text for the log.chg file to work properly. Typos!

There is a few online generators

http://www.verticaltier.net/configtool/logger.php is good more most setups but is no longer supported as the logcfg.exe file updates directly from the RR logger.xml which means late model ECU's and newer logging definitions are instantly available Since the mentioned H6 ECU(D2ZY101H, same ROM as Veloci) is not supported in the online tool either

Online log generator definitely does not have the Calculated Engine Torque Limiter logging parameter

[bigBADbenny]

I'm good for relearning how to reverse engineer that if possible

If I knew what it was